A circular shaft of 20 mm diameter subjected to tensile load showed that 32% reduction at fracture point if stress-strain curve is define by a= 250 € 0 MPa Calculate: 1. Range of UPD & NPD regions. 2. The necking & fracture force

A circular shaft of 20 mm diameter subjected to tensile load showed that 32% reduction at fracture point if stress-strain curve is define by a= 250 € 0 MPa Calculate: 1. Range of UPD & NPD regions. 2. The necking & fracture force

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.2.8P: A spherical steel pressure vessel (diameter 500 mm, thickness 10 mm) is coated with brittle lacquer...

See similar textbooks

Related questions

Q: A tank filled with 4716 Liter water emptied within 19 minutes. What is the flow rate in m³/h?

Q: mer day, you decide to make some iced tea. First, you brew 1.50 L of hot tea and leave it to steep…

A: Given data as per question Volume of hot tea, V=1.5 L Temperature of tea, Ttea =75°C Mass of ice,…

Q: Pin P at the end of the telescoping rod shown below slides along the fixed guide, which lies in the…

Q: 7. A 0.05 kg golf ball moving at 30 m/s collides with a 0.6 kg wooden block at rest. The golf ball…

A: For solution refer below images.

Q: For the translational system shown as figure. (1) Give the differential equations of the system or…

Q: Block A (m = 5 kg), seen in the figure, sits on a smooth surface and is attached by a slender rod to…

Q: The cylindrical plunger traveling at V₂ = (0.007 t¹/2) m/s, where t is in seconds, injects a liquid…

Q: A satellite is subjected to solar energy at a rate of 95 Btu/h ft². The absorptivity of the surface…

A: Given data:- Solar energy= 95 Btu/hr-ft2 Absorptivity =0.8 Emissivity= 0.65 To find:- Equilibrium…

Q: Find the centroid of the machine element shown in the figure below with respect to the given axis.

Q: Hot working is a good way to shape brittle material 1) True 2) False

A: It is true that hot working is a good way to shape brittle material.

Q: Problem 2.151: Energy Dissipated in Viscous Damping Find the energy dissipated during a cycle of…

Q: 2. A 20 kg box sitting on a horizontal surface is pulled by a horizontal force of 64 N. The…

A: Given:Mass of the block, m=20 kgHorizontal force, F=64 NCoefficient of kinetic friction, μ=0.2

Q: A cube of metal that weighs 12.5 kg is submerged in water. While submerged, it is found to weigh…

Q: The motor is towing the crate that has a mass of mc= 1000 kg, and rests on the flat surface. It…

A: Given: The tension equation, T = 500t5/2 The mass of crate, m = 1000 kg The coefficient of static…

Q: A wall made of wood is 4.00 cm thick and has an area of 48.0 m² if the temperature inside is 25 °C…

A: Given data as per question Thickness of wooden wall, L=4 cm=0.04 m Area of wooden wall, A=48 m2…

Q: Draw three views of the wedge block. Dimension the object using datum dimesnioning

A: The required orthographic views of the given object are drawn with true dimensions shown in the…

Q: >, A wedge is used to lift (impending motion) an 11-kg block. The coefficient of static friction for…

Q: A tank is 6 m long, 4 m wide, 5 m high, and contains kerosene with density 820 kg/m³ to a depth of…

Q: At the instant shown, the disk is rotating with an angular velocity of w = 2 rad/s and has an…

Q: What is the function of the control rods in a reactor?

Q: Water as a saturated liquid at 7.5 kPa and 40.29 deg C enters a pump and leaves the pump as a…

A: Given : water enters as saturated liquid p=7.5 Kpa And leaves the pump as subcooled liquid…

Q: 8-45. The beam AB has a negligible mass and thickness and is subjected to a triangular distributed…

A: The given question is solved by drawing the free body diagram of individual beams and then applying…

Q: A thick-walled steel, compound cylinder has the following dimensions: Internal radius, r;= 0.1m…

A: Solution: Given Data: ri=0.1 mrint=0.2 mro=0.35 mEsteel=210 GPaσRIS=-100 MPa To Find:

Q: Get the transfer function for X3 2 N-s/m DAXIA_A_ 6 N/m 100004 kg x₁(t) 2 N-s/m [4 kg - x₂(1) oooo 6…

A: Given,

Q: Two kilograms of air are heated from 300 to 500 K. Find the change in enthalpy by assuming a.…

