ANSWER SHOULD BEANSWER KEY:13) 268.17 kN14) 149.16 kN15) 3.70 MPaPlease answer number 13, 14, and 15. Thank you 14. What is the nominal shear strength provided by the shear reinforcement?c. 149.16 kNa. 249.16 kNb. 294.16 kNd. 194.16 kN15. Find the shear stress in the column if Vu = 800 kN.а. 3.50 МPаb. 5.30 MPac. 3.70 MPad. 7.30 MPa SITUATION 5.A column 600 mm in diameter is reinforced with 8-25mmø bars and 12 mm spirals spaced at 100 mmon centers.$ = 0.75fy = 413 MPafyt = 275 MPa for spiralsf. = 30 MPa13. What is the nominal shear strength provided by the concrete?c. 186.17 kNd. 168. 17 kNa. 286.17 kNb. 268.17 kN

A column 600 mm in diameter is reinforced with 8-25mme bars and 12 mm spirals spaced at 100 mm on centers. O = 0.75 fy = 413 MPa fx = 275 MPa for spirals f = 30 MPa 13. What is the nominal shear strength provided by the concrete? c. 186.17 kN d. 168. 17 kN a. 286.17 kN b. 268.17 kN

A column 600 mm in diameter is reinforced with 8-25mme bars and 12 mm spirals spaced at 100 mm on centers. O = 0.75 fy = 413 MPa fx = 275 MPa for spirals f = 30 MPa 13. What is the nominal shear strength provided by the concrete? c. 186.17 kN d. 168. 17 kN a. 286.17 kN b. 268.17 kN

Physics for Scientists and Engineers with Modern Physics

10th Edition

ISBN:9781337553292

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter14: Fluid Mechanics

Section: Chapter Questions

Problem 7P: Review. A solid sphere of brass (bulk modulus of 14.0 1010 N/m2) with a diameter of 3.00 m is...

See similar textbooks

Related questions

Q: 2. A cube with a length of 10cm is made up of Aluminum metal (S = 25x10⁹ Pa). A horizontal shear…

Q: 2. A horizontal force of 1.2 N is applied to the top of a stack of pancakes 13 cm in diameter and…

A: (2) Write the given values with the suitable variables. F=1.2 Nd=13 cm=0.13 mh=9 cm=0.09 mΔx=2.5…

Q: 7- A steel wire of length 1.5 mand diameterl mmis joined to an aluminumwire of identical dimensions…

A: “Since you have asked multiple question, we will solve the first question for you. If youwant any…

Q: 2. A brass wire is to withstand a tensile force of 350N without breaking. Note that the breaking…

Q: a Example : If the Xylem(is) ( tiny tube which plant has a radius of 0.001cm ,how high can we expect…

Q: Q4 A: An aluminum bar 125 mm long and having a square cross section 16.5 mm on an edge is pulled in…

A: Step:1 The ratio of Normal stress and longitudinal strain is defined as the modulus of…

Q: A cube made of an unknown material has a dimension of 6cm on all edges. If the upper surface is…

A: We are allowed to give the explanation of first question only which is given below. Please repost…

Q: F = 150000 +/- 150 lbf Side length = 1.2 +/- 0.025 in Modulus of Elasticity = 25000 +/- 11.5 ksi…

A: F = 150000 +/- 150 lbf. Here, the absolute error is 150000 lbf and the actual value is 150 lbf.

Q: 2.) A Rubber band 20cm long has cross-sectional area of 4 mm². What load will stretch the rubber…

Q: 5. A helical steel spring is composed of 20 turns of 20 mm diameter wire on a mean radius of 80 mm…

Q: 2. A copper 20 inches long is pulled by tension with a stress of 300 MPa. If the deformation is…

A: Given data: Original length of copper is, L=20 in.=20×0.0254=0.508 m. Stress exerted is, σ=300…

Q: 5. The ultimate strength of a metallic wire for tension is 2.0 x10^8 Pa. The wire was set up with a…

A: Given Maximum Pressure Pmax = 2.0 x 108 Pa Mass m = 200 kg Diameter D = 0.50 cm = 0.50 x 10-2 m

Q: For flow over a plate, the variation of velocity with vertical distance y from the plate is given as…

A: The expression for the velocity distribution,

Q: You have a piece of uniformly shaped 5.78 cm long yarn, the diameter of which you can neglect. If…

A: Given : L = 5.78 cm = 0.0578 m Q = 4.69 × 10-10 C

Q: 3. A steel bar and an aluminium bar are each under a load of 5000 N. If the cross-sectional area of…

A: The Young's modulus of elasticity gives the mechanical strength of a material. It gives the ability…

