A 64 kg crate is dragged across a floor by pulling on a rope attached to the crate and inclined 13° above the horizontal. (a) If the coefficient of static friction is 0.50, what minimum force magnitude is required from the rope to start the crate moving? (b) If µk = 0.28 what is the magnitude of the initial acceleration (m/s^2) of the crate? (a) Number Units (b) Number Units

A 64 kg crate is dragged across a floor by pulling on a rope attached to the crate and inclined 13° above the horizontal. (a) If the coefficient of static friction is 0.50, what minimum force magnitude is required from the rope to start the crate moving? (b) If µk = 0.28 what is the magnitude of the initial acceleration (m/s^2) of the crate? (a) Number Units (b) Number Units

Name: A 64 kg crate is dragged across a floor by pulling on a rope attached
Uploaded: 2024-03-20T06:57:57.000Z
Channel: Bartleby
Description: A 64 kg crate is dragged across a floor by pulling on a rope attached to the crate and inclined 13° above the horizontal. (a) If thecoefficient of static friction is 0.50, what minimum force magnitude is required from the rope to start the crate mov

University Physics Volume 1

18th Edition

ISBN:9781938168277

Author:William Moebs, Samuel J. Ling, Jeff Sanny

Publisher:William Moebs, Samuel J. Ling, Jeff Sanny

Chapter6: Applications Of Newton's Laws

Section: Chapter Questions

Problem 40P: A service elevator takes a load of garbage, mass 10.0 kg, from a floor of a skyscraper under...

See similar textbooks

Similar questions

A service elevator takes a load of garbage, mass 10.0 kg, from a floor of a skyscraper under construction, down to ground level, accelerating downward at a rate of 1.2m/s2 . Find the magnitude of the force the garbage exerts on the floor of the service elevator?
If a single constant force acts on an object that moves on a straight line, the objects velocity is a linear function of time. The equation v = vi + at gives its velocity v as a function of time, where a is its constant acceleration. What if velocity is instead a linear function of position? Assume that as a particular object moves through a resistive medium, its speed decreases as described by the equation v = vi kx, where k is a constant coefficient and x is the position of the object. Find the law describing the total force acting on this object.
A mass m is being pushed by a horizontal force F of magnitude 209.0 N. The coefficient of kinetic friction between the two surfaces is 0.4. What is the magnitude of the acceleration of this mass as it gets to be pushed up the ramp?
the coefficient of static friction between block A and a horizontal floor is 0.320, and the coefficient of static friction between block B and the floor is 0.300. The mass of each block is 2.00kg,and they are connected together by a cord. If a horizontal force F pulling on block B is slowly increased ,in a direction parallel to the connectin cord,until the block start sliding ,what is the magnitude of F at the instant that they start to slide?
A boy has stacked two blocks on the floor so that a 5.00kgblock is on top of a1.60kg block. If the coefficient of static friction between the two blocks is 0.400 and the coefficient of static friction between the bottom block and the floor is 0.220,with what minimum force should the boy push horizontallyon the upper block to make both blocks start to slide together along the floor?
A student, crazed by final exams, uses a force of magnitude 80 N and angle u =70 to push a 5.0 kg block across the ceiling of his room ). If the coefficient of kinetic friction between the block and the ceiling is 0.40, what is the magnitude of the block’s acceleration?
A block (mass = 200.00 g) is placed on an inclined plane 45 degrees from the horizontal. The coefficient of static and kinetic friction between the block and the plane are 0.54 and 0.35, respectively. What is the frictional force between the block and the plane?
A 4.00 kg block rests on a 30 degree incline. If the coefficient of the static friction between the block and the incline is 0.700, what magnitude of horizontal force F must act on the block to start it moving up the incline?
An object of mass 50kg is pushed in the +x direction with a force of 40N flat along a horizontal surface causing a net acceleration of 0.15m/s2 in the +x direction. What is the coefficient of kinetic friction between the surface and the object?
A block of mass m1 = 3.9 kg is placed on top of a block with mass m2 = 5.4 kg. A force, F = is applied to m2, at an angle 16.1 degrees above the horizontal. If the coefficient of static friction between all moving surfaces is 0.42 and the coefficient of kinetic friction is 0.32, determine the magnitude of the minimum force that will get the blocks moving.
The coefficient of friction between a 33kg exercise mat and the gym floor are us = 0.41 and uk = 0.36. Q-Once the mat is moving, what magnitude of horizontal force will keep it moving at a constant velocity?
The coefficient of static friction between block A and a horizontal floor is 0.470, and the coefficient of static friction between block B and the floor is 0.300. The mass of each block is 2.00 kg, and they are connected together by a cord. If the horizonta force F pulling on block B slowly increased, in a direction parallel to the connecting cord, until the blocks start sliding, what is the magnitude of F at the instant that they start to slide?