9-5. The 2014-T6 aluminum rod has a dismeter of 30 mm and supports the koad shown. Determine the displacement of end A with respect to end E. Neglect the sie of the couplings 4KN 2KN -2 m-
Q: A force of 10 kN is applied to the hook. If the CB cable is made of steel (E= 200 GPa) determine the…
A: According to the details provided in the question, we need to calculate the Displacement of BC.
Q: 0.6 m 03 m -1m-1.50 m- 0.75 m
A: Consider it as simply supported beam and determine reactions at A and B
Q: The shaft ABCDE is under equilibrium. Determine the internal torque in section (3). 36.00 N-m 28.00…
A:
Q: 5) Use the method of sections to find the true magnitude and direction in bar DB of the truss. Hint(…
A: As the members DB and DE are joint only with no external force or a third member... So, the members…
Q: PS-1. Determine the internal torque at cach section and show the shear strew on differential volume…
A:
Q: 10-18. The motor delivers a torque of 5ON-m to the shaft AB. This torque is transmitted to shaft CD…
A: Given data: *The torque delivered by the motor is T=50 Nm. *The torque on the shaft CD is T’. *The…
Q: 13-35. The block is subjected to the eccentric load shown. Determine the normal stres developed at…
A: Given Data: The dimension of the cross-section of the block is: l X b = 150 mm X 100 mm The force…
Q: 2m 9. The rod AB rests on a heriaantal surface at A and against slipping suface atB if My z0-25 at A…
A: If a force F is inclined at an angle θ with the horizontal, then the component of force along the…
Q: The A-36 steel bolt is tightened within a hole so that the reactive torque on the shank AB can be…
A: On applying torque equilibrium at the bolt,
Q: 10-45. The rotating flywheel-and-shaft, when brought to a sudden stop at D, begins to ascillate…
A: Given data: Arc length, s = 6mm Radius of the wheel, R = 75mm Shaft inner dia, d = 24 mm Shaft outer…
Q: 10-78. The tapered shaft is confined by the fixed supports at A and B. If a torque T is applied at…
A:
Q: 9-13. A spring-supported pipe hanger consists of tuo speings which are originally unstretched and…
A: Calculating displacement on the spring, Calculating the displacement of the steel rod AB and CD,…
Q: B 50 mm 0.75 m 100 mm- 500 N-m C 1.5 m
A:
Q: 7-22. Determine the resultant internal loadings acting on the cross section at point E. The load D…
A: Draw the free body diagram for a better understanding of the given problem.
Q: F4-3. The 30-mm-diameter A-36 steel rod is subjected to the loacing shown. Determine the…
A: Given data The 30-mm-diameter A-36 steel rod is subjected to the loading shown To determine the…
Q: *10-60. The A36 solid steel shaft is 3 m long and has a diameter of 50 mm. It is required to…
A:
Q: 9-22. The post is made of Douglas fir and has a diameter of 100 mm. If it is subjected to the load…
A: Given data To determine the force F needed at the bottom end needed for equilibrium.
Q: The shaft ABCDE is under equilibrium. Determine the internal torque in section (3). 22.00 N-m 31.00…
A: Let us discuss about internal torque under equilibrium for section 3.