Q: 4. A solid steel structure is supported by 4 plastic legs 1 cm in diameter. The Su of the plastic is…

Q: 3. A solid spherical material made of rubber with was exposed to a change in pressure of 85 Pa. Its…

Q: 1. Calculate the elongation of the cable due to load, if a steel cable of 4cm diameter is used to…

Q: A large 3.00x104 L aquarium is supported by four wood posts (Douglas fir) at the corners. Each post…

Q: A 2.25 m long solid bar (Lo) with a 32 mm diameter is placed under tension by a load (F) of 250 kN.…

Q: 7. A vertebra experiences a shearing force, F; = 600N. What is the magnitude of the shear…

Q: Question 9 Determine the maximum shearing stress in a helical steel spring composed of 20 turns of…

Q: • Failure: along grain boundaries. g.b. cavities Time to rupture, tr ● applied Stress ● Estimate…

A: Given, S-590 Iron Applied Stress = 20 ksi = 20000 psi At stress, σ = 20000 psi Larson-Miller…

Q: A high-speed lifting mechanism supports a 840-kg object with a steel cable that is 31.0 m long and…

Q: 7. Which of the, following statements defines the stiffiness of a material? A Aheasure of how…

A: Here given the stiffness of the materials. We have to define which statements are true.

Q: (#1) A metal has a flexural stress of 564 Pa. The width of the metal, w, is measured to be 1 meter,…

Q: Determine the maximum shear of the beam loaded as shown. 400kN 10kN/m 10m 10m 20m R1 R2

Q: 444 N A uniform bar AB is resting in a horizontal position on smooth inclines as shown below.…

Q: An example of large-scale shape elasticity are the plates of the Earth's crust. Consider a 31.2 km…

Q: 1. The second floor portion of a house is about to break down, so it was propped up by an iron…

Q: For a brass alloy, the stress at which plastic deformation begins is 350 MPa, and the modulus of…

A: Solution: Given that Plastic strentgh = 350 MPa E = 103 GPa

Q: A high-speed lifting mechanism supports a(n) 860-kg object with a steel cable that is 38.0 m long…

A: Given that:- Mass of object=860 kg

Q: 2) What force is required to punch a 20-mm-diameter hole in a plate that is 25 mm thick? The shear…

A: Diameter of the hole d=20 mm (radius r=d/2=10 mm), thickness of the hole h=25 mm and shear strength…

Q: 21. Assume if the shear stress in steel exceeds about 4.00 x T 10 N/m2, the steel ruptures.…

A: Shear stress is defined as shearing force per unit area. It is the force that causes a change in the…

Q: A vertical steel beam in a building supports a load of 6.0 x 104 N. a) If the length of the beam…

A: Force= 60000 N Length of beam = 4 m Area = 8 x 10-3 m2

Q: Q6. A 2.25 m long solid bar (Lo) with a 32 mm diameter is placed under tension by a load (F) of 250…

Q: (b) What is the value of Young's modulus for this alloy? i. 5.6 x 107 N/m²

Q: 1. Consider the brass alloy for which the stress-strain behavior is a cylindrical specimen of this…

Q: 1. A 100 mm deep stream of water (p = 1.14 x 10-3 Pa.s) is flowing over a boundary. It is considered…

A: Given depth(∆y)=0.1 m dynamical viscosity (μ)=0.00114 Pa s velocity at surface (∇v)=1.6 m/s…

Q: A hollow member having the cross section shown is formed from steel alloy sheet of 2mm thickness.…

A: Given data The thickness of the sheet is t = 2 mm The shearing stress is τs = 3 MPa The shear…

Q: (a) determine the maximum tensile stress, the maximum compressive stress, and the maximum shear…

Q: 1. If the paint has a mass of 10.0 kg, determine the values of the stresses T and T.

Q: 1.3 A liquid flows between parallel boundaries as shown above. The velocity distribution near the…

Q: 2 - A hole is to be punched out of a plate having a shearing strength of 260 MPa. The compressive…

A: Given: shear strength τ = 260 MPa compressive stress σ=330 MPa(a)diameter of hole d = 20 mmwe have…

Q: During heavy lifting, a disk between spinal vertebrae is subjected to a 5000-N compressional force.…

A: (a) The expression for pressure is written as, Here, F and A represent the force and the area,…

Q: 2. A material is 250 cm long, 8 cm wide and 10 cm deep. The material is subjected to an axial force…

A: Length of the material L = 250 cm Width of the material b = 8 cm Depth of the material d = 10 cm…

Question

ANSWER SHOULD BE

ANSWER KEY:

