A Geiger-Muller tube is a type of gas-filled radiation detector. It can detect particles like X-rays, alpha particles, and beta rays (electrons). This is useful in quantizing the activity of a radioactive source or determining if an area containing radioactive material is safe to enter. If a Geiger counter is filled with 1 mol of argon gas at pressure P = 1.0620 × 10* Pa and temperature T = 22.2 °C, what is the density p of the gas in this Geiger tube in grams per cubic centimeter? The atomic mass of argon is aar = 39.948 g/mol. p = g/cm?

A Geiger-Muller tube is a type of gas-filled radiation detector. It can detect particles like X-rays, alpha particles, and beta rays (electrons). This is useful in quantizing the activity of a radioactive source or determining if an area containing radioactive material is safe to enter. If a Geiger counter is filled with 1 mol of argon gas at pressure P = 1.0620 × 10* Pa and temperature T = 22.2 °C, what is the density p of the gas in this Geiger tube in grams per cubic centimeter? The atomic mass of argon is aar = 39.948 g/mol. p = g/cm?

University Physics Volume 2

18th Edition

ISBN:9781938168161

Author:OpenStax

Publisher:OpenStax

Chapter1: Temperature And Heat

Section: Chapter Questions

Problem 108AP: Even when shut down after a period of normal use, a large commercial nuclear reactor transfers...

See similar textbooks

Similar questions

An argon-40 atom has a mass of 6.64 ✕ 10−26 kg. (a) What temperature (in K) would a gas composed entirely of argon-40 atoms have to be at in order for the rms speed of the atoms to equal the escape speed from Earth, 1.12 ✕ 104 m/s? (b) What temperature (in K) would a gas composed entirely of argon-40 atoms have to be at in order for the rms speed of the atoms to equal the escape speed from the Moon, 2.37 ✕ 103 m/s?
A 5 L tank contains Argon gas at 55°C and 4.5 atm. Find the total translational kinetic energy of all the Argon atoms in the tank. 1 atm = 1.013 x 10^5 Pa 1 L = 10^-3 m^3 R= 8.314 J/K-mol Molar mass of Argon= 40 Kb=1.38 x 10 ^-23 J/K
A deuteron 21H, is the nucleus of a hydrogen isotope and consists of one proton and one neutron. The plasma of deuterons in a nuclear fusion reactor must be heated to about 2.94×108 K. What would the temperature of the plasma be if the deuterons had an rms speed equal to 0.11 c? Express your answer in kelvins.
There are two important isotopes of uranium: 235U and 238U. These isotopes have different atomic masses and react differently. Only 235U is very useful in nuclear reactors. One of the techniques for separating them (gas diffusion) is based on the different rms speeds of uranium hexafluoride gas, UF6. a)The molecular masses for UF6 with 235U and UF6 with 238U are 349.0 g/mol and 352.0 g/mol, respectively. What is the ratio of rms speeds?
As radioactive plutonium isotopes decay, they generate heat as a byproduct. Pu-239 generates 1.9W/kg of heat. How much heat will 1.25molof Pu-239 release after decaying for three hours? Express this quantity in units of calories. Assume Pu-239 has a molecular weight of 244g/mol.
A rigid tank contains 67.0 g of chlorine gas (Cl2) at a temperature of 76 °C and an absolute pressure of 5.10 x 105 Pa.Later, the temperature of the tank has dropped to 38 °C and, due to a leak, the pressure has dropped to 3.00 x 105 pa.How many grams of chlorine gas have leaked out of the tank? (The mass per mole of Cl2 is 70.9 g/mol.)
A 7.97 m3 tank contains 10.5 g of chlorine gas (Cl2) and an absolute pressure of 5.50 × 105 Pa. The mass per mole of Cl2 is 70.9 g/mol. (a) Determine the temperature of the tank in Celsius. (b) Later, the temperature of the tank has dropped to 33 °C and, due to a leak, the pressure has dropped to 3.30 × 105 Pa. How many grams of chlorine gas have leaked out of the tank?
There are two important isotopes of uranium— 235U and 238U ; these isotopes are nearly identical chemically but have different atomic masses. Only 235U is very useful in nuclear reactors. One of the techniques for separating them (gas diffusion) is based on the different average velocitiesvrms of uranium hexafluoride gas, UF6 . (a) The molecular masses for 235U UF6 and 238U UF6 are 349.0 g/moland 352.0 g/mol, respectively. What is the ratio of their average velocities? (b) At what temperature would their average velocities differ by 1.00 m/s? (c) Do your answers in this problem imply that this technique may be difficult?
What is the density of diatomic nitrogen gas (N2) at a temperature of 20.00 C under a pressure of 100 kPa? The atomic mass of nitrogen is 14 g/mole. a. 1.15 kg/m3 b. 1.97 kg/m3 c. 2.33 kg/m3 d. 2.76 kg/m3 e. 1.50 kg/m3
A student in a lecture hall has 0.320 m2 of skin (arms, hands, and head) exposed. The skin is at 34.0°C and has an emissivity of 0.970. The temperature of the room is 29.5°C (air, walls, ceiling, and floor all at the same temperature). The Stefan–Boltzmann constant is 5.670 × 10−8 W/ (m2. K4 ). A) At what rate does the skin emit thermal radiation? in W B) At what rate does the skin absorb thermal radiation? in W C) At what rate does the skin absorb thermal radiation? in W D) Compare this to the total rate of heat flow from the body, which is about 100 W.______ % of total rate
Suppose a tank contains 666 m3 of neon (Ne) at an absolute pressure of 1.01x105 Pa. The temperature is changed from 293.2 to 294.9 K. What is the increase in the internal energy of the neon?
Even when shut down after a period of normal use, a large commercial nuclear reactor transfers thermal energy at the rate of 150 MW by the radioactive decay of fission products. This heat transfer causes a rapid increase in temperature if the cooling system fails (1 watt = 1 joule/second or 1 W = 1 J/s and 1 MW = 1 megawatt). (a) Calculate the rate of temperature increase in degrees Celsius per second (C/s) if the mass of the is 1.60105 kg and it has an average specific heat of 0.3349 kJ/kg . C. (b) How long would it take to obtain a temperature increase of 2000 C, which could cause some metals holding the radioactive materials to melt? (The initial rate of temperature increase would be greater than that calculated here because the heat transfer is concentrated in a smaller mass. Later, however, the temperature increase would slow down because the 500,000-kg steel containment vessel would also begin to heat up.)