A 150 lb cylindrical tank is at rest as shown as shown in the figure. Determine the force P required to move the tank up the higher level surface. www \-St (A)33.3 lb (C) 66.7 lb www www (B)50.0 lb (D) 86.6 lb

A 150 lb cylindrical tank is at rest as shown as shown in the figure. Determine the force P required to move the tank up the higher level surface. www \-St (A)33.3 lb (C) 66.7 lb www www (B)50.0 lb (D) 86.6 lb

Name: A 150-lb cylindrical tank is at rest as shown. Determine force P in lb
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A 150-lb cylindrical tank is at rest as shown. Determine force P in lb required to move the tank up to the higher-level surface. A 150 lb cylindrical tank is at rest as shown as shown inthe figure. Determine the force P required to move thetank up th

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

Repeat Prob. 4.152 assuming that the 400-kN force is applied at O instead of L.
What are the reaction forces on the latch an djoint in the gate below? And in case thefloodgate is reversed (concave)? *The gate is a cylinder room with length L = 5 m
Find a) the total force on gate AB in KN and b) the position of the center of pressure in m with respect to the bottom of the pond. Assume that the gate is 8 feet wide, that 1ft = 0.3048m, and that 1PSI = 6897.1 Pa
The 5 m high and 6 m wide rectangular cover is hinged from point A on its upper edge and is prevented from opening with a fixed wedge at point B. Determine the hydrostatic force and center of pressure exerted on the cover by the 8 m high water. (ρ(water)=1000 kg/m^3 , g= 9.81 m/s^2)
An open rectangular tank 1 m wide and 2 m long contains gasoline to a depth of 1 m. If the height of the tank sides is 1.5 m, and if it slides down a frictionless plane that is inclined at 300 with the horizontal, determine the angle the free surface makes with the horizontal. Ans. The free surface is the same as the angle.
For the tank of water shown below, the radius of the circular surface is R=1.0 m, h=1.0m, and the length of the tank is w=2.0 m. Determine (1) the correct expression of the area magnitude whose volume weight is equivalent to the vertical force exerted on the whole curved surfaces_________ A. B. C. D.
The uniform 5-m-long round wooden rod in Fig. istied to the bottom by a string. Determine ( a ) the tension inthe string and ( b ) the specifi c gravity of the wood. Is it possiblefor the given information to determine the inclinationangle θ ? Explain.
The 100cm radius cylinder weighs 3.1 KN and rest on the bottom of a container which is 1.5 meter long. Oil and water are poured into the left and right portion of the container to the depth of 0.8m and 1.4m respectively. Find the magnitude of the horizontal and vertical components of the force which will keep the cylinder touching the container at B.
A man is standing on a board on a frozen lake where there is no friction between the board and the ice surface. Tha man's mass is 2 m and the boaf's mass is 4 m. The board has length L. He walks from 1/5 Lfrom the left end of the board to 1/5 L from the right end of the board. How far and in which direction does the board move during this process?
Determine the mass of weight necessary to increase the pressure of the liquid trapped inside a piston-cylinder device to 127 kPa.Assume the piston to be weightless with an area of 0.10 m2.The outside pressure to be 100 kPa and g=9.81 m/s2.
Pressure cooker containing air at STP has been heated and after sometimes, it was observed that the temperature inside the pressure cooker reached 250C. Assuming the volume to remain constant, determine the force (kN) necessary to compensate the safe opening of the pressure cooker lid if the diameter of the lid is 30cm.
Balloons are often filled with helium gas because it weighs only about one-seventh of what air weighs under identical conditions. The buoyancy force, which can be expressed as Fb = ? airgVballoon, will push the balloon upward. If the balloon has a diameter of 12 m and carries two people, 70 kg each, determine the acceleration of the balloon when it is first released. Assume the density of air is ? =1.16kg/m3, and neglect the weight of the ropes and the cage