A consolidated undrained (CU) triaxial compression test is conducted on a normally consolidated clay at a confining pressure of 100 kPa. The deviator stress at failure is 80 kPa, and the pore-water pressure measured at failure is 50 kPa. The effective angle of internal friction (in degrees, up to one decimal place) of the soil is

A consolidated undrained (CU) triaxial compression test is conducted on a normally consolidated clay at a confining pressure of 100 kPa. The deviator stress at failure is 80 kPa, and the pore-water pressure measured at failure is 50 kPa. The effective angle of internal friction (in degrees, up to one decimal place) of the soil is

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter12: Shear Strength Of Soil

Section: Chapter Questions

Problem 12.20P

See similar textbooks

Similar questions

Following are the results of consolidated-undrained triaxial tests on undisturbed soils retrieved from a 4-m thick saturated clay layer in the field (sat = 20.7 kN/m3). a. Estimate graphically the Mohr-Coulomb shear strength parameters c' and '. b. Estimate the shear strength in the middle of the clay layer.
A consolidated undrained (CU) triaxial compression test is conducted on a normally consolidated clay at a confining pressure of 100 kPa. The deviator stress at failure is 80 kPa, and the pore-water pressure measured at failure is 50 KPa. The effective angle of internal friction (indegrees, up to one decimal place) of the soil is..?
A consolidated-drained triaxial test was conducted on a normallyconsolidated clay. Compute the angle, θ that the failure plane makes with the major principal stress, if the laboratory test results is givenas follows
A consolidated-drained triaxial test on a normally consolidated clay yielded a friction angle, Φ', of 28°. If the all-around confining pressure during the test was 140 kN/m2, what was the major principal stress at failure?
A specimen of normally consolidated clay was consolidated under a chamber confining pressure of 280kpa for a drained test by how much does the axial stress have to be reduced to cause failure by axial extension?
The effective internal friction angle of a normal compacted clay is 33°, the triaxial test of this clay specimen is carried out, and the applied confining pressure is 115 kN/m2. (1) If the compaction undrained test is carried out, the axial differential stress at failure is 102 kN/m2, and the water pressure in the clay test body at failure is determined. (2) If the compaction drainage test is carried out, the applied confining pressure is still 115 kN/m2, and the axial difference stress at the time of failure is determined.
For a normally consolidated insensitive clay angle of friction_CD = 30°. Deviator stress at failure of the same soil is 250 kN/m2 in CU test. If Skempton’s A-parameter at failure is 0.62, find out angle of friction_CU for this soil.
Consolidation of an undrained clay occurs at an effective pressure of 100 kPa and a shear stress of 40 kPa. The ratio of effective pressure to shear stress in drained clay is 2 to 1. If the shear stress at zero effective pressure, To, is 10 kPa, what is the pore water pressure at failure? A. 10 kPa в. 40 кра с. 53 кра D. 67 kPa
A consolidated-drained triaxial test was conducted on a normally consolidated clay with a chamber pressure, σ3 = 276 kN/m2. The deviator stress at failure is = 276 kN/m2. Determine: a. The angle of friction b. The angle θ that the failure plane makes with the major principal plane c. The normal stress, σf, and the shear stress, τf, on the failure plane
Calculate the internal friction angle of a f-type soil that fails at shear stress of 150 kN/m2 when tested under a normal stress of 240 kN/m2.
A consolidated drained tri-axial test was conducted on normally consolidated clay. The results were: the confining pressure is 300 kPa and the deviators stress is 300 kPa. Compute the angle that the failure plane makes with the major principal axis in degrees. show free body diagram. a.54.74 b.16.3 c.24.72 d.19.47
A specimen of saturated sand was consolidated under an all-around pressure of 105kN/m2.The axial stress was then increased and drainage was prevented.The specimen failed when the axial deviator stress reached 70 KN/m2.The pore water pressure at failure was 50 KN/m2.Determine:i. Consolidated-undrained angle of shearing resistance, ɸii. Drained friction angle, ɸ′iii. Sketch Mohr’s circles and Failure Envelops in terms of total and effective stress.iv. Assuming soil specimen to be homogenous, sketch a network of failure planes.