A fixed crane has a mass of 1000 kg and is used to lift a 2400 kg crate. It is held in place by a pin at A and a rocker at B as shown2400 kg1.5 mB2 m→-4 mWhat are the components of the Tension Vector (T), which is used to represent the weight of the crateT = T,i – Tyj(Answer in Kilo Newtons)TyChoose...Choose.. +

A fixed crane has a mass of 1000 kg and is used to lift a 2400 kg crate. It is held in place by a pin at A and a rocker at B as shown 2400 kg 1.5 m 2 m-- 4 m What are the components of the Tension Vector (T), which is used to represent the weight of the crate

A fixed crane has a mass of 1000 kg and is used to lift a 2400 kg crate. It is held in place by a pin at A and a rocker at B as shown 2400 kg 1.5 m 2 m-- 4 m What are the components of the Tension Vector (T), which is used to represent the weight of the crate

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.78P: The figure shows a steel bar being processed by a rolling mill. Given that P=80kN and r =0.016,...

See similar textbooks

Related questions

Q: 2. For the frame shown, calculate the reactions at A and B. 240 lb 90 Ib/ft 30 Ib/ft A 20 ft 20 ft…

Q: The spring of the mechanism works under tension and at the same moment it exerts a tension force of…

Q: Ball A with mass of 10 kg rests on a smooth 30° slope supported by cables AB and AC. Determine the…

Q: In a ship-unloading operation, a 3500-lb automobile is supported by a cable. A worker ties a rope to…

A: Draw the free body diagram at point A. Here, TAB is the tension in the cable AB and TAC is the…

Q: 4.33 The 1200-kg car is being lowered slowly onto the dock using the hoist A and winch C. Determine…

A: Draw the free body diagram of the given arrangement: θ1=tan-12.45.6=23.2°θ2=tan-12.25.6=21.45°…

Q: Q: Body A weights 80 lb and body B weight 100 lb and they are connected by cable and equilibrium.…

A: Given:mass of Body A(mA)=80 lbmass of body B (mB)=100 lbα+β+120°=180°α+β=60°To find :- α and β

Q: A smooth, homogeneous sphere is held ar rest by the two inclines as shown. Determine the reactions…

Q: The cylinder shown is homogeneous and has a mass of 30 kg. If slipping of the cylinder is prevented…

A: Draw the free body diagram for the above problem.

Q: A 25 kg crate is suspended at B while a crate of mass "m" is suspected at C as shown in the figure.…

Q: 4. Determine the tension in the cable at B, given that the uniform cylinder weighs 350 lb. Neglect…

Q: 1. A boy stands out at the end of the diving board, which is supported by two springs A and B, each…

Q: 3- Determine the force in each cable needed to support the 800-lb load. D 8 ft 6 ft 6 ft A.

A: From the equilibrium of forces : FBC+FAC+FCD-800k=0…

Q: A 600-lb crate is supported by several rope-and-pulley arrangements as shown. Determine for each…

A: Given data: The weight of the crate is W=600 lb. The free body diagram for the pully a is:…

Q: Determine the contact force between the smooth 90-kg ball B and the horizontal bar, and the…

A: Given, m = Mass of the ball = 90 Kg Free body diagram of the ball where, T is the tension in the…

Q: The 75-kg cylinder A is supported by a malleable cable C at 200 and a smooth surface. Determine all…

Q: A container of mass m = 120 kg is supported by three cables as shown. Draw the free-body diagram…

A: To determine the tension in each cable, take all forces on point A and draw free body diagram

Q: A fixed crane has a mass of 1000 kg and is used to lift a 2400 kg crate. It is held in place by a…

A: Given: The mass of crane = 1000 kg The mass of crate = 2400 kg…

Q: 1. A Christmas decoration consists of three identical balls, each with a mass of 0.15 kg. It was…

Q: The 60-lb homogeneous disk is suspended from a belt that runs from B to C. The spring OA holds the…

A: Free body diagram of disc

Q: Determine the magnitude of the pin force at A. Assume W = 525 lb, a = 3.1 ft, b = 2.4 ft, r = 7 in.…

Q: the 75-kg cylinder A is supported by a flexible cable C at 200 and a smooth plane. Determine all…

Q: 1) A mass of 100 kg is applied on the 50 kg uniform beam at point C as shown. If the pulley at D is…

A: When a body is in static equilibrium, the net external force acting on the body is equal to zero.…

