A dirigible is tethered by a cable attached toits cabin at B. If the tension in the cable is1040 N, replace the force exerted by the cableat B with an equivalent system formed by twoparallel forces applied at A and C.AB6.7 m '4 m60°D To keep a door closed, a wooden stick iswedged between the floor and the doorknob.The stick exerts at B a 175-N force directedalong line AB. Replace that force with anequivalent force-couple system at C.y750 mm67 mm1850 mmB990 mmA594 mm100 mm

Answered: Image /qna-images/answer/f3677474-cb5f-4105-9751-04c1fb12a208.jpg

A dirigible is tethered by a cable attached to its cabin at B. If the tension in the cable is 1040 N, replace the force exerted by the cable at B with an equivalent system formed by two parallel forces applied at A and C.

A dirigible is tethered by a cable attached to its cabin at B. If the tension in the cable is 1040 N, replace the force exerted by the cable at B with an equivalent system formed by two parallel forces applied at A and C.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter6: Beams And Cables

Section: Chapter Questions

Problem 6.85P: Cable ABC of length 5 m supports the force W at B. Determine (a) the angles 1 and 2; and (b) the...

See similar textbooks

Related questions

Q: Replace the loading on the frame by a single resultant force. Suppose that Fi = 250 lb , F2 = 90 lb…

A: Given data as per question F1 =250 lb F2 = 90 lb M =500 lb. ft considering horizontal forces as…

Q: 5. The man exerts a force P of magnitude 50 lb on the handles of the wheelbarrow. Knowing that the…

A: Given: To determine W.

Q: The boom OA carries a load P and is supported by two cables as shown. Knowing that the tension is…

A: Tension in cable AB = 650 N Tension in cable AC = 825 N

Q: frictionless ring at B. Knowing that the tension in the cable is 385 N, determine the magnitude and…

Q: Four signs are mounted on a frame spanning a highway, and the magnitudes of the horizontal wind…

A: Determine the magnitude and the point of application of the resultant of the four wind forces: Let…

Q: A 10-H boom is acted upon by the 50 - lb force shown. Determine the tension in each cable.

A: Write the position vector of point B and C, Write the unit vector from B to D.

Q: Two horses on opposite banks of a canal pull a barge moving parallel to the banks by means of two…

Q: NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to…

A: Given dataA=195 NB=170 NC=255 NFind α angle for Resultant of 3 forcesto be horizontal (ie θ=0)α=?

Q: A horizontal beam weighing 300 N is attached to a wall. It is supported by a cable which makes an…

Q: Find the tension exerted by each cord as shown below.

Q: Determine the magnitude T of the tension in the supporting cable for the jib crane shown. The beam…

Q: Problem-4 Knowing that the tension is 510 lb in cable AB and 425 lb in cable AC, determine the…

Q: The member is supported by a pin at A and cable BC. Suppose that r = 3.5 m and the cylinder has a…

A: Consider the free body diagram of the given system as shown below. Here,

Q: The crane BC shown below lifts a load of W. Neglecting the weight of the crane. Determine the…

Q: 4. A cylinder weighing 400lb is held against a smooth incline by means of of a weightless rod AB.…

Q: Two cables are tied together at C and are loaded as shown. Determine the tension (a) in cable AC,…

A: Given condition : Let''T1'' be the tension in rope''BC'' and ''T2'' be the tension in the cable…

Q: 4. A dirigible is tethered by a cable attached to its cabin at B. If the tension in the cable is…

Q: 3.78 The 200-kg slider at A is held in place on the smooth vertical bar by the cable AB. (a)…

Q: Knowing that the tension in cable AC is 280 lb, determine (a) the angle between cable AC and the…

A: The tension in the cable AC is TAC = 280 lb. Write the coordinates,…

Q: 3. A 3500 lb motor and plate, as shown, are in equilibrium and supported by three cables and d = 4…

Q: Forces A, B and C are coplanar and act at a point. Force A is 12 kN at 90 degrees, B is 5 kN at 180…

Q: Determine (a) the required tension in cable AC, knowing that the resultant of the three forces…

A: In given figure: At the point c three force is exerted 200 N ,300N , and force of boom BC ,…

Q: Knowing that the tension is 510 lb in cable AB and 425 lb in cable AC, determine the inagnitude and…

A: Given information: Tension in the cables (T1) = 510 lb; T2 = 425 lb From the given figure we can…

Q: Cable AC exerts on beam AB a force P directed along line AC. Knowing that P must have a 350-lb…

A: As per given question We have to determine the magnitude of the force P and its horizontal…

Q: Urgent. Determine the components (Mx, My, Mz) of the moment that the force F will create at point O…

Q: 4. A cylinder weighing 400lb is held against a smooth incline by means of of a weightless rod AB.…

Q: is 725 N, determine the re

A: given:

Q: A disabled car is pulled by means of two ropes acting in the same plane. The tension in rope AB is 3…

A: Given: The magnitude of the tension in rope AB is TAB=3 kN. The magnitude of the resultant force is…

Q: Knowing that the tension in cable AC is 300 lb, determine the smallest angle between cable AC and…

Q: couple system, with the force acting at point O, that is equivalent to the force and couple acting…

A: Given: ABCD lies on vertical plane i.e. inclined 40 degree to yz plane CD makes angle 30 degree…

Q: Four signs are mounted on a frame spanning a highway, and the magnitudes of the horizontal wind…

A: required the magnitude and the point of application of the resultant of the four wind forces when a=…

Q: 3.116 A 160-N motor is mounted on the floor. Find the resultant of the weight and the forces exerted…

A: Given data Weight of motor = 160N Forces acting on motor are 700N, 300N

Q: Three cables are connected at A, where the force P is applied as shown. Determine the tension each…

A: Consider the diagram shown below for the given system.

