A 3000 m long triangle channel carries 6.5 m³/s of water. The depth of the flow is 1.45 m. The channel is constructed from rough-formed concrete with a roughness coefficient of n=0.017. What is the difference in elevation between the two ends of the channel? Solution: water 60 /concrete channel 1. Channel geometry: o Side slope m = o Section area A= o Hydraulic radius Rh= 2. Discharge: o Slope So= ο Elevation difference ΔΗ= I m²; m; m. (

A 3000 m long triangle channel carries 6.5 m³/s of water. The depth of the flow is 1.45 m. The channel is constructed from rough-formed concrete with a roughness coefficient of n=0.017. What is the difference in elevation between the two ends of the channel? Solution: water 60 /concrete channel 1. Channel geometry: o Side slope m = o Section area A= o Hydraulic radius Rh= 2. Discharge: o Slope So= ο Elevation difference ΔΗ= I m²; m; m. (

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The channel consists of a smooth cement section (m = 0.109) and overflow regions on each side that contain light brush (m = 1.54). If the bottom of the channel has a slope of 0.0015, determine the steady volumetric flow when the depth is 2.5meters. Show step by step solution using Bazin's formula.
A canal of trapezoidal section has bed width of 8 m and bed slope of 1 in 4000. If the depth of flow is 2.4 m and side slopes of the channel are 1 horizontal to 3 vertical, determine the average flow velocity and the discharge carried by the channel. Also compute the average shear stress at the channel boundary. Take value of Chezy’s Constant = 50
A trapezoidal channel has a bed width of 5 m, a side slope of 2.5:1 (H:V) and a flow depth of 3 m. The velocity = 1.2 m/s and the velocity head = 0.073 m i. Determine the flow area (m²) of this channel. ii. Determine the wetted perimeter (m) of this channel. iii. Determine the hydraulic radius (m) of this channel. iv. Determine the width (m) of flow across the surface of this channel. v. Determine the freeboard (mm) of this channel. vi. Determine the total channel depth (m). vii. Determine the discharge (m³/s) of this channel. viii. Determine the Froude number of the flow. ix. Comment on the state of flow.…
A trapezoidal channel has a bed width of 5 m, a side slope of 2.5:1 (H:V) and a flow depth of 3 m. The velocity = 1.2 m/s and the velocity head = 0.073 m i. Determine the flow area (m²) of this channel. ii. Determine the wetted perimeter (m) of this channel. iii. Determine the hydraulic radius (m) of this channel. iv. Determine the width (m) of flow across the surface of this channel. v. Determine the freeboard (mm) of this channel. vi. Determine the total channel depth (m). vii. Determine the discharge (m³/s) of this channel. viii. Determine the Froude number of the flow. ix. Comment on the state of flow.…
Determine the critical depth for best hydraulic cross-section of a trapezoidal channel that carries a flow of 6.5 m³/ s. Note: For Best Hydraulic Cross-Section; T = 2 z where T – top width and z-side length, and R = y/2.
A circular section channel 3 m in diameter has a depth of 1.0 m and is laid to a gradient of 1:1000 and n = 0.012. A.Compute the rate of flow in cu.m./s (2 decimal places) B. Compute the hydraulic radius of the channel (3 decimal places).
The velocity of a trapezoidal canal with a bottom width of 3.2 m and side slopes of 3H:2V is 2.2 m/s. Calculate the following if the flow depth is 2.18 m and the channel bed slope is 5m per 3 kilometers. a. Flow rate, Q b. Roughness coefficient, n c. Shearing stress at the boundary of the canal, τ
A trapezoidal canal has bottom width of 2m and side slope of 2V:3H is laid on the slope of 2 meters per kilometer and has a roughness coefficient n=0.018. Evaluate the normal depth when the flow of waetr is 8.5m3/s.
A meter diameter reinforced concrete pipe culvert is flowing 3/4 full. It's wetted perimeter "p" is m and its hydraulic radius "R" is m.
Consider a farm irrigation ditch in a loam soil having the following dimensions: bottom width= 0.6 m, total depth, 0.5 m, side slopes= 1.5 horizontal to 1 vertical, and depth of water= 0.4 m. If the bottom of the ditch has a uniform slope of 2 m/km, and if the bottom & sides are kept smooth and free from weeds, what will be the mean velocity(m/s) of flow and discharge in m^3/s? Use n = 0.02. Find the shear stress at the watersurface, at half flow depth, and the canal bottom in N/m2 (or Pa). What is the shear velocity in m/sec?
A trapezoidal channel with these conditions: Left side slope = 3H:2V Right side slope = vertical ... has a bottom width of 4 meters and depth of 6 meters. Determine the hydraulic radius in meters
The Hydraulic diameter of a equilateral triangularchannel is 5 cm, the side length is 10cm. The vertical height (h) is equal to a. 40 cm b. 12 cm c. 30 cm d. 15 cm