A 1 lbm/s fluid enters a machine at 170 m/s, 800 kPa, and with a specific volume of 0.3 m3/kg. The radiation heat loss is 25 kJ/kg. The internal energy decreases 485 kJ/kg. If the fluid leaves at 330 m/s, 138 kPa, and 0.95 m³/kg, determine the work done by the fluid in kW. 528.9 O 239.9 O 329.86 O 825.9

A 1 lbm/s fluid enters a machine at 170 m/s, 800 kPa, and with a specific volume of 0.3 m3/kg. The radiation heat loss is 25 kJ/kg. The internal energy decreases 485 kJ/kg. If the fluid leaves at 330 m/s, 138 kPa, and 0.95 m³/kg, determine the work done by the fluid in kW. 528.9 O 239.9 O 329.86 O 825.9

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Air enters a cooling coil at the rate of 5000 cfm (2.4 m3/s) at 80 F (27 C). db, 68 F (20 C) wb and sea-level pressure. The air leaves the coil at 55 F (13 C) db, 54 F (12 C) wb. (a) Determine the SHF and the apparatus dew point. (b) Compute the total and sensible heat transfer rates from the air.
The specific heat of 1.1 kg eggs at 13 ° C is 3.32 kJ / kg ° C. If the egg is thrown into boiling water at 102 ° C, what will be the maximum heat transfer to the egg? A) 295,5 kJ B) 325 kJ C) 89 kJ D) 97,9 kJ E) 1322 kJ
A device expends 152.03 kJ of energy while pressurizing 6.953 kg of water initially at 11.81°C. The efficiency of the heating device is 66.52%. Inefficiencies are represented by a heat loss from the device casing. Determine the final temeprature in °C.
Heat transfer principles of convection
1- Water vapor at a flow rate of 20000 kg / hour enters a steam boiler with a specific volume of 150 kPa 0.001053 m3 / kg. With the energy it takes from the fuel in the combustion chamber of the boiler, it rises at 150˚C at 1200 kPa. If the boiler has poor insulation and loses 100 kW of heat to the environment, calculate the time required to increase 1 ton of water to 150 ° C in the boiler. A. 347 sB. 3752 sC. 1651 sD. 648 sE. 2494 s
Steam enters a turbine with a pressure = 4,786 kPa and h 3,204.99 kJ/kg, with a flow of 7.383 kg/s. Steam leaves with h = 2,344 kJ/kg and pressure of 23 kPa. The radiative heat loss is equal to 27.18 kJ/kg of steam. Determine the work steady flow in kW. Answer must be in 3 decimals.
Pls. Answer thank you! An air conditioned theater is to be maintained at 80 °F dry bulb temperature and 50% RH(h = 31.35 Btu/lb). The calculated total sensible heat load in the theater is 500,000 Btu/hr, and the latent heat load is 150,000 Btu/hr. The air mixture at 84 °F db and 72 °F wb temperature(h = 35.82 Btu/lb) is cooled to 63 °F dry bulb and 59 °F wet bulb temperature (h = 25.78 Btu/lb)by chilled water cooling coils and delivered as supply air to the theater. Calculate the tons of refrigeration required.
12. A classroom type room with 45students taking an exam in thermodynamics is expected to release a body heat of about 8kJ/hr per person. In order to compensate this heat dissipation, an air- conditioning unit is to be installed. If specific heat capacity and density of air is 1.0062kJ/kg-K and 1.21kg/m3, determine the volume of air flow required in examination room if the air is to be cooled down from 29°C to 20°C. a. 8.5177Li/s b. 9.1262Li/s c. 9.2022Li/s d. 9.0501Li/s
A rotary dryer fired with bunker oil having HHV = 10, 000 kcal/kg is to produce 20 MT/hr of dried sand with 0.5% moisture from wet feed containing 7% moisture. Specific heat of sand is 0.21 BTU/lb-°F. Temperature of wet sand is 30 °C and temperature of dried product is 115 °C. If the heater requirement, Qh = 2, 500 kW, calculate the density of bunker oil in kg per m3 ifspecific gravity of bunker oil is 0.8 and dryer efficiency is 70%.
The inside design conditions for a conditioned space are 20.1 degree C dry-bulb and15.2 degree C wet-bulb. The air temperature increases 10.6 degree C as it passes through theconditioned space. The apparatus dew point is 11.9 degree C. The heat transfer rate is 456kW. What is most nearly the volumetric flow rate of the air passing through thespace?A. 12 m3/s B. 19 m3/s C. 22 m3/s D. 36 m3/s
Steam enters a turbine with a pressure of 700 psia, h = 1403 Btu/lbm, u=1272 Btu/lbm, and flow of 14 lbm/sec. Steam leaves with h = 960 Btu/lbm, u = 904 Btu/lbm and 10 psia. There is radiative heat loss at the rate of 135 Btu/sec. Determine (a) the power produced in hp, (b) the exit velocity of steam flowing in an exit area of 50 ft2.
1)A)What is Conduction in Heat Transfer ? B)Does the Conduction affect the lifetime of the turbine? C)How does the Conduction affect the lifetime of the turbine?