A flanged bolt coupling consists of six-10 mm diameter steel bolts evenly spaced around a bolt circle 300 mm in diameter and four-20 mm diameter aluminum bolts on a concentric bolt circle 200 mm diameter. What torque can be applied without exceeding a shearing stress of 60 MN/m. sq. in the steel or 40 MN/m. sq. in the aluminum? A. 9.75 N-cm B. 2.8 MN-mm C. 5.94 kN-m D. 4.5 GN-in

A flanged bolt coupling consists of six-10 mm diameter steel bolts evenly spaced around a bolt circle 300 mm in diameter and four-20 mm diameter aluminum bolts on a concentric bolt circle 200 mm diameter. What torque can be applied without exceeding a shearing stress of 60 MN/m. sq. in the steel or 40 MN/m. sq. in the aluminum? A. 9.75 N-cm B. 2.8 MN-mm C. 5.94 kN-m D. 4.5 GN-in

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A flange bolt coupling is used to connect a solid shaft 90 mm in diameter to a hollow shaft 100 mm in outside diameter and 90 mm in inside diameter. If the allowable shearing stress in the shafts and the bolts is 60 MN/m2, how many 10-mm diameter steel bolts must be used on a 200-mm diameter bolt circle so that the coupling will be as strong as the weaker shaft?
A flanged bolt coupling consists of ten 15-mm diameter bolts spaced evenly around abolt circle 350 ?? in diameter. Determine the torque capacity of the coupling if theallowable shearing stress in the bolts is 30 MPa.
A torque is to be carried by a flanged bolt coupling that consists of ten 16 mm- diameter steel bolts on a circle of diameter 400mm and eight 12mm-diameter steel bolts on a circle of diameter 250mm. a) Determine the torque if the shearing stress in the 12mm diameter bolts is 20MPa. b) How many 16mm diameter bolts should be added to increase the torque to 12 kN-m?
A flange bolt coupling consists of 12-14mm diameter steel bolts on a bolt circle 320mm in diameter and 8-12mm diameter on a concentric bolt circle 260mm in diameter. What torque can be applied without exceeding a shearing stress of 60MPa in the bolts? B) Determine the number of 10mm steel bolts that must be used on the 320mm bolt circle of the coupling to increase the torque capacity by 6KN-m.
A flange coupling is to be designed, using 6 bolts at a distance of 89 mm from the center of the shaft, allowable shearing stress on the bolt is 103 MPa. If the shaft is to transmit 4035hp at a speed of 1200 rpm, (a) determine the bolt diameter required in mm. (b) If the shaft is made of the same material as the bolt, determine the required diameter of the shaft in mm.
A hollow steel (G = 12,000 ksi) shaft has diameters of 6 in. and 4 in. and an allowable shearing stress of 9,000 psi. Determine the required number of 3⁄4-in diameter bolts for a flange coupling in which two-thirds of the bolts are on a 12-in diameter bolt circle and one-third are on a 9-in diameter circle. The allowable shearing stress in the bolts is 12,000 psi.
A flanged bolt coupling consists of six 12-mm diameter steel bolts evenly spaced around a bolt circle 300 mm in diameter, and four 25-mm diameter aluminum bolts on a concentric bolt circle 200 mm in diameter. What torque can be applied without exceeding a shearing stress of 60 MPa in the steel and 40 MPa in the aluminum? Use G of ateel = 83 GPa and G for aluminum = 28 GPa
A hollow steel (G = 12,000 ksi) shaft has diameters of 6 in. and 4 in. and an allowable shearing stress of 9,000 psi. Determine a. the horsepower transmitted at 25 rad/sec; b. the magnitude of the angle of twist in a length of 10 ft; and c. the required number of 3⁄4-in diameter bolts for a flange coupling in which two-thirds of the bolts are on a 12-in diameter bolt circle and one-third are on a 9-in diameter circle. The allowable shearing stress in the bolts is 12,000 psi.
A flanged bolt coupling consists of six - ½ inch steel bolts evenly spaced around a bolt circle of 12 inch in diameter, and four – ¾ inch aluminum bolts on a concentric bolt circle 8 inches in diameter. With an applied torque of 200 inches determine the max shearing stress in the aluminum and steel bolt. Use Gst = 12x10 6 psi and Gal = 4x106 psi
A flanged bolt coupling consists of eight steel 20-mm bolts spaced evenly around a bolt circle of 300mm in diameter. Determine the torque capacity of the coupling if the allowable shearing stress in the bolts is 40MPa
The solid rod AB has a diameter dAB5 60 mm and is made of a steel for which the allowable shearing stress is 85 MPa. The pipe CD, which has an outer diameter of 90 mm and a wall thickness of 6 mm, is made of an aluminum for which the allowable shearing stress is 54 MPa. Determine the largest torque T that can be applied at A
A pulley is connected to a power transmission shalt of diameter d by means of a rectangular sunk key of width w and length I. The width of the key is taken as d/4. For full power transmission, the shearing strength of the key is equal to the torsional shearing strength of the shal: The ratio of the length of the key to the diameter of the shaft (l/d) is