Q: While slowly walking, a man having a total mass M places all his weight on one foot. Assuming that…

Q: Four balls of equal radii form a pyramid supported by a smooth horizontal plane surface. The three…

A: Given: There are four balls of equal radius. So let the radius of each ball is r From the symmetry…

Q: A crate of 30 kg hangs as shown. Fixed support at A. If the cable BC has a tension of 20 N determine…

Q: A fixed crane has a mass of 1000 kg and is used to lift a 2400 kg crate. It is held in place by a…

Q: 3/4 The 20-kg homogeneous smooth sphere rests on the two inclines as shown. Determine the contact…

Q: The assembly shown has the dinensions given above. When a force of F 220 ib is applied, find the…

Q: Determine the tensionin the cable and the reaction ateach pair of wheels.

A: Given: To Determine: The tension in the cable The reaction at each pair of wheels

Q: An escalator is driven by a chain connected to point A that supports a force F. The rollers at…

Q: Painters A and B support themselves and the 1 0-kg uniform plank CD by pulling down on the two…

Q: a 120 Kg car is being lowered slowly unto the dock usig the hoist A and winch C determine the force…

A: ques-2 GIVEN: WEIGHT OF CAR=120kg car is lowered using hoist A and winch C, free body diagram,…

Q: a b c 5 4 1 in d 2 in h 1.5 ft The assembly shown has the dimensions given above. When a force of F…

Q: A fixed crane has a mass of 1000 kg and is used to lift a 2400 kg crate. It is held in place by a…

Q: The 2kg member is supported by the pin and bracket at A and a cable at B as shown. Cable EBD passes…

Q: Determine all the cable tensions and the mass of block E of the system shown below. Use the vector…

Q: 1. Determine the force P required to maintain the 200-kg engine in the position for which 0 = 30°.T…

A: Given data: The given mass is M = 200 kg. From the geometry, ∠ABC=∠ACB…

Q: Determine the tension in the cable at B, given that the uniform cylinder weighs 350 lb. Neglect…

A: Draw the free body diagram of the cylinder. OC=3 ftcos 40°OC=2.3 ft ED=3 ftsin 50°ED=2.3 ft

Q: Determine the tension developed in cable AD required of the 75-kg cylinder.

Q: Bodies A and B are joined by a cord parallel to the inclined plane as shown. Under body A which…

Q: A fixed crane has a mass of 1000 kg and is used to lift a 2400 kg crate. It is held in place by a…

Q: Determine the force magnitude P required to lift one end of the 250-kg crate with the lever dolly as…

A: Given data Distance from application of force to fulcrum = 1500 mm Distance from fulcrum to weight =…

Q: Determine the tension in cables BA and BC necessary to support the 75-kg cylinder in the figure…

Q: The 52-kg cylinder is suspended from a clamping collar at C which can be positioned at any…

Q: Activity 1: The boom AB is supported in the position shown by a cable which runs over a small pulley…

Q: Block A has a mass of 4 kg and block 8 of 4 kg Neglecting the mass of the pulleys, find the tension…

Q: Knowing the tension in cable AC is 795 N, determine the components of the force exerted by the cable…

A: Given Data: The tension in the cable AC is TAC=795 N. The coordinate of point A is (-400, 450, 0).…

Concept explainers

Axial Load

When a bar of the uniform cross-section is acted by a load, such that the load acts along the longitudinal axis of the bar, such kinds of loadings are known as axial loadings. In general terms, a load is an external force acting on a component. An axial load acts perpendicular to the geometric cross-section of the component. Based on the direction of the application of the load, an axial load can be tensile or compressive. The analysis of bodies under the action of axial loads is generally studied under the branch of mechanics, known as statics.

Question

A fixed crane has a mass of 1000 kg and is used to lift a 2400 kg crate. It is held in place by a pin at A and a rocker at B as shown
2400 kg
1.5 m
B
2 m→-
4 m
What are the components of the Tension Vector (T), which is used to represent the weight of the crate
T = T,i – Tyj
(Answer in Kilo Newtons)
Ty
Choose...
Choose.. +

