A 68 kg crate is dragged across a floor by pulling on a rope attached to the crate and inclined 158 above the horizontal. (a) If the coefficient of static friction is 0.50, what minimum force magnitude is required from the rope to start the crate moving? (b) If mk = 0.35, what is the magnitude of the initial acceleration of the crate?

A 68 kg crate is dragged across a floor by pulling on a rope attached to the crate and inclined 158 above the horizontal. (a) If the coefficient of static friction is 0.50, what minimum force magnitude is required from the rope to start the crate moving? (b) If mk = 0.35, what is the magnitude of the initial acceleration of the crate?

Name: A 68 kg crate is dragged across a floor by pulling on a rope attached
Uploaded: 2024-03-20T06:57:57.000Z
Channel: Bartleby
Description: A 68 kg crate is dragged across a floor by pulling on a rope attached to the crate and inclined 158 above the horizontal. (a) If the coefficient of static friction is 0.50, what minimum force magnitude is required from the rope to start the crate mov

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter5: More Applications Of Newton’s Laws

Section: Chapter Questions

Problem 40P

See similar textbooks

Similar questions

A service elevator takes a load of garbage, mass 10.0 kg, from a floor of a skyscraper under construction, down to ground level, accelerating downward at a rate of 1.2m/s2 . Find the magnitude of the force the garbage exerts on the floor of the service elevator?
A car is stuck in the mud. A tow truck pulls on the car with the arrangement shown in Fig. P4.32. The tow cable is under a tension of 2 500 N and pulls downward and to the left on the pin at its upper end. The light pin is held in equilibrium by forces exerted by the two bars A and B. Each bar is a strut; that is, each is a bar whose weight is small compared to the forces it exerts and which exerts forces only through hinge pins at its ends. Each strut exerts a force directed parallel to its length. Determine the force of tension or compression in each strut. Proceed as follows. Make a guess as to which way (pushing or pulling) each force acts on the top pin. Draw a free-body diagram of the pin. Use the condition for equilibrium of the pin to translate the free-body diagram into equations. From the equations calculate the forces exerted by struts A and B. If you obtain a positive answer, you correctly guessed the direction of the force. A negative answer means that the direction should be reversed, but the absolute value correctly gives the magnitude of the force. If a strut pulls on a pin, it is in tension. If it pushes, the strut is in compression. Identify whether each strut is in tension or in compression.
A boy has stacked two blocks on the floor so that a 5.00kgblock is on top of a1.60kg block. If the coefficient of static friction between the two blocks is 0.400 and the coefficient of static friction between the bottom block and the floor is 0.220,with what minimum force should the boy push horizontallyon the upper block to make both blocks start to slide together along the floor?
A worker pulls a 15-kg crate in a straight line on a level surface by imparting a horizontal tension of 80 N to the free end of a cable whose other end is attached to the crate. If the coefficient of static friction is 0.40, what is the acceleration of the crate?
A student, crazed by final exams, uses a force of magnitude 80 N and angle u =70 to push a 5.0 kg block across the ceiling of his room ). If the coefficient of kinetic friction between the block and the ceiling is 0.40, what is the magnitude of the block’s acceleration?
the coefficient of static friction between block A and a horizontal floor is 0.320, and the coefficient of static friction between block B and the floor is 0.300. The mass of each block is 2.00kg,and they are connected together by a cord. If a horizontal force F pulling on block B is slowly increased ,in a direction parallel to the connectin cord,until the block start sliding ,what is the magnitude of F at the instant that they start to slide?
If a 2.89 kg object is placed on a horizontal surface, what is its magnitude of acceleration if the coefficient of kinetic friction is known to be 0.442 and an applied force of 37 N directed at an angle of -25.6 degrees relative to the +x direction acts on the object?
A 4.00 kg block rests on a 30 degree incline. If the coefficient of the static friction between the block and the incline is 0.700, what magnitude of horizontal force F must act on the block to start it moving up the incline?
A block (mass = 200.00 g) is placed on an inclined plane 45 degrees from the horizontal. The coefficient of static and kinetic friction between the block and the plane are 0.54 and 0.35, respectively. What is the frictional force between the block and the plane?
Two blocks are connected over a massless, frictionless pulley. Block m1 has a mass of 1.00 kg and block m2 has a mass of 0.400 kg. The angle θ of the incline is 30.0°. The coefficients of static friction and kinetic friction between block m1 and the incline are ?k = 0.400 and ?s = 0.500, respectively. What is the magnitude of the tension in the string?
The coefficient of static friction between a 2.0 kg box and a plane inclined 28° to the horizontal is 0.65. What maximum applied force can be exerted on the box without moving it?
A mass m is being pushed by a horizontal force F of magnitude 209.0 N. The coefficient of kinetic friction between the two surfaces is 0.4. What is the magnitude of the acceleration of this mass as it gets to be pushed up the ramp?