A 405-g sample of lead with specific heat cPb = 128 J/(kg · °C) at 87.0°C and a 220-g sample of silver with specific heat cAg = 230.0 J/(kg · °C) at 38.0°C are added to 0.500 kg of water at 22.0°C where specific heat of water cW = 4190 J/(kg · °C) in an insulated container. Assuming the system is thermally isolated, what is its final equilibrium temperature

A 405-g sample of lead with specific heat cPb = 128 J/(kg · °C) at 87.0°C and a 220-g sample of silver with specific heat cAg = 230.0 J/(kg · °C) at 38.0°C are added to 0.500 kg of water at 22.0°C where specific heat of water cW = 4190 J/(kg · °C) in an insulated container. Assuming the system is thermally isolated, what is its final equilibrium temperature

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter21: Heat And The First Law Of Thermodynamics

Section: Chapter Questions

Problem 21PQ

See similar textbooks

Similar questions

An aluminum rod 0.500 m in length and with a cross-sectional area of 2.50 cm2 is inserted into a thermally insulated vessel containing liquid helium at 4.20 K. The rod is initially at 300 K. (a) If one-half of the rod is inserted into the helium, how many liters of helium boil off by the time the inserted half cools to 4.20 K? Assume the upper half does not yet cool. (b) If the circular surface of the upper end of the rod is maintained at 300 K, what is the approximate boil-off rate of liquid helium in liters per second after the lower half has reached 4.20 K? (Aluminum has thermal conductivity of 3 100 W/m K at 4.20 K; ignore its temperature variation. The density of liquid helium is 125 kg/m3.)
The average coefficient of linear expansion of copper is 17 106 (C)1. The Statue of Liberty is 93 in tall on a summer morning when the temperature is 25C. Assume the copper plates covering the statue are mounted edge to edge without expansion joints and do not buckle or bind on the framework supporting them as the day grows hot. What is the order of magnitude of the statues increase in height? (a) 0.1 mm (b) 1 mm (c) 1 cm (d) 10 cm (e) 1 m
A 100-g piece of copper, initially at 95.0C, is dropped into 200 g of water contained in a 280-g aluminum can; the water and can are initially at 15.0C. What is the final temperature of the system? (Specific heats of copper and aluminum are 0.092 and 0.215 cal/g C, respectively.) (a) 16C (b) 18C (c) 24C (d) 26C (e) none of those answers
If 200 cm^3 of tea at 95°C is poured into a 150-g glass cup initially at 25°C, what will be the common final temperature T of the tea and cup when equilibrium is reached, assuming no heat flows to the surroundings? c(glass)= 840 J/kg·K c(water) = 4186 J/kg·K
Water with a mass of mW = 0.400 kg and temperature of TW = 18.5°C is poured into an insulated bucket containing mI = 0.11 kg of ice at a temperature of TI = -18°C. Assume the specific heats of ice and water are constant at cI = 2.10×103 J/(kg⋅°C) and cW = 4.19×103 J/(kg⋅°C), respectively. The latent heat of fusion for water is Lf = 334×103 J/kg. What is the final temperature of the mixture, in degrees Celsius?
The value of specific heat for copper is 390 J/kgC for aluminum is 900 J/kgC and for water is 4186 J/kgC. What will be the equilibrium temperature when a 265g block of copper at 255 degrees Celsius is placed in a 155 g aluminum calorimeter cup containing 845 g of water at 14
A metal block of mass 0.10 kg at 160°C is immersed in a copper calorimeter having 150 cm3 of water at 270C.If the temperature of the metal drops to a final value of 50°C, what is the specific heat of the metal? If heat is lost to the environment, is your answer lesser or greater than the real value of the specific heat of the metal? [Copper calorimeter is water equivalent to 0.025 kg].
A 1.50 kg iron horseshoe initially at 6000 C is dropped into a bucket containing 20 kg of water at 25.00C. What is the final temperature? ( Ignore the heat capacity of the container, and assume that a negligible amount of water boils away.) Specific heat of iron = 448 J/kg 0C Specific heat of water = 4186 J/kg 0C
A test is conducted to determine the overall heat transfer coefficient in a shell-and-tube oil-to-water heat exchanger that has 24 tubes of internal diameter 1.2 cm and length 2 m in a single shell. Cold water (cp = 4180 J/kg·K) enters the tubes at 20°C at a rate of 3 kg/s and leaves at 55°C. Oil (cp = 2150 J/kg·K) flows through the shell and is cooled from 120°C to 45°C. Determine the overall heat transfer coefficient Ui of this heat exchanger based on the inner surface area of the tubes.
A metal rod is 10 cm long and has a diameter of 2 cm one end is in contact with steam at 100 deg C while the other end contacts a block of ice at 0 deg C. The cylindrical surface of the rod is carefully insulated so heat flows only from one end to end. In a time of 20 minutes, 320 grams of ice melts. What is the thermal conductivity of the metal?
You have mW = 3.7 kg of water in an insulated container. You add mI = 0.75 kg of ice at TI = -21°C to the water and the mix reaches a final, equilibrium temperature of Tf = 12°C. The specific heats of ice and water are cI = 2.10×103 J/(kg⋅°C) and cW = 4.19×103 J/(kg⋅°C), respectively, and the latent heat of fusion for water is Lf = 3.34×105 J/kg. Calculate the initial temperature of the water, in degrees Celsius.
A short brass cylinder (r = 8530 kg/m3, cp =0.389 kJ/kg·K, k = 110 W/m·K, and a 5 *.39 3 1025 m2/s) of diameter 8 cm and height 15 cm is initially at a uniform temperature of 150°C. The cylinder is now placed in atmospheric air at 20°C, where heat transfer takes place by convection with a heat transfer coefficient of 40 W/m2·K. Calculate (a) the center temperature of the cylinder; (b) the center temperature of the top surface of the cylinder; and (c) the total heat transfer from the cylinder 15 min after the start of the cooling.