A disel station has an overalleffeiecny is 0.25. The fuel calorific value is 7000 k.calorific /kg. The fuel consumption in * kg/kwh is 0.7645 0.4914 0.8432 0.3875 non of them hydro station of 3 MW generate 358 Mwh For one week. If the water discharge at one week is 542000 cubic meter. The overal ffieciency of the station is 0.7. The head of the water in the dan is 276.43 m 76.39 m

A disel station has an overalleffeiecny is 0.25. The fuel calorific value is 7000 k.calorific /kg. The fuel consumption in * kg/kwh is 0.7645 0.4914 0.8432 0.3875 non of them hydro station of 3 MW generate 358 Mwh For one week. If the water discharge at one week is 542000 cubic meter. The overal ffieciency of the station is 0.7. The head of the water in the dan is 276.43 m 76.39 m

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Question 2 A hydro-electric power station has a reservoir area of 3,8-km2 and a capacity of 9,9 x 106 m3 . The effective head of water is 100 metres. The penstock, turbine and generation efficiencies are 95%, 90%, and 85%, respectively. 2.1 Determine the overall efficiency of the power station (%) and determine the total electrical energy that can be generated from the power station (kWh). 2.2 Determine the depth of the reservoir (metres) 2.3Determine the fall in reservoir volume level is the load of 100 kW is supplied for 5 hours (%).
A turbine is used to extract energy from water at a discharge of 1.5 cfs. If turbine head is ℎ? = 9ft and turbine efficiency η = 75 %, determine the effective output power in HP (horsepower)
A pumped storage power plant with a head of 150 m, with a flow rate of 6 cms for power generation and pumping, and continuous operation for 8 hours each time. Try to find (1) the power output during power generation and the total daily power generation; (2) pumping water Hourly power and total daily power demand; (3) Pumped storage power plant efficiency; (4) Adjust the pool capacity? Assuming that the water loss is 8% of the total drop, the combined efficiency of the turbine and generator is 85%, and the efficiency of the pump is 65%.
A group of engineers is designing a new hydroturbine by scaling up an existing one. The existing turbine (turbine A) has diameter DA = 1.50 m, and spins at n.A = 150 rpm. At its best efficiency point, V.A = 162 m3 /s, HA = 90.0 m of water, and bhpA = 132 MW. The new turbine (turbine B) will spin at 120 rpm, and its net head will be HB = 110 m. Calculate the diameter of the new turbine such that it operates most efficiently, and calculate V.B and bhpB.
A pump is to deliver 240 US Quarts per minute of water with a discharge pressure of 150 psig Suction pressure indicates a 5 in Hg vacuum. The diameter of the suction and the discharge are 14cm and 4in respectively. The pump has an efficiency of 70%, Determine the A.) Water horsepower of the pump B.) BP of the motor (hp)
A group of engineers is designing a new hydroturbine by scaling up an existing one. The existing turbine (turbine A) has diameter DA = 1.50 m, and spins at n.A = 150 rpm. At its best efficiency point, V.A = 162 m3 /s, HA = 90.0 m of water, and bhpA = 132 MW. The new turbine (turbine B) will spin at 120 rpm, and its net head will be HB = 110 m. Calculate and compare the efficiency of the two turbines. They should be the same since we are assuming dynamic similarity. However, the larger turbine will actually be slightly more efficient than the smaller turbine. Use the Moody efficiency correction equation to predict the actual expected efficiency of the new turbine. Discuss.
Read the question carefully and give me right solution according to the question. A certain 15-Kw pump running at 1600 rpm has an inlet diameter of 20cm and the discharge line is 12 cm in diameter. The output from th pump is 2800 liters/min of 20C and the centerline of the pump discharge is 1.5 meter above the centerline of the intake pipe. Determine the efficiency of pump.
A pump with an overall efficiency of 60% is pumping an acid (p= 1800kg/m3) from an open tank (atmospheric pressure) to a reactor unit at the rate of (8 square root 8) kg/s. This unit operates at 8000 Pa gauge and the acid is discharged into it with a velocity of 0.24 m/s at a point 6m above the acid surface level in the tank. Determine the power required (kW) to run the pump if the sum of the major and minor energy losses are equivalent to 3m of H2O head.
A hydroelectric plant has 14 identical Francis turbines, a gross head of 245 m, and a volume flow rate of 11.5 m3 /s through each turbine. The water is at 25°C. The efficiencies are ?turbine = 95.9%, ?generator = 94.2%, and ?other = 95.6%, where ?other accounts for all other mechanical energy losses. Estimate the electrical power production from this plant in MW
D=6.1 mmdetermine flow rate in l/s
Pump efficiency= 97%Pump speed= 1848 rpmPump discharge= 172L/s of water to a height at 61 m.Determine the power output in kW
fan ventilates at 500rev/min, the airflow is measyured at 150cubic meters/second. the ventilation pressure is 0.40kPa while thepressure along fan is0.85kPa.the mine requires 100cubic meters/second of air flow on an off day.efficiency=0.75. 1.new slow down speed required on an off day 2. Annual savings in electricty if the costs is R0.63/kWh 3. Comment on any savings in the maximum demand. 4. methods for reduction of speed on off-day.