Q: The bars AB and BC of the frame shown are each of length L and connected by a pin at B in addition…

Q: Ropes AB and AC are thrown to a boater whose canoe had capsized. Knowing that a = 25° and that the…

Q: Determine completely the resultant of the forces acting on the step pulley shown below.

Q: A hexagonal plate is acted upon by the force P and the couple shown. Determine the magnitude and the…

A: Given Applied load = 300 N To find Magnitude of P Angle of P

Q: Knowing that the tension in cable BC is 750N, determine the resultant of the three forces exerted at…

Q: The weights of two children sitting on ends A and B of a seesaw are 84 lb and 64 lb, respectively.…

Q: 4. Find the forces at points A and B of the landing gear shown. トーがート

Q: he forces acting on the bob of the pendulum are its weight (W = 2 N) and the tension T in the cord.…

A: Given a pendulum bob, The forces acting on the bob of the pendulum are its weight (W = 2 N) and the…

Q: Replace the wrench shown with an equivalent system consisting of two forces perpendicular to the y…

A: Forces acting in x direction are Ax+Bx=0Bx=-Ax⋯⋯⋯⋯⋯(I) Forces acting in z direction are…

Q: Two bolts at A and B are used to move the trunk of a fallen tree. Replace the forces exerted by the…

A: Given Data Force acting in AC is: FAC=1650 N Force acting in BD is: FBD=1500 N Coordinate of A is…

Q: Knowing that the tension in cable ‘BC’ is 764 N, determine the resultant of the three forces exerted…

Q: The force-couple system shown acts on a trapezoidal plate. a. Determine the value of M1 if the…

Q: 4. The block shown is acted on by its weight W = 400 lb, a horizontal force F = 600 lb, and the…

A: The vector sum of two or more vectors is the outcome. It's the outcome of combining two or more…

Question

A dirigible is tethered by a cable attached to
its cabin at B. If the tension in the cable is
1040 N, replace the force exerted by the cable
at B with an equivalent system formed by two
parallel forces applied at A and C.
A
B
6.7 m '4 m
60°
D

To keep a door closed, a wooden stick is
wedged between the floor and the doorknob.
The stick exerts at B a 175-N force directed
along line AB. Replace that force with an
equivalent force-couple system at C.
y
750 mm
67 mm
1850 mm
B
990 mm
A
594 mm
100 mm

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A couple acting on the winch at G slowly raises the load W by means of a rope that runs around the pulleys attached to the derrick at A and B. Determine the forces in members EF and KL of the derrick, assuming the diameters of the pulleys and the winch are negligible.
The 3200-1b weight is supported by two cables. Knowing that the resultant of the cable tensions T1 and T2 is a vertical 3200-lb force, determine T1 and T2.
Cable ABC of length 5 m supports the force W at B. Determine (a) the angles 1 and 2; and (b) the force in each cable segment in terms of W.
An 8-m long cantilever beam is loaded with vertical forces A = 60 kN and B = 108 kN, separated by a distance d = 5.6 m, as shown. Replace the two forces with a single equivalent force R and determine the distance x-bar (x¯) from the left end of the beam to the line of action of R.
A horizontal beam weighing 300 N is attached to a wall. It is supported by a cable which makes an angle of 300 with the horizontal beam. If a 60.0 kg block is placed 3.00 m from the wall, determine (a) the tension in the cable and (b) the horizontal and vertical components of the force exerted by the beam at point O.
A dirigible is tethered by a cable attached to its cabin at B. If the tension in the cable is 1040 N, replace the force exerted by the cable at B with an equivalent system formed by two parallel forces applied at A and C.
Determinethe magnitude (lb) of the horizontal component of force at point C if P = 150.5 lb, x = 13.6 in, y = 6.8 in, and z = 8.3 in.
The force P has a magnitude of 250 N and is applied at the end C of a 500-mm rod AC attached to a bracket at A and B. Assuming α =30° and β=60°, replace P with (a) an equivalent force-couple system at B, (b) an equivalent system formed by two parallel forces applied at A and B.
A tower guy wire is anchored by means of a bolt at A. The tension in the wire is 2500 N. Determine (a) the components Fx, Fy, and Fz of the force acting on the bolt and (b) the angles θx, θy, and θz defining the direction of the force.
Pulleys A and B are mounted on bracket CDEF The tension on each side of the two belts is as shown. Replace the four forces with a single equivalent force, and determine where its line of action intersects the bottom edge of the bracket.
A 175-kg utility pole is used to support at C the end of an electric wire. The tension in the wire is 600 N, and the wire forms an angle of 15° with the horizontal at C . Determine the largest and smallest allowable tensions in the guy cable BD if the magnitude of the couple at A may not exceed 500 N·m.
Determine the magnitude T of the tension in the supporting cable for the jib crane shown. The beam AB is a standard 0.5 meter l-beam weighing 5.5 kN.