8. A steam condenser receives 39.68 English Ton per hour of steam with an enthalpy of 1,104.97 BTU/lb. Steam condenses into liquid and leaves with an enthalpy of 68.79 BTU/b. Cooling water passes through the condenser with temperature increases from 55.4°F to 75.2° F. Calculate the volumetric water flow in gal/min. a.) 7,372 gpm b.) 8,294 gpm c.) 9,118 gpm d.) 8,814 gopm

8. A steam condenser receives 39.68 English Ton per hour of steam with an enthalpy of 1,104.97 BTU/lb. Steam condenses into liquid and leaves with an enthalpy of 68.79 BTU/b. Cooling water passes through the condenser with temperature increases from 55.4°F to 75.2° F. Calculate the volumetric water flow in gal/min. a.) 7,372 gpm b.) 8,294 gpm c.) 9,118 gpm d.) 8,814 gopm

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter39: Residential Energy Auditing

Section: Chapter Questions

Problem 4RQ: Performing a home energy audit starts with a visualinspection of a home and its energy systems which...

See similar textbooks

Similar questions

3. Steam enter a turbine with an enthalpy of 1292 Btu/lb anf leaves with an enthalpy of 1098 Btu/lb. The transferred heat is 13 BTU/lb. What is the work in BTU/min an in h for a flow of 2 lb/sec? 3 decimal in final answer pls
Pls. Answer thank you! A cooling tower has an efficiency of 65%. Water enters the tower at 55°C. The wet bulb temperature of surrounding air is 27°C. What is the temperature of water leaving the tower?
Inlet: Air, 72 kPa, 291.15K, 230 meters/second Outlet: Air, 98 kPa, 0 meters/second What is the temperature at the outlet? Cp=3.5(8.3145). No heat exchange.
In a flow heat
What is the engine bore (in mm) required for good volumetric efficiency for an engine with two inlet and two exhaust valves, stroke of 90 mm, inlet air temperature of 332 K, exhaust temperature of 900 K, engine speed of 8200 rpm and exhaust valve diameter Assume specific heat ratio =1.3, R = 287 J/kg.K, and an average inlet flow coefficient 0.4 and an average exhaust flow coefficient 0.5. mm (each). Select one: O a. 96.57 O b. 70.23 O c. 105.2 O d. 91.05 O e. 82.71
Performing a home energy audit starts with a visualinspection of a home and its energy systems which include: ______, ________, _______, and _______.
1) A plot of pump net head is shown below. Two curves are drawn: blue color curve and red color curve. Which one is called pump performance curve? Will the location of pump performance curve change if the velocity of the fluid at pump outlet changes? a) red curve; No, the location will not change b) blue curve; yes, the location will change c) red curve; yes, the location will change d) blue curve; No, the location will not change 2) In a turbine system, states A and B are homologous. If the net head ratio HA/HB =16 , volume flow rate ratio VA˙/VB˙=9. What is the diameter ratio DA/DB ? a) 3/2 b) 6 c) 12 d) 2/3
identifuy the limitations that exist within different types of water turbine
29 - A pump increases the pressure of water at a flow rate of 160 L/minute from 100 kPa to 900 kPa. If the shaft power supplied to the pump is 3 kW, what is the pump power? a) 2,128 kJ B) 1,710 kJ NS) 1,660 kJ D) 1,532 kJ TO) 2,082 kJ
PELASE ANSWER IT in 15 mins show sln step by step. THERMODYNAMICS
HANDWRITTEN AND FINAL ANSWER MUST BE IN ENGLISH UNITS. Show solution. An experimental gas turbine engine is under development to increase its mechanical efficiency. It has a turbine efficiency of 95% and compressor efficiency of 85%. The following parameters are provided: P1 = 550 kPa, T1 = 25 deg C, rp = 5.5, T3 = 1450 deg C, Wnet = 5500 kW. Compute for the (a) flow rate and (b) mean effective pressure. Consider Ethane as your working fluid.
Methanol (SG=0.792) is contained in a large tank under a pressure of 350000 Pa absolute. When a valve on the bottom of the tank is opened, the methanol drains freely though a 0.02 m ID tube whose outlet is 7.00 m below the surface of the methanol. The pressure at the outlet of the discharge pipe is 101325 Pa. Some useful constants and conversions: g = 9.8 m/s2 , Pref = 1000 kg/m3 . a. Draw the system. Label points I and 2 (where you will define A= 2-1) and label the variables with values b Write the general form of the energy balance. Cancel out negligible terms, and state the keyword/assumption to justify. Simplify to the resultant energy balance. c.) Assume the diameter of the tank is very big compared to the drain tube velocity, which make the velocity of liquid in the tank equal to zero. Estimate the methanol discharge velocity in the drain tube in m/s. *hint: divide your EB by m to eliminate m and V. Recall, n = pV = pvA and = v/m=1/p