A continuous beam ABCD is simply supported over three spans AB = 1m, BC= 2m, and CD = 2m. The first span carries a central load of 20kN and the third span a uniformly distributed load of 30kN /m. The central span remains unloaded. Calculate the bending moments at B and C and draw the S. F. and B. M. diagrams.

A continuous beam ABCD is simply supported over three spans AB = 1m, BC= 2m, and CD = 2m. The first span carries a central load of 20kN and the third span a uniformly distributed load of 30kN /m. The central span remains unloaded. Calculate the bending moments at B and C and draw the S. F. and B. M. diagrams.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter5: Stresses In Beams (basic Topics)

Section: Chapter Questions

Problem 5.8.5P: Two wood beams, each of rectangular cross section (3.0 in. x 4.0 in., actual dimensions), are glued...

See similar textbooks

Similar questions

Two wood beams, each of rectangular cross section (3.0 in. x 4.0 in., actual dimensions), are glued together to form a solid beam with dimensions 6.0 in. x 4.0 in. (sec figure). The beam is simply supported with a span of S ft. What is the maximum moment Mmaxthat may be applied at the left support if the allowable shear stress in the glued joint is 200 psi? (Include the effects of the beams own weight, assuming that the wood weighs 35 lb/ft3.) Repeat part (a) if Mmaxis based on allowable bending stress of 2500 psi.
Aluminum 10K 12' Steel A 12' long beam in supported by an aluminum hanger at A and by a steel hanger at B. The beam carries a single 10K concentrated load. Neglect the self-weight of the beam. Both hangers have the same original length. Ealum = 10,000,000 psi Esteel = 29,000,000 psi If the load is located at midspan, and the steel hanger is a 1/2" x 1/2" bar, what is the width of the 1/2" aluminum bar, such that points A and B lie on the same horizontal line?
A beam ABCDE is simply supported at A and D. It carries the following loading: a distributed load of 30 kN/m between A and B; a concentrated load of 20 kN at B; a concentrated load of 20 kN at C; a concentrated load of 10 kN at E; a distributed load of 60 kN/m between D and E. Span AB=1.5 m BC=CD=DE=1 m. A. Draw the FBD B. Calculate the value of the reactions at A and D and hence draw the S.F. and B.M. diagrams. C. What are the magnitude and position of the maximum B.M. on the beam?
please translate the following problem descriptions into al diagrammatic representation, solve for/draw the shear force and bending moment diagrams and find the deflection and/or slope as indicated: 3. A 16 ft. long simply supported beam is loaded by a 1 k/ft uniform distributed load for the first 6 ft. and (2) point loads, 3 kips each, at 9 ft. and 12 ft. A Structural No. 1 timber (E = 1,600,000 psi) is specified with nominal dimensions of 6x12. Find the magnitude and location of the maximum deflection.
The wood beam supports loads of w = 410 Ib/ft and P = 840 lb on span lengths of LAB = 10.8 ft, LBC = 5.4 ft, and LcD= 5.4 ft. The beam cross section has dimensions of bq = 1.9 in., dq = 5.7 in., b2 = 5.0 in., and d2 = 14.95 in. Determine the magnitude and location of: (a) the maximum horizontal shear stress in the beam. (b) the maximum tensile bending stress in the beam. %3D %3D P d d2 В C D LAB LBC LCD b2 Answer: (a) Tmax psi (b) Omax psi
7. A 33 m beam has two supports. It overhangs each support by 5 m. The beam carries a point load of 600 kN at the extreme right end and another point load of 900 kN at 8 m from the left end. It also has a distributed load of 159 kN/m over its entire length. Calculate the support reactions. left support = 3275.7 kN; right support = 3471.3 kN (Ans.)
The inverted T-beam supports three concentrated loads as shown in the fig?ure. Find the maximum allowable value of P if the bending stresses are not to exceed 3.5 ksi in tension and 8 ksi in compression. Show: A. Complete process B. free body diagram C. Shear diagram D. Bending moment diagram
Q1 A simply supported beam of 6m length the Span has two concentrated loads of 8 KN and 10 KN at 2m and 4m from left hand supports. Find the reactions at two supports?
For the beam and loading shown, use discontinuity functions to compute(a) the slope of the beam at C (positive if counterclockwise and negative if clockwise).(b) the deflection of the beam at C.Assume LAB = 210 mm, LBC = 140 mm, LCD = 120 mm, LDE = 260 mm, MB = 200 N-m, P = 1080 N and a constant value of EI = 590 × 106 N-mm2 for the beam.
0O REDMI NOTE 8 PRO O AI QUAD CAMERA Q-1. For the overhanging beam below; if the force (F) is equal to 400 lb: Draw the Free Body Diagram (FBD) & Calculate the Support Reactions. b. Draw the Shear Force & Bending Moment Diagrams and Calculate the Maximum Values of BOTH. a. w = 40 lb/in 4 ft 10 ft
A square footing 2.4 m x 0.34 m thick supports a 300 mm square column at its center. Column loads are service conditions: DL = 380 kN LL = 229 kN f’c = 21 MPa fy = 415 MPa Concrete cover to the centroid of steel reinforcement = 100 mm Calculate the maximum ultimate bending moment in the slab. Write your final answer as whole number with the unit of kN-m.
Figure 1 below shows a 5 m length of beam with a pinned support at A and roller support at E. The beam carries three concentrated loads of 10 kN, 5 kN and 15 kN at B, C and D, respectively. а. Show the Free Body Diagram (FBD) of the beam then determine the reaction force. b. Calculate the shear force, V. Draw Shear Force Diagram (SFD). Calculate the bending moment, M. Draw the Bending Moment Diagram (BMD). 10 kN 5 kN 15 kN A E B C D 1m 1m 1 m 2 m Figure 1 C.