8. Our rule-of-thumb for presenting final results is to round to three significant digitsor four if the first digit is a one. By this rule, write the result for(а) о %3DMc, where M = 1835 lbf in and I/c = 0.875 in³.where F = 324 lbf, l = 28.8 in, E = 30 Mpsi and I = 0.1544 in*.where T = 8543 lbf in, l = 10.00 in, G = 11.3 Mpsi, and J = d(Ъ) у3EI(c) 0with d = 0.988 inTI16T(d) т %38, where T = 30.5 N m and d = 12.7 mm.

Calculated the results of bending stress , deflection , angles of twist ,shear stress.

8. Our rule-of-thumb for presenting final results is to round to three significant digits or four if the first digit is a one. By this rule, write the result for (а) о %3D Me, where M = 1835 lbf in and I/c= 0.875 in³. where F = 324 lbf, l = 28.8 in, E = 30 Mpsi and I = 0.1544 in*. where T = 8543 lbf in, l = 10.00 in, G = 11.3 Mpsi, and J = d (Ъ) у 3EI (c) 0 with d = 0.988 in TI (d) т — 16, where T = 30.5 N m and d = 12.7 mm.

8. Our rule-of-thumb for presenting final results is to round to three significant digits or four if the first digit is a one. By this rule, write the result for (а) о %3D Me, where M = 1835 lbf in and I/c= 0.875 in³. where F = 324 lbf, l = 28.8 in, E = 30 Mpsi and I = 0.1544 in*. where T = 8543 lbf in, l = 10.00 in, G = 11.3 Mpsi, and J = d (Ъ) у 3EI (c) 0 with d = 0.988 in TI (d) т — 16, where T = 30.5 N m and d = 12.7 mm.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A machine that fills cereal boxes is supposed to be calibrated so that the mean fill weight is 12 oz. Let μ denote the true mean fill weight. Assume that in a test of the hypotheses H 0:μ = 12 versus H 1:μ ≠12, the P -value is 0.30.Should H0 be rejected on the basis of this test? Explain.
10. A steam drum contains steam having an 86% quality. Assuming that the density of Liquid part is 989kg/m³ and that of the vapor part is 1.23kg/m³, Estimate the specific volume of the steam. (Note: 86% quality indicates the mass in vapor state) Derive with the formula below, show the cancellation, explain the step by step and DRAW a free body diagram/figure. refer with this: PE1 + KE1 + U1 + WF1 + Q1 + W1 = PE2 + KE2 + U2 + WF2 + Q2 + W2 + E losses.
The force-deflection relation of a steel helical spring used in an engine is found experimentally as F( x) = 200 x + 50 x2 + 10 x3, where the force (F) and deflection (x) are measured in pounds and inches, respectively. If the spring undergoes a steady deflection of 0.5 in. during the operation of the engine, determine the equivalent linear spring constant of the spring at its steady deflection.
During a 60–minute trial of a single cylinder four-stroke oil engine, the following observations were made. Engine dimension = 0.3 m bore X 0.45 m stroke, Fuel consumption 11.4 kg, Calorific value of fuel = 40 MJ/kg, IMEP = 6 bar, Net load on brakes = 1652 N , Speed = 300 rpm, Brake drum diameter = 1.8 m, Brake rope diameter = 20 mm, Quantity of jacket cooling water = 600 kg, Temperature rise of cooling water = 55°C, Quantity of air as measured = 250 kg, Exhaust gas temperature = 420°C, Specific heat of exhaust gas = 1.0 kJ/kg K, Ambient temperature = 20°C. Draw up an energy balance sheet of the engine and calculate for: Qw = energy loss due to cooling water, in kJQe = energy loss due to exhaust gas, in kJQu = unaccounted energy loss due to convection, radiation, etc. , in kJ
Specify the conditions of H,0 for the following conditions. Justify your answer and show Ts diagram for each item a) P = 900 kPa and v = 1.0245 lit/kg b) 76°C and U = 3542.2 kJ/kg c) T= 100°C and p = 2.5 MPa %3D d) P = 1.2 MPa and SH – 234.6°C
7. What is the statistical measure of entropy? A. disorder of a system B. heat of a system C. order of a system D. cooling of a system8. The second law of thermodynamics relates to ___________________________. A. enthalpy B. entropy C. free energy D. heat 9. Standard entropy is measure at ____________________________. A. 25oC and 1.o atm B. 25oC and 2.0 atm C. 100oC and 1 atm D. 25oC and 2.5 atm Please answer these 7, 8 and 9 subunits thank you!
Krypton in a closed system is compressed adiabatically from 74 K and 1 bar to a final pressure of 24 bar. What is the final temperature in K? Assume krypton is an ideal gas. From Appendix B in the text, we can assume the heat capacity of krypton is independent of temperature and CP=2.5R , where R is the molar gas constant R=8.314 J/(mol K). For an ideal gas, recall CV=CP−R=1.5R. Report your answer in units of K using three decimal places.
Krypton in a closed system is compressed adiabatically from 94 K and 1 bar to a final pressure of 24 bar. Compute the required work. Assume krypton is an ideal gas. From Appendix B in the text, we can assume the heat capacity of krypton is independent of temperature and CP=2.5R , where R is the molar gas constant R=8.314 J/(mol K). For an ideal gas, recall CV=CP−R=1.5R. Report your answer in units of kJ/mol using three decimal places.
In an environment, the temperature suddenly increased from 100°C to 200°C. In order for a thermoelement in the environment to show 199.4°C in 8 seconds, how many seconds must the time constant of the thermoelement be? a. 1.919 b. 1.609 c. 1.630 d. 1.563 e. 1.955
Use the following conversions where necessary:1hp = 745.7W; ρwater = 1000 kg/m3; ρmercury = 13600 kg/m3; 1 atm = 101.325 kPa; Cp (water) = 4.18 kJ/kg °C; g = 9.81m/s2; For properties of air, use R = 0.287 kJ/kg K; Cv (air) = 0.718 kJ/kg K; Cp (air) =1.005 kJ/kg K The following table lists temperatures and specific volumes of water vapor at two pressures: Data encountered in solving problems often do not fall exactly on the grid of values provided by property tables, and linear interpolation between adjacent table entries becomes necessary. Using the data provided here, estimate i. the specific volume at T = 240 °C, p = 1.25 MPa, in m3/kg ii. the temperature at p = 1.5 MPa, v = 0.1555 m3/kg, in °C iii. the specific volume at T = 220 °C, p = 1.4 MPa, in m3/kg
Steam at 100 bar, 320°C expands isothermally in a cylinder behind a piston to a pressure of 10 bar. Solve for the work done per kilogram of steam.
A 227 kg bear* is 15 ft up a tree when it falls onto a trampoline deforming it 3 ft (where it touches the ground). Neglecting friction and mass of the trampoline (and assuming the trampoline is a simple spring), what is the spring constant of the trampoline? 1 m = 3.3 ft * the bear was OK a. 24,470.60 N/m b. 2,441.93 N/m c. 741.53 N/m d. 7,415.33 N/m