Answered: A 8.1m diameter balloon is filled with…

Name: A 8.1m diameter balloon is filled with helium at 16°C and 192.46kPa.
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A 8.1m diameter balloon is filled with helium at 16°C and 192.46kPa. Determine the mass of the helium in the balloon. Round your answer in 2 decimal places.

Engineering

Mechanical Engineering

A 8.1m diameter balloon is filled with helium at 16°C and 192.46kPa. Determine the mass of the helium in the balloon. Round your answer in 2 decimal places.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.121P: One side of the container has a 03-m square door that is hinged at its top edge. If the container is...

See similar textbooks

Similar questions

The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate and the smooth surface at B due to water pressure acting on the gate. Use =62.4lb/ft3 for water.
The volume of an aluminum ball at 5°C is 10cc, determine its new volume if it is heated to a temperature of 60°C.
A volume of 450 cm3 of air is measured at a pressure of 740 mm Hg absolute and atemperature of 20°C. If the pressure and temp changes to 760 mm Hg absolute and 0°C.Determine the final volume in cm3.
The pressure at a point in the seawater is 68kpa, determine the pressure in kpa 26.87 meters below this point?
The pressure at a point in the seawater is 100 kPa, determine the pressure in kPa 33.43 meters below this point?
Determine the absolute pressure exerted by the seawater in kPa on the body of the diver if he descends 128.44 m to a sunken ship. Assume that the density of 1,025.465 kg/m3 and the barometric pressure is 101.725 kPa.
6400 ounces of nitrogen at 25°C and 20 m3 volume . Some of the nitrogen is allowed to escape, until the mass nitrogen drops to 305 lb. If the temperature at this point is 20°C, determine the pressure difference. Your answer
A tire having a volume of 3 ft3 contains air at a gage pressure of 26 psi and a temperature of 70°F. Determine the density (slugs/ft3) of the air contained in the tire. For air, R = 1.716 x 103 ft-lb/slug-°R.
The initial pressures at A and B are the same at 103 kPa. If the pressure at the liquid at A (SG1 = 1.25) is increased to 148 kPa while keeping the pressure at B constant, determine the new position (Δh, in mm.) of the mercury meniscus inside the tube as shown. Assume no change in the liquid densities. The connecting tube is a 1-cm in diameter, Y1 = 0.51 cm, and the inclination of the tube is 18 degrees with respect to the horizontal. Assume unit weight of air to be negligible.
If the plate is replaced with a vertical triangular plate (base = 5ft and height = 12ft) where its base is submerged by 12ft below the water surface, determine the location of the hydrostatic force and center of pressure. Answer is 23,920 lbf and 15.6957ft
Determine the capillary rise of kerosene at 68°F IN INCHES in a glass tube having a diameter of 0.25 inches From given: Density of kerosene at 68°F =1.57 slugs/ft^3 Surface tension of kerosene at 68°F =0.0017 lb/ft
A water tank, open at the top, consists of a right circular cylinder and a right circular cone, as shown. If the altitude of the cylinder is three times its radius, and the altitude of the cone is two times the same radius, find the altitude of the cylinder (1 gal=231 cu. in.).