,A cylindrical disk of wood weighing 50.0 [N] and having a diameter of 25. 0 [cm] floats on a liquid of density p = 0.750 [g/cm³). The cylinder of liquid is 60.0 [cm] high and has a diameter that is the same as that of the wood. What is the gauge pressure halfway down the liquid? A. For your science exhibit, you want to make a block of wood float at the Oil interface between a layer of oil of unknown density Pl and water (Pwater = 1000 [kg/m³) inside a container as shown. The density of the wood is Pwood 800 [kg/m). What must be the density of the oil so that only 30. 0% of the wood is submerged in water? wood water C. right. The radii of the pipe at points 1 and 2 are 0.500 [m] and 1. 50 [m] respectively. The volume flow rate through the pipeline is 2.50 [L/s] If the pressure at point 1 in the pipe is 200 [kPa], what is the pressure at point 2, located 5.00 [m] above point 1? Water is flowing through a pipeline shown on the 2 5.00 (m) B.

,A cylindrical disk of wood weighing 50.0 [N] and having a diameter of 25. 0 [cm] floats on a liquid of density p = 0.750 [g/cm³). The cylinder of liquid is 60.0 [cm] high and has a diameter that is the same as that of the wood. What is the gauge pressure halfway down the liquid? A. For your science exhibit, you want to make a block of wood float at the Oil interface between a layer of oil of unknown density Pl and water (Pwater = 1000 [kg/m³) inside a container as shown. The density of the wood is Pwood 800 [kg/m). What must be the density of the oil so that only 30. 0% of the wood is submerged in water? wood water C. right. The radii of the pipe at points 1 and 2 are 0.500 [m] and 1. 50 [m] respectively. The volume flow rate through the pipeline is 2.50 [L/s] If the pressure at point 1 in the pipe is 200 [kPa], what is the pressure at point 2, located 5.00 [m] above point 1? Water is flowing through a pipeline shown on the 2 5.00 (m) B.

Name: ,A cylindrical disk of wood weighing 50. 0 [N] and having a diameter
Uploaded: 2024-03-20T06:51:10.000Z
Channel: Bartleby
Description: ,A cylindrical disk of wood weighing 50. 0 [N] and having a diameter of 25. 0 [cm] floats on aА.liquid of density p = 0.750 [g/cm³]. The cylinder of liquid is 60.0 [cm] high and has a diameter that isthe same as that of the wood. What is the gauge p

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter15: Fluid Mechanics

Section: Chapter Questions

Problem 20P: A tank with a flat bottom of area A and vertical sides is filled to a depth h with water. The...

See similar textbooks

Similar questions

. A juniper-wood plank measuring 0.25 ft by 1 ft by 16 ft is totally submerged in water, (a) What is its weight? (b) What is the buoyant force acting on it? (c) What is the size and the direction of the net force on it?
In an immersion measurement of a woman's density, she is found to have a mass of 62.0 kg in air and an apparent mass of 0.0850 kg when completely submerged with lungs empty. (a) What mass of water does she displace? (b) What is her volume? (c) Calculate her density. (d) If her lung capacity is 1.75 L is she able to float without treading water with her lungs filled with air?
(a) What is the fluid speed in a fire hose with a 9.00-cm diameter carrying 80.0 L of water per second? (b) What is the flow rate in cubic meters per second? (c) Would your answers be different if salt water replaced the fresh water in the fire hose?
A rock with a mass of 540 g in air is found to have an apparent mass of 342 g when submerged in water. (a) What mass of water is displaced? (b) What is the volume of the rock? (c) What is its average density? Is this consistent with the value for granite?
(a) What is the density of a woman who floats in freshwater with 4.00% of her volume above the surface? This could be measured by placing her in a tank with marks on the side to measure how much water she displaces when floating and when held under water (briefly). (b) What percent of her volume is above the surface when she floats in seawater?
A tank with a flat bottom of area A and vertical sides is filled to a depth h with water. The pressure is P0 at the top surface. (a) What is the absolute pressure at the bottom of the tank? (b) Suppose an object of mass M and density less than the density of water is placed into the tank and floats. No water overflows. What is the resulting increase in pressure at the bottom of the tank?
The gravitational force exerted on a solid object is 5.00 N. When the object is suspended from a spring scale and submerged in water, the scale reads 3.50 N (Fig. P15.24). Find the density of the object. Figure P15.24 Problems 24 and 25.
Water is moving at a velocity of 2.00 m/s through a hose with an internal diameter of 1.60 cm. (a) What is the flow rate in liters per second? (b) The fluid velocity in this hose's nozzle is 15.0 m/s. What is the nozzle's inside diameter?
A spherical weather balloon is filled with hydrogen until its radius is 3.00 m. Its total mass including the instruments it carries is 15.0 kg. (a) Find the buoyant force acting on the balloon, assuming the density of air is 1.29 kg/m3. (b) What is the net force acting on the balloon and its instruments after the balloon is released from the ground? (c) Why does the radius of the balloon tend to increase as it rises to higher altitude?
A spherical submersible 2.00 m in radius, armed with multiple cameras, descends under water in a region of the Atlantic Ocean known for shipwrecks and finds its first shipwreck at a depth of 1.75 103 m. Seawater has density 1.03 103 kg/m3, and the air pressure at the oceans surface is 1.013 105 Pa. a. What is the absolute pressure at the depth of the shipwreck? b. What is the buoyant force on the submersible at the depth of the shipwreck?
A man of mass m = 70.0 kg and having a density of = 1 050 kg/m3 (while holding his breath) is completely submerged in water, (a) Write Newtons second law for this situation in terms of the mans mass m, the density of water , his volume V, and g. Neglect any viscous drag of the water, (b) Substitute m = V into Newtons second law and solve for the acceleration a, canceling common factors, (c) Calculate the numeric value of the mans acceleration, (d) How long does it take the man to sink 8.00 m to the bottom of the lake?
Show that the Reynolds number NRis unitless by substituting units for all the quantities in its definition and cancelling.