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

2. A 100 N force acts as shown on a 30.6 kg block placed on an inclined plane. The coefficients of friction between the block and the plane are µs = 0.25 and µk = 0.2. Determine whether the block is in equilibrium and find the value of the friction force.
4.00 kg block is attachedto a vertical rod by meansof two strings. When the systemrotates about the axis of the rod,the strings are extended as shownin Fig. and the tensionin the upper string is 80.0 N. (a)What is the tension in the lowercord? (b) How many revolutionsper minute does the system make?(c) Find the number of revolutionsper minute at which the lowercord just goes slack. (d) Explainwhat happens if the number ofrevolutions per minute is less thanthat in part (c).
A transmission tower is held by three guy wires attached to a pin at A and anchored by bolts at B, C, and D. If the tension in wire AB is 945 lb, determine the vertical force P exerted by the tower on the pin at A. y 25 ft 20 ft 100 ft B 60 ft C D 20 ft 18 ft 74 ft x The vertical force P exerted by the tower on the pin is 762.84 lb.
The system is made up of a bar, supported by a pin at point A and by a smooth collar at point B (the collar slides on the ABG bar). The collar is pinned to bar BDE, and bar BDE is supported by a pin at D and a cable at end E. Determine the force P such that the force in the cable equals to T. With T= 26 lb, a=4 in, b=9 in
Springs OA and OB are originally unstretched in a vertical position. Find the horizontal force, F, when the springs are held in the position as shown, given: k = 550 lb/ft, L1 = 0.6 ft, L2 = 1.3 ft
.A belt 200 mm wide and 7 mm thick drives a pulley at belt speed of 25 m/s. The density of the belt is 980 kg/m3 and the coefficient of friction between the belt and pulley is 0.23. Given that the angle of contact of pulley is 2π/3 and the allowable stress of the belt is 1.8 MPa, determine the tension on the slack side of the belt (T2) in N
1. Samer (ms = 75 kg) is sitting on the seat of a swing at the playground. The seat is supported by two cables, one on each side of the seat. (You may assume the seat has negligible mass.) A. Determine the tension in each cable due to Samer sitting on the swing seat. B. Given each cable has a diameter of 1 mm and each cable is exactly 5 m long before Samer sits on the seat, determine the length of each cable when Samer is sitting on the seat. (The cables are made of Aluminum for which Y = 70 GN/m°.) show all work in logical, detailed form and box in numerical answers. Include a diagram wherever possible. On any problem where an FBD is appropriate, it must be included for maximum credit. All numerical results should be stated to 3.00 or 4.000 significant figures and in mks units unless otherwise noted.
Mountaineersoften use a rope to lower themselvesdown the face of a cliff (this is called rappelling).They do this with their body nearly horizontaland their feet pushing against the cliff. Suppose that an 82.0 kg climber,who is 1.90 m tall and has a center of gravity1.1 m from his feet, rappels down a verticalcliff with his body raised 35.0° above the horizontal.He holds the rope 1.40 m from his feet,and it makes a 25.0° angle with the cliff face.(a) What tension does his rope need to support?(b) Find the horizontal and vertical componentsof the force that the cliff face exerts on theclimber’s feet. (c) What minimum coefficientof static friction is needed to prevent the climber’sfeet from slipping on the cliff face if he hasone foot at a time against the cliff?
Show complete solutions and figures The diameters of the two cylinders A and B in the figure shown are 80 mm and 750 mm, respectively. The face of the piston is 1.2 m above the face of the weight platform. The space in between the piston and the weight is filled with oil (s.g.=0.80). If F=75 N, Determine the following: the value of Wrequired to maintain equilibrium. a) 38.6 N b) 86.3 N c) 63.8N d) 83.6 N e) None
Nitrogen gas is confined in a cylinder and the pressure of the gas is maintained by a weight placed on the piston. The mass of the piston and the weight together is 100 kg. The acceleration due to gravity is 9.81 m/s2 and the atmospheric pressure is 1.01325 bar. Assume frictionless piston. Determine: (a) The force exerted by the atmosphere, the piston, and the weight on the gas if the piston is 200 mm in diameter. (b) The pressure of the gas. (c) If the gas is allowed to expand pushing up the piston and the weight by 500 mm, what is the work done by the gas in kJ? (d) What is the change in the potential energy of the piston and the weight after the expansion in part (c)?
A man on the wire singing "Man on a Wire" while practicing for his circus show has reached the center of the rope, creating a dip on the center angled at 63.2 degrees. If the mass of the man is 49.55 kg and the tension force that can be handled by the wire is 449.77N, would the wire break? Show the tension caused by the man hanging on the wire.
d=1.50m, cable doesnt stretch and length of it between the 2 springs is 1.80m, frictionless system. m is mass of hanging weight and mp is mass of pulley.