Q: 5-86. Operation of exhaust and intake valves in an automobile engine consists of the cam C, push rod…
A: Given Data The copression of the spring is: 20 mm=0.02 m The stiffness is: 300 N/m To Determine…
Q: 5-49. The rigid metal strip of negligible weight is used as part of an clectromagnetic switch. If…
A: Free body diagram: Here,lA and lB are the deflections at A and B respectively.Writing the…
Q: When the 100-lb block is at h = 3 ft above the cylindrical post and spring assembly, it has a speed…
A: Above loading is Type of impact loading. In impact loading , stress generated in the body is higher…
Q: 03. The automobile has a mass of 2 Mg and center of mass at G. Determine the towing force F required…
A: Draw a free body diagram for the problem. Here, NA and FA indicate the normal reaction at A and the…
Q: 10-49. The turbine develops 150 kW of power, which is transmitted to the gears such that C receives…
A: Write the formula for power developed in terms of the torque transmitted by the shaft. P=2πωT60…
Q: •5-13. If the applied torque on shaft CD is T' = 75 N m, determine the absolute maximum shear stress…
A: When an object is subjected to a twisting moment, the moment tends to twist the object at an angle…
Q: 16-70. The beam has a constant E,h and is suppolted by the fixed wall at Band the fod AC. If the Fod…
A:
Q: 16-31. The shaft is supported at A by a journal bearing and at C by a thrust bearing. Determine the…
A: Here the shaft supported at A by journal bearing which means only vertical reaction exists here at…
Q: The motor produces 30kW to the A-36 steel solid shaft at a frequency of 20HZ. The shaft is 70mm in…
A: Given data as per question diameter of shaft (d)=70 mmω=20 Hz=20×6.28=125.6 radsPower developed by…
Q: *10-20. The shaft has an cuter diameter of 100 mm and an inner diameter of 80 mm. If it is subjected…
A: Given Data: The outer diameter of the shaft is D = 100 mm. The inner diameter of the shaft is d =…
Q: *9-28. The linkage is made of two pin-connected A-36 steel members, each having a cross-sectional…
A: Given data: The material of the member of the linkage is A36 steel. The cross section of the member…
Q: 4-1. The A992 steel rod is subjected to the loading shown. If the cross-sectional area of the rod is…
A:
Q: 10-21. The shaft has an outer diameter of 100 mm and an inner diameter of 80 mm. If it is subjected…
A: Given Data: The outer diameter of the shaft is do= 100 mm. The inner diameter of the shaft is di =…
Q: If P = 4.1 kN , determine the horizontal displacement of end F of rod EF.
A:
Q: R7-6. The bearing pad consists of a 150 mm by 150 mm block of aluminum that supports a compressive…
A: Given data P=6 kNA=150 ×150 mm2=22500 mm2
Q: 9-27. The linkage is made of two pin-connected A-36 steel members, each having a cross-sectional…
A: Given Data Cross-sectional area =1000mm2=1000×10-6m=10-3m Vertical force,P=250KN Young modulus of…
Q: Sined the weight of the pully te kp the system în equilibrium. 65N 60
A:
Q: 10-43. The shaft is made of A992 steel. It has a diameter of 25 mm and is supported by bearings at A…
A: Given data: The diameter of the shaft is d = 25 mm. The applied torque at C is TC = 90 N·m. The…
Q: 20 - 60 30 180 For a gripping force of P-150 N at the handles of a small bolt cutter as shown,…
A: Draw the FBD of the diagram as shown below,
Q: The shaft has an outer diameter of 100 mm and an inner diameter of 80 mm. If it is subjected to the…
A:
Q: •5-13. If the applied torque on shaft CD is T' = 75 N•m, determine the absolute maximum shear stress…
A: According to given conditionWe haveRadius of Gear F=rf=125mmRadius of Gear E=re=50mmNow max. shear…
Q: the l612-16 unform plate ABCD can rotate about frely u tupported by the cables DE and CE. Rotermine…
A: A moment is a movement of the body when a body is rotating on an axis. The moment is also known as…
Q: 5-23. If the roller at A and the pin at B can support a load up to 4 kN and 8 kN, respectively,…
A:
Q: Determice x(6) M- S B - IN- S6 K - I Nm f, t) M 4 = Im * (E). L2 = am fit) • &N. 8/19 20.1t cos ¤…
A: Given : To find : x(t)
Q: FI0-11. The hollow 6061-T6 aluminum shaft has an outer and inner radius of , = 40 mm andg = 30 mm,…
A: Given data as per the question Outer radius =40 mm Inner radius =30 mm Torsional stiffness =90…
Q: The two shafts are made of A-36 steel. Each has a diameter of 25 mm and they are connected using the…
A:
Q: 300 kN/m- 500 kN/m-, - 30 m VA = 5 m/s A Prob. 14-29
A:
Q: Q 25. Where will the centre of percussion of uniform length suspended rod of length L' le when…
A: To find: The center of percussion of uniform suspended rod of length L lie when measured from the…
Q: Q.3 The solid steel shaf has a diameter of 20 mm. If it is subjected to the two torques, determinet…
A:
Q: The shaft ABCDE is under equilibrium. Determine the internal torque in section (3). 39.00 N-m 37.00…
A: take momentum about x axis is zero answer in second step
Q: Draw the free-body diagram for the following problem. The crane and boom shown.
