A flat bar of aluminum alloy 25 mm wide and 5 mm thick is placed between two steel bars each 25 mm wide and 10 mm thick to form a composite bar 25 mm x 25 mm as shown. The three bars are fastened together at their ends when the temperature is 15℃. Find the stress in each of the materials when the temperature of the whole assembly is raised to 55 ℃.Steel: Es = 200 GPa; Coefficient of expansion = 1.2x10^-5/℃.Aluminum: Eal = 200/3 GPa; Coefficient of expansion = 2.3x10-5/℃.

A flat bar of aluminum alloy 25 mm wide and 5 mm thick is placed between two steel bars each 25 mm wide and 10 mm thick to form a composite bar 25 mm x 25 mm as shown. The three bars are fastened together at their ends when the temperature is 15℃. Find the stress in each of the materials when the temperature of the whole assembly is raised to 55 ℃.Steel: Es = 200 GPa; Coefficient of expansion = 1.2x10^-5/℃.Aluminum: Eal = 200/3 GPa; Coefficient of expansion = 2.3x10-5/℃.

Materials Science And Engineering Properties

1st Edition

ISBN:9781111988609

Author:Charles Gilmore

Publisher:Charles Gilmore

Chapter8: Engineering Materials

Section: Chapter Questions

Problem 7CQ

See similar textbooks

Similar questions

Soln is required,
The steel and aluminum plate assembly is bolted together and fastened to the wall. Each plate has a constant width in the z direction of 200 mm and thickness of 20 mm. If the density of A and B is ρs = 7.85 Mg/m3, and for C,ρal = 2.71 Mg/m3, determine the location x̄ of the center of mass. Neglect the size of the bolts.
Provide at least five examples of objects/systems where either thermal stress is produced or thermal stress is avoided using expansion joints.
Distinction between the semisolid and the solid state.
A laminated [0/90/0/90]s graphite/epoxy beam is 1 mm thick, is 20 mm wide, and has 0.125 mm thick plies. The lamina properties are E1 = 180 GPa, E2 = 10 GPa, ν12 = 0.28, G12 = 7 GPa Xt = 1700 MPa, Xc = 1400 MPa, Yt = 40 MPa, Yc = 230 MPa (a) Determine the flexural modulus of the beam (b) How could the flexural modulus be improved without changing the ply materials, the number of plies, or the ply orientations? (c) Using the Maximum Stress Criterion for each ply, determine the magnitude of the maximum allowable bending moment that the beam can withstand. Which ply fails first?
what is the design strength? steel material The size of the hole = 22mm sectional area = 1650mm^2
Rotational stiffness
A uniform bar 1 is connected to a tapered rod 2. Both are subjected to axial loads as shown . If P = 7kN Determine the axial deformation of rapered rod 2 (in mm) Indicate negative sign if compression. Complete solution no rounding off.
Determine if the structure is deteminate, indeterminate or unstable.
If it is constrained between two supports A and B and is stress-free at 20 ℃, what would be the stress in the two materials when it is heated to 70 ℃, For Steel: Es = 210 GPa, Coefficient of expansion = 12x10^6/℃. For Brass: Eb = 105 GPa, Coefficient of expansion = 19x10^-6/℃
Value of P1=9 kNP2=105 kNP3=89 kNd=159 mm Strength of Materials