A flexible loop has a radius of 12.0 cm and is in a magnetic field of magnitude 0.150 T. The loop is grasped at opposite points along its diameter and pulled such that its area is almost zero. If it takes 0.200 s to close the loop, what is the magnitude of the induced emf in it during this time interval?

A flexible loop has a radius of 12.0 cm and is in a magnetic field of magnitude 0.150 T. The loop is grasped at opposite points along its diameter and pulled such that its area is almost zero. If it takes 0.200 s to close the loop, what is the magnitude of the induced emf in it during this time interval?

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter32: Faraday’s Law Of Induction

Section: Chapter Questions

Problem 5PQ

See similar textbooks

Similar questions

(a) A nonferrous screwdriver is being used in a 2.00 T magnetic field. What maximum emf can be induced along its 12.0 cm length when it moves at 6.00 m/s? (b) Is it likely that this emf will have any consequences or even be noticed?
When a magnetic field is first turned on, t1 flux through a 20-turn loop varies with time according to m=5.0t22.0t ,where m is in milliwebers, tis in seconds, and the loop is in the plane of the page with the unit normal pointing outward. (a) What is the emf induced in the loop as a function of time? What is the direction of the induced current at (b) t= 0, (c) 0.10, (d) 1.0, and (e) 2.0 s?
A 2.00-m length of wire is held in an eastwest direction and moves horizontally to the north with a speed of 0.500 m/s. The Earths magnetic field in this region is of magnitude 50.0 T and is directed northward and 53.0 below the horizontal. (a) Calculate the magnitude of the induced emf between the ends of the wire and (b) determine which end is positive.
(a) An MRI technician moves his hand from a region of very low magnetic field strength into an MRI scanner's 2.00 T field with his fingers pointing in the direction of the field. Find the average emf induced in his wedding ling, given its diameter is 2.20 cm and assuming it takes 0.250 s to move it into the field. (b) Discuss whether this current would significantly change the temperature of the ring.
A truck is carrying a steel beam of length 15.0 in on a freeway. An accident causes the beam to be dumped off the truck and slide horizontally along the ground at a speed of 25.0 m/s. The velocity of the center of mass of the beam is northward while the length of the beam maintains an east-west orientation. The vertical component of the Earths magnetic field at this location has a magnitude of 35.0 T. What is the magnitude of the induced emf between the ends of the beam?
In a 250-turn automobile alternator, the magnetic flux in each turn is B, = 2.50 104 cos t, where is in webers, is the angular speed of the alternator, and t is in seconds. The alternator is geared to rotate three times for each engine revolution. When the engine is running at an angular speed of 1.00 103 rev/min, determine (a) the induced emf in the alternator as a function of time and (b) the maximum emf in the alternator.
A metal bar of length 25 cm is placed perpendicular to a uniform magnetic field of strength 3 T. (a) Determine the induced emf between the ends of the rod when it is not moving, (b) Determine the emf when the rod is moving perpendicular to its Length and magnetic field with a speed of 50 cm/s.
A truck is carrying a steel beam of length 15.0 m on a free-way. An accident causes the beam to be dumped off the truck and slide horizontally along the ground at a speed of 25.0 m/s. The velocity of the center of mass of the beam is north-ward while the length of the beam maintains an east-west orientation. The vertical component of the Earths magnetic field at this location has a magnitude of 35.0 T. What is the magnitude of the induced emf between the ends of the beam?
(a) A car generator turns at 400 rpm when 1he engine is idling. Its 300-turn, 5.00 by 8.00 cm rectangular coil rotates in an adjustable magnetic field 50 that it can produce suf?cient voltage even at low rpms. What is the field strength needed to produce a 24.0 V peak emf? (b) Discuss how this required field strength compares to those available in permanent and electromagnets.
The current I through a long solenoid with n trims per meter and radius R is changing with time as given by dI/dt. Calculate the induced electric field as a function of distance r from the central axis of the solenoid.
A rectangular conducting loop is placed near a long wire carrying a current I as shown in Figure OQS1.3. If I decreases in time, what can be said of the current induced in the loop? (a) The direction of the current depends on the size of the loop. (b) The current is clockwise. (c) The current is counterclockwise. (d) The current is zero. (e) Nothing can he said about the current in the loop without more information.
To monitor the breathing of a hospital patient, a thin belt is girded around the patients chest as in Figure P20.21. The belt is a 200-turn coil. When the patient inhales, the area encircled by the coil increases by 39.0 cm2. The magnitude of Earths magnetic field is 50.0 T and makes an angle of 28.0 with the plane of the coil. Assuming a patient takes 1.80 s to inhale, find the magnitude of the average induced emf in the coil during that time. Figure P20.21