6.9 A convergent-divergent nozzle is fixed on the side of a vessel containing air at 10 bar abs and 80 °C. The discharged air exerts a force of 11.1 kN on the vessel. If the absolute pressure at the outlet is 1 bar, compute: a- Mach number for the discharged air b- Area of the throat and outlet

6.9 A convergent-divergent nozzle is fixed on the side of a vessel containing air at 10 bar abs and 80 °C. The discharged air exerts a force of 11.1 kN on the vessel. If the absolute pressure at the outlet is 1 bar, compute: a- Mach number for the discharged air b- Area of the throat and outlet

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A flow with Mach number M1 = 2 and pressure p1 = 1 atm is turned away from itself twice,first through an angle of 10 deg and then through a second angle of 20 deg. Compute the Machnumber and the static pressure downstream of the second turn. Then, suppose that the original flow(M1 = 2 and p1 = 1 atm) is turned away from itself through a single turn of 30 deg. Compute theMach number and static pressure downstream of this turn, and show that the values are the sameas for the first flow with two turns totaling 30 deg.3
A certain nozzle is designed to expand air from stagnation conditions of 1.38 MPa and 200◦C to 0.138 MPa. The mass rate of flow is designed to be 4.5 kg/s. Suppose this nozzle is used in conjunction with a blowdown wind-tunnel facility so that the nozzle is suddenly allowed to discharge into a perfectly evacuated tank. What will the temperature of the air in the tank be when the pressure in the tank equals 0.138 MPa? Assume that the tank is perfectly insulated and that air behaves as a perfect gas. Assume that the expansion in the nozzle is isentropic
Air enters a convergent-divergent nozzle at a temperature of 400K and a pressure of 10 atm. The throat area is one-half that of the discharge of the divergent section. Assuming the Mach number in the throat is 0.75, what are the values of the following quantities at the throat: pressure(atm), temperature(K), linear velocity(m/s), density(kg/m3), and mass velocity(kg/m2s)? What are the values of p*(in atm), T*(in K), u*(in m/s), and G* (in kg/m2.s) corresponding to reservoir conditions? Write your answers according to order of properties asked.
Consider the Gulfstream IV flying at Mach = 0.8 at an altitude with atmospheric pressure of 33,283.40-Pa. Calculate thrust required assuming a weight of 73,000-lb. Airplane data: S = 950 ft2, AR = 5.92, CDo = 0.015, and K = 0.08. The thrust required. (in lbf)
Air enters a convergent-divergent nozzle at a temperature of 400K and a pressure of 10 atm. The throat area is one-half that of the discharge of the divergent section. Assuming the Mach number in the throat is 0.75, what are the values of the following quantities at the throat: pressure(atm), temperature(K), linear velocity(m/s), density(kg/m3), and mass velocity(kg/m2s)?
A double-tank system in Fig. has two identical convergingnozzles of 1-in2 throat area. Tank 1 is very large,and tank 2 is small enough to be in steady-flow equilibriumwith the jet from tank 1. Nozzle flow is isentropic,but entropy changes between 1 and 3 due to jet dissipationin tank 2. Compute the mass flow.
In Fig. water exits from a nozzle into atmosphericpressure of 101 kPa. If the fl ow rate is 160 gal/min and frictionis neglected, what is the gage pressure at section 1?( a ) 1.4 kPa, ( b ) 32 kPa, ( c ) 43 kPa, ( d ) 29 kPa, ( e ) 123 kPa
Consider the Gulfstream IV flying at Mach = 0.8 at an altitude with atmospheric pressure of 33,283.40-Pa. Calculate thrust required assuming a weight of 73,000-lb. Airplane data: S = 950 ft2, AR = 5.92, ?Do = 0.015, and K = 0.08. The thrust required. (in lbf)
In the test section of a supersonic wind tunnel, a Pitot tube in the flowreads a pressure of 1.13 atm. A static pressure measurement (from apressure tap on the sidewall of the test section) yields 0.1 atm. Calculatethe Mach number of the flow in the test section.
At the point where the air enters the convergent nozzle, its static pressure is 150 kPa, its stopping temperature is 327 K, and its speed is 71 m/s. If the nozzle opens to an environment with a back pressure of 100 kPa, the static pressure at the outlet section and What is the Mach number?
The convergent-divergent nozzle in Figure 22 expands and accelerates dry air to supersonic speeds at the outlet, where p2 = 8kPa and T2 = 240K. At the throat p1 = 284 kPa, T1 = 665 K and V1 = 517 m / s. Assuming steady and compressible flow of an ideal gas, estimate (a) the mass flow wn kilograms per hour, (b) the velocity V2, and (c) the match number Ma2
Air (diatomic, MW = 28.8664 g/mol) at 1.7 atm gage (where Pam = 1 atm) and 15°C enters a 70-m long horizontal 75-mm-ID steel pipe (€ = 4.6(10) m). The velocity at the entrance of the pipe is 60 m/s. Assuming isothermal flow, what is the absolute pressure (atm) at the discharge end of the line? Use Churchill equation for the friction factor.