A furniture company manufactures chairs and desks. The sawing department cuts the lumber for both products, which is then sent to separate assembly departments. Assembled items are sent to the painting department for finishing. The daily capacity of the sawing department is 200 chairs or 80 desks. The chair assembly department can produce 120 chairs daily, and the desk assembly department 60 desks daily. The paint department has a daily capacity of either 150 chairs or 100 desks. Given that the profit per chair is $50 and that of a desk is $100. Formulate the problem as a linear program to determine the optimal product mix for the company.

A furniture company manufactures chairs and desks. The sawing department cuts the lumber for both products, which is then sent to separate assembly departments. Assembled items are sent to the painting department for finishing. The daily capacity of the sawing department is 200 chairs or 80 desks. The chair assembly department can produce 120 chairs daily, and the desk assembly department 60 desks daily. The paint department has a daily capacity of either 150 chairs or 100 desks. Given that the profit per chair is $50 and that of a desk is $100. Formulate the problem as a linear program to determine the optimal product mix for the company.

Practical Management Science

6th Edition

ISBN:9781337406659

Author:WINSTON, Wayne L.

Publisher:WINSTON, Wayne L.

Chapter11: Simulation Models

Section: Chapter Questions

Problem 68P

See similar textbooks

Similar questions

A brewery produces regular beer and a lower-carbohydrate Tight beer. Steady customers of the brewery buy 12 units of regular beer and 16 units of light beer monthly. While setting up the brewery to produce the beers, the management decides to produce extra beer, beyond that needed to satisfy customers. The cost per unit of regular beer is $32,000 and the cost per unit of light beer is $60,000. Every unit of regular beer brings in $100,000 in revenue, while every unit of light beer brings in $300,000 in revenue. The brewery needs at least $9,000,000 in revenue, and has determined that the total demand will be at least 50 units of beer. Complete parts (a) and (b).
Weenies and Buns is a food processing plant which manufactures hot dogs and hot dog buns. They grind their own flour forthe hot dog buns at a maximum rate of 200 pounds per week. Eachhot dog bun requires 0.1 pound of flour. They currently have a contract with Pigland, Inc., which specifies that a delivery of 800pounds of pork product is delivered every Monday. Each hot dogrequires pound of pork product. All the other ingredients in thehot dogs and hot dog buns are in plentiful supply. Finally, the laborforce at Weenies and Buns consists of 5 employees working fulltime (40 hours per week each). Each hot dog requires 3 minutes oflabor, and each hot dog bun requires 2 minutes of labor. Each hotdog yields a profit of $0.80, and each bun yields a profit of $0.30.Weenies and Buns would like to know how many hot dogsand how many hot dog buns they should produce each week so asto achieve the highest possible profit.(a) Formulate a linear programming model for this problem.D,I (b) Use the…
. A refiner in city Q serves four customers near city W and maintains consignment inventory (owned by the refiner) at each location. Currently, the refiner uses TL (truckload) transportation to deliver separately to each customer. Each truck costs $(759) plus $(309) per stop. The refiner is considering aggregating deliveries to city W on a single truck. The demand of the first customer is 75 tons a year, the demand of the second customer is 30 tons per year, and the demand of the third and fourth customers is 10 tons per year. The product cost is $8,000 per ton, and it uses a holding cost of (24)%. The truck capacity is 20 tons. a. What is the optimal delivery policy to each customer if the refiner ships separately to each of them? What is the annual total inventory-related cost? b. What is the optimal delivery policy to each customer if the refiner aggregates shipments to each of the four customers on every truck that goes to city W? What is the annual total inventory-related cost?…
The Tiny Toy Company makes three types of new toys: the tiny tank, the tiny truck, and the tiny turtle. Plastic used in one unit of each is 1.5, 2.0 and 1.0 pounds, respectively. Rubber for one unit of each toy is 0.5, 0.5, and 1.0 pounds, respectively. Also, each tank uses 0.3 pounds of metal, and the truck uses 0.6 pounds of metal during production. The average weekly availability for plastic is 16,000 pounds, 9,000 pounds of metal, and 5,000 pounds of rubber. It takes two hours of labor to make one tank, two hours for one truck, and one hour for a turtle. The company allows no more than 40 hours a week for production (priority #1). Finally, the cost of manufacturing one tank is $7, 1 truck is $5 and 1 turtle is $4; a target budget of $164,000 is initially used as a guideline for the company to follow. a) Minimize over-utilization of the weekly available supply of materials used in making the toys and place twice as much emphasis on the plastic (priority #2) b) Minimize the…
Tiny Toy Company makes three types of new toys: the tiny tank, the tiny truck, and the tiny turtle. Plastic used in one unit of each is 1.5, 2.0 and 1.0 pounds, respectively. Rubber for one unit of each toy is 0.5, 0.5, and 1.0 pounds, respectively. Also, each tank uses 0.3 pounds of metal, and the truck uses 0.6 pounds of metal during production. The average weekly availability for plastic is 16,000 pounds, 9,000 pounds of metal, and 5,000 pounds of rubber. It takes two hours of labor to make one tank, two hours for one truck, and one hour for a turtle. The company allows no more than 40 hours a week for production (priority #1). Finally, the cost of manufacturing one tank is $7, 1 truck is $5 and 1 turtle is $4; a target budget of $164,000 is initially used as a guideline for the company to follow. Minimize over-utilization of the weekly available supply of materials used in making the toys and place twice as much emphasis on the plastic (priority #2) I understand…