A: for the given figure we need to determine its free body diagram
Q: 10-61. The motor produces a torque of T = 20 N-m an gear A. If gear Cis suddenly kocked so it does…
A: The torque acting on gear A, T = 20 N.m The inner diameter of the shaft, d = 30 mm = 0.03 m The…
Trending now
This is a popular solution!
Step by step
Solved in 3 steps with 3 images
- A force of 10 kN is applied to the hook. If the CB cable is made of steel (E= 200 GPa) and has a diameter of 8.5 mm, determine its displacement. Consider the distance CB shown below as the initial length.The truss is made of three A-36 steel members, each having a cross-sectional area of 400 mm2. Determine the horizontal displacement of the roller at C when P = 8 kN.the solid steel sheft DF has a diameter of 25 mm and is supported by smooth bearings at D and E. It is coupled to a motor at F. which delivers 12kw of bower to the shift while turning at 50 rev/s if gears A ,B and C remove 3kw,4kw,5kw respectively . determine the maximum shear stress developed in the shift within Regions CF and BC. the shaft is free to turn in its support bearings D and F
- The two shafts are made of A-36 steel. Each has a diameter of 25 mm and they are connected using the gears fixed to their ends. Their other ends are attached to fixed supports at A and B. They are also supported by journalbearings at C and D, which allow free rotation of the shafts along their axes. If a torque of 500 N # m is applied to the gear at E, determine the rotation of this gear.The rigid bar is supported by the two short white spruce wooden posts and a spring. If each of the posts has an unloaded length of 1 m and a cross-sectional area of 600 mm2, and the spring has a stiffness of k = 2 MN >m and an unstretched length of 1.02 m, determine the vertical displacement of A and B after the load is applied to the bar.The cylinder has a mass of 30 kg and is mounted on an axle that is supported by bearings at A and B. If the axle is turning at 40 rad/s (direction see figure) determine the vertical components of force acting at the bearings at this instant
- The two shafts are made of A-36 steel. Each has a diameter of 25 mm and they are connected using the gears fixed to their ends. Their other ends are attached to fixed supports at A and B. They are also supported by journal bearings at C and D, which allow free rotation of the shafts along their axes. If a torque of 500 N.m is applied to the gear at E as shown, determine the reactions at A and B.5-22Determine the relationships [k], {u} and {f} for the spring arrangement as shown, and determine the displacement for each nodal.
- The assembly consists of three titanium (Ti-6A1-4V) rods and a rigid bar AC. The image shows the cross-sectional area of the assembly .If a force P= 66 kNkN is applied to the ring F, what isthe angle of tilt of bar AC measured counterclockwise from the negative y axis.The post is made of Douglas fir and has a diameter of 100 mm. If it is subjected to the load of 20 kN and the soil provides a frictional resistance that is distributed along its length and varies linearly from w = 4 kN>m at y = 0 to w = 12 kN>m at y = 2 m, determine the force F at its bottom needed for equilibrium. Also, what is the displacement of the top of the post A with respect to its bottom B? Neglect the weight of the post.If the hollow shaft is subjected to a uniform distributed torque of 20 kNm/m, determine thesupport reactions at A and C. The shaft is made of aluminum alloy with G = 28 GPa and is fixed at Aand C.