A 10 kg vibrating system is placed on a table which is bolted to the floor. Due to operation of rotating equipment, the floor has a vibration amplitude of 0.2 mm at a frequency of 30 Hz. If the table is modeled as a spring of stiffness 1.3x106 N/m with a damping ratio of 0.04. Find the steady state acceleration amplitude of the vibrating system.

A 10 kg vibrating system is placed on a table which is bolted to the floor. Due to operation of rotating equipment, the floor has a vibration amplitude of 0.2 mm at a frequency of 30 Hz. If the table is modeled as a spring of stiffness 1.3x106 N/m with a damping ratio of 0.04. Find the steady state acceleration amplitude of the vibrating system.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A heavy machine, weighing 3000 N, is supported on a resilient foundation. The static deflection of the foundation due to the weight of the machine is found to be 7.5 cm. It is observed that the machine vibrates with an amplitude of 1 cm when the base of the foundation is subjected to harmonic oscillation at the undamped natural frequency of the system with an amplitude of 0.25 cm. Find a. the damping constant of the foundation, b. the dynamic force amplitude on the base, and c. the amplitude of the displacement of the machine relative to the base.
A machine, weighing 3000 N, is supported on a resilient foundation. The static deflection ofthe foundation due to the weight is 7.5 cm. It is observed that the machine vibrates with anamplitude of 1 cm when the base of the foundation is subject to harmonic oscillation at theundamped natural frequency of the system with an amplitude of 0.25 cm. Find(a) the damping constant of the foundation;(b) the maximum force transmitted to the base;(c) the amplitude of the displacement of the machine relative to the base.
A radio set of 20 kg mass must be isolated from a machine vibrating with an amplitude of 0.05 mm at 500 cpm. The set is mounted on four isolators, each having a spring scale of 31400 N/m and damping factor of 392 N-sec/m. What is the amplitude of vibration of the radio?
A machine weighing 10kN is supported on its foundation by spring mounting. the piston of the machine moves up and down with a harmonic frequency 10 cycles per second. The piston has a weight of 500N and total stroke of 500mm. Determine the maximum force transmitted to the foundation if the total spring stiffness k = 5N/mm. Ignore damping.
An automobile whose weight is 150 N and it is mounted on 4 identical springs due to its weight it sags by 250 mm . each shock absorber has damping coefficient of 0.4 N for a velocity oof 30 mm/sec. The car is placed on a platform which moves vertically at resonance speed having an amplitude of 10mm. Find the amplitude of the car
An air compressor, weighing 100 kg, is mounted on an elastic foundation. I knowhas observed that when a harmonic force of 150 N amplitude is applied to the compressor, theMaximum steady state displacement is 6.2mm and occurs at a frequency of 320rpm.Determine: a) the equivalent stiffness, b) the damping constant "C" of the foundation andc) The force transmitted to the foundation. d) Illustrate using graphics
The measurements on a mechanical vibrating system show that it has a mass of 8 kg and that the springs can be combined to give an equivalent spring of stiffness 5.4 N/mm. If the vibrating system have a dashpot attached which exerts a force of 40 N when the mass has a velocity of 1 m/s, find : 1. critical damping coefficient, 2. damping factor, 3. logarithmic decrement, and 4. ratio of two consecutive amplitudes.
In a single degree of damped vibration system a suspended mass of 8kg makes 30 oscillations in 18 seconds. The amplitude decreases in 18 seconds. The amplitude decreases to 0.25 of the initial value after 5 oscillations. Determine (i) the spring stiffness (ii) logarithmic decrement (iii) damping factor (iv) Damping coefficient
A spring-mass system with m = 0.5 kg and k = 10,000 N/m with negligible damping, is used as a vibration pickup. When mounted on a structure vibrating with an amplitude of 4 mm, the total displacement of the mass of the pickup is observed to be 12 mm. Find the frequency of the vibrating structure.
A horizontal spring mass system with Coulomb damping has a mass of 5 kg attached to a spring of stiffness 980 N/m. If the coefficient of friction is 0.025,calculate the frequency of free vibrations, the number of cycles corresponding to 50% reduction in amplitude if the initial amplitude is 5cm and the time taken to achieve this 50% reduction.
A 1-kg block attached to an Ideal massless spring and fixed on the other end on a horizontal frictionless surface. This block oscillates with an amplitude of 0.3 m and reaches a maximum speed of 5 m/s. What is the spring constant in N/m?
A precision grinding machine is supported on an isolator that has a stiffness of 3 MN/m and a viscous damping constant of 3 kN-s/m. The floor on which the machine is mounted is subjected to a harmonic disturbance due to the operation of an unbalanced engine in the vicinity of the grinding machine. Find the maximum acceptable displacement amplitude of the floor if the resulting amplitude of vibration of the grinding wheel is to be restricted to 4*10^(-6)m. Assume that the grinding machine and the wheel are a rigid body of weight 6000 N. Use omega=100*Pi (previous answer to the same problem just different numbers)