A ferromagnetic core with a relative permeability of 1500 is shown in the Figure. The dimensions are shown in the diagram, and the depth of the core is 5cm. The air gaps on the left and right sides of the core are 0.050 and 0.070 cm, respectively. Because of the fringing effects, the effective area of the air gaps is 5 percent larger than their physical size. If there are 300 turns in the coil wrapped around the center leg of the core and if the current in the coil is 1.0 A, what are the flux values for the left, center, and right legs of the core? What is the magnetic field in each air gap? 7 cm 7 cm 7 cm 30 cm- 30 cm 7 cm 30 cm 0.07 cm 300 turns 0.05 cm - 7 cm Core depth = 5 cm

A ferromagnetic core with a relative permeability of 1500 is shown in the Figure. The dimensions are shown in the diagram, and the depth of the core is 5cm. The air gaps on the left and right sides of the core are 0.050 and 0.070 cm, respectively. Because of the fringing effects, the effective area of the air gaps is 5 percent larger than their physical size. If there are 300 turns in the coil wrapped around the center leg of the core and if the current in the coil is 1.0 A, what are the flux values for the left, center, and right legs of the core? What is the magnetic field in each air gap? 7 cm 7 cm 7 cm 30 cm- 30 cm 7 cm 30 cm 0.07 cm 300 turns 0.05 cm - 7 cm Core depth = 5 cm

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter25: Surge, Spike, And Lightning Protection

Section: Chapter Questions

Problem 10RQ: In reference to the load, how are capacitors connected to help prevent voltage spikes and surges?...

See similar textbooks

Similar questions

What are interpoles, and what is their purpose?
A ferromagnetic core with a relative permeability of 1500 is shown in the following figure. The depth of the core is 5 cm. Because of fringing effects, the effective area of the air gaps is 5 percent larger than their physical size. If there are 300 turns in the coil wrapped around the center leg of the core, and if the current in the coil is 1.25 A, find the magnetic flux and the field density in all three legs of the core, as well as the magnetic flux and flux density in the two air gaps.
Find the inductance per unit length of a very long solenoid with a unit length of N windings. The permeability of the core is μ.
As seen in Figure-2, the potential on an infinitely wide conductor plane measured. A point load of -3C was placed at (-5.6) and a point load of 4C was placed at (6.8) point. (-2,2) Calculate the potential value and the electric field created at the point. The energy stored in the system calculate. suvject is elctromagnetic field theory.
The figure is a cross section through three long wires with linear mass density 58.0 g/m. They each carry equal currents in the directions shown. The lower two wires are 4.0 cm apart and are attached to a table. What current I will allow the upper wire to "float" so as to form an equilateral triangle with the lower wires?
A cylindrical long solenoid of length 2000 mm has 20 mm diameter. If number of turns wounded on solenoid is 2000 turns what is value of inductance.
The figure shows a piece of wire curved in empty space with its left side half-circle and its linear parts assumed to be long enough. Determine the magnetic induction at point M if a constant I current flows through this conductor.
An ideal core (assume relative permability is infinity) with a crossectional area of 12 cm2is excited via10A current flowing through coil with 200 turns. On the one side of the coil, a 1 cm long paramagneticmaterial (µr=1) is placed. Calculate the magnetic field on paramagnetic material
the depth of the solid core is 5 cm. Assume that the relative permeability of the core is 1000 and remains constant and that the current in the coll is 4 A. ignore the fringing effects at the air gap and find the following
An ideal core (assume relative permability is infinity) with a crossectional area of 12 cm2is excited via 10A current flowing through coil with 200 turns. On the one side of the coil, a 1 cm long paramagnetic material (µr=1) is placed. Calculate the magnetic field on paramagnetic material
For the circuit shown in Figure:a. Determine the reluctance values and show themagnetic circuit, assuming that μ = 3,000μ0.b. Determine the inductance of the device.c. The inductance of the device can be modified bycutting an air gap in the magnetic structure. If a gapof 0.1 mm is cut in the arm of length l3, what is thenew value of inductance?d. As the gap is increased in size (length), what is thelimiting value of inductance? Neglect leakage fluxand fringing effects.
Find the capacitance in picofarad between inner and outer curved conductor surfaces shown in the figure containing two dielectrics, εr1 = 4.9 and εr2 = 3.5. Here r1 = 39.4 mm, r2 = 64.4 mm, α1 = 19.7 degrees, α2 = 41.2 degrees and L = 158.6 mm.