The Tiny Toy Company makes three types of new toys: the tiny tank, the tiny truck, and the tiny turtle. Plastic used in one unit of each is 1.5, 2.0 and 1.0 pounds, respectively. Rubber for one unit of each toy is 0.5, 0.5, and 1.0 pounds, respectively. Also, each tank uses 0.3 pounds of metal and the truck uses 0.6 pounds of metal during production. The average weekly availability for plastic is 16,000 pounds, 9,000 pounds of metal, and 5,000 pounds of rubber. It takes two hours of labor to make one tank, two hours for one truck, and one hour for a turtle. The company allows no more than 40 hours a week for production (priority #1). Finally, the cost of manufacturing one tank is $7, 1 truck is $5 and 1 turtle is $4; a target budget of $164,000 is initially used as a guideline for the company to follow. Minimize over-utilization of the weekly available supply of materials used in making the toys and place twice as much emphasis on the plastic (priority #2) Minimize the under and…
The Tiny Toy Company makes three types of new toys: the tiny tank, the tiny truck, and the tiny turtle. Plastic used in one unit of each is 1.5, 2.0 and 1.0 pounds, respectively. Rubber for one unit of each toy is 0.5, 0.5, and 1.0 pounds, respectively. Also, each tank uses 0.3 pounds of metal and the truck uses 0.6 pounds of metal during production. The average weekly availability for plastic is 16,000 pounds, 9,000 pounds of metal, and 5,000 pounds of rubber. It takes two hours of labor to make one tank, two hours for one truck, and one hour for a turtle. The company allows no more than 40 hours a week for production (priority #1). Finally, the cost of manufacturing one tank is $7, 1 truck is $5 and 1 turtle is $4; a target budget of $164,000 is initially used as a guideline for the company to follow. a) Minimize over-utilization of the weekly available supply of materials used in making the toys and place twice as much emphasis on the plastic (priority #2) b) Minimize the under…
green vehicule Inc. manufactures electric cars and small delivery trucks. it has just opened a new factory where the C1 car and the T1 truck can both be manufactured. to make either vehicle, processing in the assembly shop and the paint shop are required. It takes 1/40 of a day and 1/60 of a paint a truck of type T1 and a car of type C1 in the paint shop, respectively. it takes 1/50 of a day to assemble either type of vehicule in the assembly shop. A t1 truck and a C1 car yield profits of $300 and $220, respectively, per vehicule sold
Hawkins Manufacturing Company produces connecting rods for 4- and 6-cylinder automobile engines using the same production line. The cost required to set up the production line to produce the 4-cylinder connecting rod is $2,000, and the cost required to set up the production for the 6-cylinder connecting rod is $3,500. Manufacturing costs are $15 for each 4-cylinder connecting rod and $18 for each 6-cylinder connecting rod. Hawkins makes a decision at the end of each week as to which product will be manufactured the following week. If a production changeover is necessary from one week to the next, the weekend is used to reconfigure the production line.Once the line has been set up, the weekly production capacities are 6,000 6-cylinder connecting rods and 8,000 4-cylinder connecting rods. Letx4 = the number of 4-cylinder connecting rods produced next week,x6 = the number of 6-cylinder connecting rods produced next week,s4 = 1 if the production line is set up to produce the 4-cylinder…
Foodie Goodie is a small food processing plant. It produces three kinds of snacks: sunflower seeds, peanuts and broad beans. The plant’s production capacity is as follows: • if all the equipment produces sunflower seeds, it can produce 6 kg a day; • if all the equipment produces peanuts, it can produce 5 kg a day; • if all the equipment produces broad beans, it can produce 3 kg a day. Production is planned on a weekly basis (i.e., 5 working days), and the output of the week must be stored before delivery. It takes • 1.8 litres of space to store 1 kg of sunflower seeds; • 1.9 litres of space to store 1 kg of peanuts; • 1.3 litres of space to store 1 kg of broad beans. The total storage space available is 100 litres. Due to a commercial agreement with a restaurant, Foodie Goodie must deliver at least 5 kg of broad beans every week. The marketing department estimates that the weekly demand for sunflower seeds, peanuts and broad beans does not exceed 11 kg, 15 kg and 8 kg, respectively, so…
CompDesk, Inc., makes a single model of an ergonomic desk (with chair) for computer usage. The desk is manufactured in building 1, and the chair is manufactured in building 2. Monthly capacities and production levels are as follows. Building 1 (Desks) Building 2 (Chairs) Monthly capacity 400 500 Monthly production 400 400 The company will sell a desk only with a chair and can sell 500 desks per month. The units (desk with chair) sell for $312 each and have a variable cost of $129 each. Required: a. Is there a bottleneck at CompDesk in Building 1 or Building 2? b. CompDesk’s production supervisors state they could increase building 1’s capacity by 100 desks per month by producing desks on the weekend. Producing on the weekend would not affect the sales price. Variable cost per unit would increase by $29 for those produced on the weekend because of the premium paid to labor. Fixed costs would also increase by $20,800 per month. b-1. Calculate the differential…
Tech, with a student population of 30,000, is located in a small college town in Virginia. DirectCast Cable TV has a small service staff that is sufficient to handle installations and TV hookups for almost the entire year. However, for the month-long period right before and during the beginning of fall semester in August, when all the students return, the cable TV service is overwhelmed and must bring in an additional 14 technicians from other company offices. The DirectCast offices in the following seven cities have available service technicians to loan, as shown: City Available Technicians Distance (mi.) Cost ($) Richmond 4 211 3,400 Charlotte 3 173 3,920 Atlanta 5 410 4,760 Greensboro 2 152 3,560 DC 6 263 4,980 Nashville 3 414 4,050 Norfolk 2 302 3,240 This table also shows the distances (in miles) from the cities to the town where Tech is located, and the cost for relocating a technician for 1…