A 4 pole dc shunt generator with a shunt field resistance of 100 ohm and an armature resistance of 1 ohm has 378 wave connected conductor in its armature. the flux per pole is 0.02wb, if the load resistance of 10 ohm is connexted across the aemature terminal and the generator driven at 1000rpm, calculate the power obsorbed by load

A 4 pole dc shunt generator with a shunt field resistance of 100 ohm and an armature resistance of 1 ohm has 378 wave connected conductor in its armature. the flux per pole is 0.02wb, if the load resistance of 10 ohm is connexted across the aemature terminal and the generator driven at 1000rpm, calculate the power obsorbed by load

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

A shunt generator has an output of 22 kW at a terminal voltage of 220 V. armature and shunt field resistances are 0.05 ohm and 44 ohms, respectively. If the copper loss is equal to the core, friction and windage losses at this load, the over-all efficiency of this generator is nearest to
A long shunt compound DC generator delivers a load current of 150A at 230V and has armature, series field and shunt field resistances of 0.032, 0.015 and 92Ωrespectively. Calculate (i) induced emf (ii) total power generated and (iii) distribution of this power (iv) voltage regulation
A short shunt compound DC generator supplies a load of 10A at a voltage of 10 volts. If the resistances of Armature, shunt field and series field windings are 0.01 ohm, 1 ohm and 0.00 ohm respectively. c) Write down the factors to improve the generated voltage.
A short shunt compound DC generator supplies a load current of 10A at a voltage of 10 volts. If the resistance of armature, shunt field and series field windings are 0.001 ohm, 1 ohm 0.00 ohm respectively. c) write down the factors to improve the generated voltage.
A long shunt compound dc generator delivers a load current of 69 A at 396 V and has armature, series field and shunt field resistances of 0.096 Ω, 0.014 Ω, and 259 Ω, respectively. Calculate the armature current in ampere.
A short shunt compound DC generator supplies a load current of 10A at a voltage of 10 volts. If the resistance of armature, shunt field and series field windings are 0.001 ohm, 1 ohm 0.00 ohm respectively. a) Draw the the figure. And find the generated voltage.
The armature of a 6-pole separately excited dc generator is triplex wave wound with 534 conductors. This machine delivers power to the load at 200V while being driven at 900rpm. At this load, the armature circuit dissipates 640W. If the flux of this generator is 180-mWb, determine the kW rating of the load served. Assume a total brush drop of 2V.
PUT THE EQUATION Given a progressive 2-layer simplex lap winding for a 4-pole dc generator having 20 slots and 20 commutator segments, determine the following and input it on the text field provided. determine: a.Coil Pitch, Ys b.Commutator Pitch, Yc, Back Pitch, YB d. Front Pitch, YB, No. of Parallel Paths
A short shunt compound DC generator delivers a load current of 30 A at 220 V and has armature, series field and shunt field resistances of 0.05, 0.3 and 200Ω respectively. Calculate the induced emf, the armature current and the voltage regulation. Allow 1 V per brush for contact dro
The 20 KW, Shunt DC Generator ha a four-pole lap winding and generates 216-volts when running at 600-rpm. The armature has 144 slot with 6-conductor per slot, if this armature is rewound, wave connected, find the EMF generated at the same speed and flux per pole.
For a DC generator feeding 100 kW power into 230 V mains, having armature resistance and shunt field resistance equal to 0.08 Ω and 115 Ω respectively. Determine the armature current.
A 4 - pole shunt generator with wave - wound armature has 41 slots , each having 12 conductors . The armature resistance is 0-05 ohm and shunt field resistance is 200 ohm. The flux per pole is 25 mWb . If a load resistance of 10 ohm is connected across the armature terminals , calculate the voltage across the load when generator is driven at 1000 r.p.m