A 3-meter clay layer (e = 0.86, Gs = 2.69, Cc = 0.304) is overlain with 2-meter-thick sand layer (e = 0.77, G = 2.83). The water table is at the interface of the sand and clay layer. If a 2-meter-thick land fill (γ = 17.53 kN/m3) is placed over the existing ground surface, compute the consolidation settlement (in mm.) of the clay layer. Hint: Use the land fill's resulting pressure on the ground surface as the stress increase. Round off to two decimal places.

A 3-meter clay layer (e = 0.86, Gs = 2.69, Cc = 0.304) is overlain with 2-meter-thick sand layer (e = 0.77, G = 2.83). The water table is at the interface of the sand and clay layer. If a 2-meter-thick land fill (γ = 17.53 kN/m3) is placed over the existing ground surface, compute the consolidation settlement (in mm.) of the clay layer. Hint: Use the land fill's resulting pressure on the ground surface as the stress increase. Round off to two decimal places.

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter9: Consolidation

Section: Chapter Questions

Problem 9.20CTP

See similar textbooks

Question 6

A 3-meter clay layer (e = 0.86, Gs = 2.69, Cc = 0.304) is overlain with 2-meter-thick sand layer (e = 0.77, G = 2.83). The water table is at the interface of the sand and clay layer. If a 2-meter-thick land fill (γ = 17.53 kN/m3) is placed over the existing ground surface, compute the consolidation settlement (in mm.) of the clay layer. Hint: Use the land fill's resulting pressure on the ground surface as the stress increase. Round off to two decimal places.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Given data

VIEW

Step 2: unit weight of soils

VIEW

Step 3: effective stress at the middle of clay layer

VIEW

Step 4: Increase in stress at the middle of clay layer

VIEW

Step 5: computation of settlement.

VIEW

Step by step

Solved in 5 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

20 A 4-meter clay layer (e = 0.92, Gs = 2.89, Cc = 0.315) is overlain with 4-meter-thick sand layer (e = 0.86, G = 2.63). The water table is at the interface of the sand and clay layer. If a 3-meter-thick land fill (γ = 17.21 kN/m3) is placed over the existing ground surface, compute the consolidation settlement (in mm.) of the clay layer. Hint: Use the land fill's resulting pressure on the ground surface as the stress increase. Round off to two decimal places.
A 2m clay layer has values of e = 0.92 , Gs = 2.72 and liquid limit of 40%. Above the clay is a 3m thick layer sand with e = 0.50 and Gs = 2.62. The water table is located 1.6 m below the ground surface having a unit weight of 17.3 kN/cu. Meter, determine the following: a. Compression index of clayb. Effective pressure at the midpoint of clayc. Primary settlement for normally consolidated clay.......
For a given consolidated clay: Gs= 2.71; LL= 45; In situ average effective overburden pressure = 120 kPa; In situ void ratio= 0.80 ; Thickness of clay layer = 4m ; average increase of effective stress on clay layer= 40 kPa; Effective pressure at the mid-height of clay layer= 60 kPa; Swell Index (Cs)= 1/5 Cc. Compute the pre-consolidation pressure in kPa. a. 92.9 b. 49 c. 87.64 d. 100.5
A 2-meter clay layer (e = 0.88, Gs = 2.67, Cc = 0.305) is overlain with 4-meter-thick sand layer (e = 0.82, G = 2.72). The water table is at the interface of the sand and clay layer. If a 2-meter-thick land fill (γ = 17.97 kN/m3) is placed over the existing ground surface, compute the consolidation settlement (in mm.) of the clay layer. Hint: Use the land fill's resulting pressure on the ground surface as the stress increase. Round off to two decimal places. Selected Answer: 60.25
For a given consolidated clay: Gs= 2.71; LL= 45; In situ average effective overburden pressure = 120 kPa; In situ void ratio= 0.80 ; Thickness of clay layer = 4m ; average increase of effective stress on clay layer= 40 kPa; Effective pressure at the mid-height of clay layer= 60 kPa; Swell Index (Cs)= 1/5 Cc. Compute the compression index. a.0.534 b.0.513 c.0.315 d.0.145 With Free Body Diagram
A 3.75 m thick clay layer (drained on one side) is normally consolidated. When the pressure increase from 50 KN/m2 to 150 KN/m2 , the void ratio decreases from 0.9 to 0.75.For the clay Cv=0.24 cm2/sec.a. Interpret the time in days for the clay layer to reach 50% consolidation. b. Interpret the settlement at that time i.e, at 50% consolidation.
PROBLEM 50: Compute the compression index of undisturbed clay having a plastic limit of 32% and a plasticity index of 8%
For a given consolidated clay: Gs= 2.71; LL= 45; In situ average effective overburden pressure = 120 kPa; In situ void ratio= 0.80 ; Thickness of clay layer = 4m ; average increase of effective stress on clay layer= 40 kPa; Effective pressure at the mid-height of clay layer= 60 kPa; Swell Index (Cs)= 1/5 Cc. Compute the primary consolidation settlement in mm. a.87.64 b.49 c.92.9 d.100.5
The soil profile at a site consists of a 3-m thick sand layer (moist unit weight = 16.5 kN/m^3, saturated unit weight = 18.5 kN/m^3) underlain by a 6-m thick clay layer (w = 27%, Gs = 2.70, mv = 0.31 MPa^-1, Cv = 2.6 m^3/year), which is underlain by a gravel layer as shown in the figure. A 3 m compacted fill with a unit weight of 20 kN/m^3 is required to be placed at ground level.a) What would be the final consolidation settlement, in mm rounded to the first decimal place?b) How long will it take for 50 mm consolidation settlement, in months rounded to the first decimal place?c) What would be the consolidation settlement in one year, in mm rounded to nearest whole number?
Problem # 4. A 2m. clay layer has values of e = 0.92, Gs = 2.72 and liquid limit of 40%. Above the clay is a 3m thick layer of sand with e =0.50 and Gs = 2.62. The water table is located 1.6 m below the ground. If a 3m thick backfill is placed on the ground surface having a unit weight of 17.3 kN/m^3, determine the following: a. Compression index of clay.b. Effective pressure at the midpoint of clay.c. Primary settlement for normally consolidated clay.
For a given over consolidated clay: Specific gravity = 2.71 , Liquid limit = 45, In situ average effective over burden pressure = 120 kPa ,In situ void ratio = 0.80, Thickness of clay layer = 4m , ∆P = 40 kPa, Effective pressure at the mid – height of clay layer = 60 kPa , Swell index (Cs) = 1/5 Cc1.) Compute the compression index. 2.) Compute the pre – consolidation pressure. 3) Compute the primary consolidation settlement.
A clay layer, whose total settlement under a given loading is expectedto be 13cm settles 3 cmat end of 1 months after application of load increment. How many months will be required to reach a settlement of 8cm? How much settlement will occur in 12months? Assume the layer to have double drainages