Q: A thin-walled vessel is subject to an internal pressure of 202.8bar and an external positive torque…

A: Given data, Internal pressure, P = 202.8 bar = 20.28 MPa Applied positive torque, T = 3508 Nm Vessel…

Q: An escalator raises a 188 lbf bucket of sand 16 ft in 2 minute. Determine the instantaneous rate of…

Q: A river has a flow rate of 500 m3/s in an upstream point with an elevation of 2000 m. At a point…

A: Here mentioned that flow remaining the same at up stream side and downstream side. That means here…

Q: Problem The lap joint shown in Figure is fastened by three (20mm) diameter rivets. Assuming that…

Q: Required information Problem 09.015 - 3-Step Air-Standard Cycle with Constant Specific Heats -…

Q: The uniform 24-kg plate is released from rest at the position shown. Determine its initial angular…

Q: Gasses are compressible. Select one: True False

Q: An Earthball of mass 13.6 kg is rolling forward at 5.29 m/s when pushed by two students. A senior…

Q: (b) A piston and water are accelerated upwards with an acceleration of 0.5g as shown in Fig.1.…

Q: Q/ Mention 10 applications of internal combustion engines?

A: Internal combustion engines are the engines in which the fuel and working fluid are mixed and burned…

Q: The disk weighs 50 lb and has a radius of gyration (kg) of 0.8 ft, and a couple moment of 35 lb-ft…

Q: A Pratt truss supports three forces at joints along the bottom edge, as shown in the figure below.…

Q: The principal stress o2 is A ksi T 25 ksi

A: Given:To determine the principal stress σ2 from the Mohr's circle given.

Q: A uniform light beam has length 6 m. The left hand side rests on a roller and the right hand side is…

A: Given: Length of the beam→L=6 m Uniform downward load→w=2 KN/m concentrated downward load at x=2…

Q: hot tub in his backyard and finds that, for t operating conditions shown in the sketch, w be added…

A: Given data as per question m˙=0.001 kg/sFor AirT∞=290 K, ϕ∞=0.3For Hot waterT=310 K

Q: An object stretches a spring 6 inches in equilibrium. Find its displacement for t > 0 if it's…

A: Solution 4: Given Data: δ=6 inx0=3 indx0dt=6 in/s To Find: Frequency, fPeriod, TAmplitude, APhase…

Q: The tractor is used to lift the 50-kg load B with the 27-m long rope, boom, and pulley system. The…

Q: Transformations (strain) Q43 A strain guage rosette is placed on the outside surface of a loaded…

A: Calculating the maximum in-plane principal strain and the minimum in-plane principal strain (in…

Q: The three legs of a small glass-topped table are equally spaced and are made of steel tubing, which…

A: Solution: Given Data: D=24 mmA=220 mm2d=600 mmt=10 mmρs=7860 kg/m3ρg=2190 kg/m3 To Find: X-Y-Z-

Q: If a closed tank contains compressed air and oil (SGoil = 0.90), with a U-tube manometer using…

A: Given:Specific gravity of oil, SGoil=0.9Specific gravity of mercury, SGHg=13.6Column heights:h1=0.5…

Q: Q: Does an inverse distribution occur at room temperature?

A: Generally inverse distribution regards with the inverse distribution of a random variables. But when…

Q: Can you elaborate on answer ? Also what would be the answer for question b? I don't understand your…

Q: Learning outcome Fundamental.8 evaluation Fundamental.8 deals with the equation of motion. The use…

Q: Vickers microhardness tests have been conducted on a brass specimen. For an applied load (P) of 1000…

Q: The mass of the homogeneous thin metal plate is 108 kg. 1. Find the coordinates of the center of…

A: Given: The mass of the plate →m=108 Kg Radius of the semi circle →R=3 m From the given figure above:…

Concept explainers

Thermal Properties of Materials

In mechanical engineering, the thermal property is represented as the physical quantity that is relevant to the application of heat. The thermal properties are evaluated by variations in any specific material due to low heat or high heat. The quantities that influence the thermal property of the materials are mass, density, temperature, and many others.