13) 268.17 kN

14) 149.16 kN

15) 3.70 MPa

Please answer number 13, 14, and 15. Thank you

14. What is the nominal shear strength provided by the shear reinforcement?
c. 149.16 kN
a. 249.16 kN
b. 294.16 kN
d. 194.16 kN
15. Find the shear stress in the column if Vu = 800 kN.
а. 3.50 МPа
b. 5.30 MPa
c. 3.70 MPa
d. 7.30 MPa

SITUATION 5.
A column 600 mm in diameter is reinforced with 8-25mmø bars and 12 mm spirals spaced at 100 mm
on centers.
$ = 0.75
fy = 413 MPa
fyt = 275 MPa for spirals
f. = 30 MPa
13. What is the nominal shear strength provided by the concrete?
c. 186.17 kN
d. 168. 17 kN
a. 286.17 kN
b. 268.17 kN

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step by step

Solved in 4 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

Explain why the viscosity of a liquid decreases with temperature—that is, how might increased temperature reduce the effects of cohesive forces in a liquid? Also explain why the viscosity of a gas increases with temperature—that is, how does increased gas temperature create more collisions between atoms and molecules?
During heavy lifting, a disk between spinal vertebrae is subjected to a 5000-N compressional force. (a) What pressure is created, assuming that the disk has a uniform circular cross section 2.00 cm in radius? (b) What deformation is produced if the disk is 0.800 cm thick and has a Young's modulus of 1.5109N/m2 ?
Review. On a day that the temperature is 20.0C, a concrete walk is poured in such a way that the ends of the walk are unable to move. Take Youngs modulus for concrete to be 7.00 109 N/m2 and the compressive strength to be 2.00 109 N/m2. (a) What is the stress in the cement on a hot day of 50.0C? (b) Does the concrete fracture?
A high-speed lifting mechanism supports an 800.-kg object with a steel cable that is 25.0 m long and 4.00 cm2 in cross-sectional area. (a) Determine the elongation of the cable. (b) By what additional amount does the cable increase in length if the object is accelerated upward at a rate of 3.0 m/s2? (c) What is the greatest mass that can be accelerated upward at 3.0 m/s2 if the stress in the fable is not to exceed the elastic limit of the cable, which is 2.2 108 Pa?
Artificial diamonds can be made using high-pressure, high-temperature presses. Suppose an artificial diamond of volume 1.00 106 m3 is formed under a pressure of 5.00 GPa. Find the change in its volume when it is released from the press and brought to atmospheric pressure. Take the diamonds bulk modulus to be B = 194 GPa.
A 50.0-kg woman wearing high-heeled shoes is invited into a home in which the kitchen has vinyl floor covering. The heel on each shoe is circular and has a radius of 0.500 cm. (a) If the woman balances on one heel, what pressure does she exert on the floor? (b) Should the homeowner be concerned? Explain your answer.
During heavy lifting, a disk between spinal vertebrae is subjected to a 5000-N compressional force. (a) What pressure is created, assuming that the disk has a uniform circular cross section 2.00 cm in radius? (b) What deformation is produced if the disk is 0.800 cm thick and has a Young’s modulus of 1.50 X 109 N/m2?
A vertebra experiences a shearing force, Fs = 600N. What is the magnitude of the shear deformation if the vertebra is treated as a cylinder 3 cm in height and 2 cm in radius? S = 107 N/m2.
3.) A cube made of an unknown material has a dimension of 6cm on all edges. If the upper surface is displaced laterally by 0.1mm by a force of 2x10⁶ dynes acting parallel to the surface, calculate the shear modulus of the material. 4.) If the density of seawater is 1.04g/cm³ at the surface, what is its density at a depth where the pressure is 10⁹ dynes/cm²?
A square flat plate of dimensions 1 m x 1 m is moving with a maximum speed , U causing a fully laminar motion of it inside air ( density :1,2 kg /m3 viscosity :1.5x10-5 m2 /s ) Determine the magnitude of Shearing Stress on the surface of the plate SS=? at plate's trailing edge.ANSWER:SS= 0,0317 Pa
A 9 16 -in.-diameter steel rod is tested in tension and elongates 0.00715 in. in a length of 8 in. under a tensile load of 6500 lb. Compute (a) the stress, (b) the strain, and (c) the modulus of elasticity, E, based on this one reading. The proportional limit of this steel is 34,000 psi.
During heavy lifting, a disk between spinal vertebrae issubjected to a 5000-N compressional force. (a) Whatpressure is created, assuming that the disk has a uniformcircular cross section 2.00 cm in radius? (b) Whatdeformation is produced if the disk is 0.800 cm thick and hasa Young’s modulus of 1.5×109 N/m2 ?