Question

I need a clear answer by hand, not by keyboard and fast answer within 20 minutes. Thank you | dybala

A circular shaft of 20 mm diameter subjected to tensile load
showed that 32% reduction at fracture point if stress-strain
curve is define by a= 250 € 0 MPa Calculate:
1. Range of UPD & NPD regions.
2. The necking & fracture force

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Types of Properties of Engineering Materials

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The rails of a railroad track are welded together at their ends (to form continuous rails and thus eliminate the clacking sound of the wheels) when the temperature is 60°F. What compressive stress ?? =6.5×10-6 /? is produced in the rails when they are heated by the sun to 120"F if the coefficient of thermal expansion a = the modulus of elasticity E = 30 × 106 psi?
A spherical steel pressure vessel (diameter 500 mm, thickness 10 mm) is coated with brittle lacquer that cracks when the strain reaches 150 X 10~ (see figure). (a) What internal pressure p will cause the lacquer to develop cracks? (Assume E = 205 GPa and v = 0.30.) (b) If the strain is measured at 125 x 10-6, what is the internal pressure at that point?
(a) Solve part (a) of the preceding problem if the pressure is 8.5 psi, the diameter is 10 in., the wall thickness is 0,05 in., the modulus of elasticity is 200 psi, and Poisson's ratio is 0.48. (b) If the strain must be limited to 1.01, find the maximum acceptable inflation pressure
8.a) Calculate the theoretical fracture strength of a brittle material wherein fracture occurs by propagation of an elliptically shaped 0.25 mm surface crack with a 1.2 × 10-3 mm tip radius under an applied 1200 MPa stress. b) If the specific surface energy for a material is 0.30 J/m2 and its elastic modulus is 69 GPa, calculate the minimum stress required for propagation of a surface crack 0.05 mm in length. Based on this calculation, estimate the materials fracture toughness.
A plate with width w = 90 mm and thickness t = 5 mm carries a uniformly distributed tensile force P = 30 kN in longitudinal direction. The plate has an external transverse crack with length of 18 mm. To prevent sudden fracture, calculate the minimum required critical stress intensity factor (KIc) for mode I (in MPa.m1/2) for the plate material. Assume a safety factor of n = 2.4.
cylindrical specimen of steel having an original diameter of 0.505 in. is tensile tested to fracture and found to have an engineering fracture strength of 67,000 psi. If its cross-sectional diameter at fracture is 0.422 in, determine:(a) The ductility in terms of percent reduction in area(b) The true stress at fracture
A shaft is loaded in bending and torsion such that Ma = 70 N * m, Ta = 45 N * m, Mm = 55 N * m, and Tm = 35 N * m. For the shaft, Su = 700 Mpa, the true fracture strength is 1045 MPa, and a fully corrected endurance limit of Se = 210 MPa is assumed. Let Kf = 2.2 and Kfs = 1.8. With a design factor of 2.0 determine the minimum acceptable diameter of the shaft using: a. DE-Goodman criterion b. DE-Morrow criterion c. DE-Gerber criterion d. DE-SWT criterion Discuss and compare the results.
A 200mm long rod with a diameter of 50mm is loaded with a 4kN weight. The rod final length 201.314mm and final diameter 42mm the load at fracture is 2.5kN and the maximum load is 3.5KN. 1. Calculate percentage of reduction in area 2. Calculate elongation
A round bar of 25mm in diameter undergoes a tensile load of 120kpa. The gage length is 30cm and fracture length is 33.54cm.Compute the axial strain every 10mm
A 200mm long rod with a diameter of 50mm is loaded with a 4kN weight. The rod final length 201.314mm and final diameter 42mm the load at fracture is 2.5kN and the maximum load is 3.5KN. 1. Calculate the stress 2. Calculate the strain 3. Calculate limit of proportionality
An 820 MPa (145,000 psi) stress is applied to a specimen of 4341 steel alloy, which has a plane strain fracture toughness of 45MPa squareroot (m). If the greatest surface crack is 0.95 mm (0.03 in) long, will this specimen fracture as a result? Assume that the parameter Y is 1.22.
A 50 mmm long circular rod of the AISI 1015 hot rolled steel with a diameter of 12.5 mm is loaded in tension to failure. From the test it is learnt that the yield strength = 315 MPa, the tensile strength = 420 MPa, the elongation at fracture = 39% and the reduction in area = 51%. It is also observed that 45% of the total elongation was uniform in nature prior to the onset of necking. a) What is the true strain at fracture? b) Calculate the true stress at the point of onset of plastic instability c) What is the the strength coefficient K for this steel?