A GFRP product is made from: 7.0 mm long by 0.002 mm diameter aligned fibres with Ef =72.5GPa and a tensile strength of 3.5GPa, and a matrix material with Em=1.6GPa and a tensile strength of 41.4MPa. The stress in the matrix at the fibre fracture strain is 20MPa. a) If the shear strength of the fibre-matrix bond is τc=10MPa then determine the longitudinal composite strength (σ∗) when the GFRP is made with ϕf=0.4. b) Determine the stiffness of this GFRP product in the longitudinal and transverse directions. c) If it were possible to modify the design of this GFRP product, determine the volume fraction of fibre that would be needed to achieve a strength (σ∗) of 2000MPa
A GFRP product is made from: 7.0 mm long by 0.002 mm diameter aligned fibres with Ef =72.5GPa and a tensile strength of 3.5GPa, and a matrix material with Em=1.6GPa and a tensile strength of 41.4MPa. The stress in the matrix at the fibre fracture strain is 20MPa. a) If the shear strength of the fibre-matrix bond is τc=10MPa then determine the longitudinal composite strength (σ∗) when the GFRP is made with ϕf=0.4. b) Determine the stiffness of this GFRP product in the longitudinal and transverse directions. c) If it were possible to modify the design of this GFRP product, determine the volume fraction of fibre that would be needed to achieve a strength (σ∗) of 2000MPa
Elements Of Electromagnetics
7th Edition
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Sadiku, Matthew N. O.
ChapterMA: Math Assessment
Section: Chapter Questions
Problem 1.1MA
Related questions
Question
Question 2: A GFRP product is made from: 7.0 mm long by 0.002 mm diameter aligned fibres with Ef =72.5GPa and a tensile strength of 3.5GPa, and a matrix material with Em=1.6GPa and a tensile strength of 41.4MPa. The stress in the matrix at the fibre fracture strain is 20MPa. a) If the shear strength of the fibre-matrix bond is τc=10MPa then determine the longitudinal composite strength (σ∗) when the GFRP is made with ϕf=0.4. b) Determine the stiffness of this GFRP product in the longitudinal and transverse directions. c) If it were possible to modify the design of this GFRP product, determine the volume fraction of fibre that would be needed to achieve a strength (σ∗) of 2000MPa
Expert Solution
This question has been solved!
Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.
Step by step
Solved in 3 steps with 3 images
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.Recommended textbooks for you
Elements Of Electromagnetics
Mechanical Engineering
ISBN:
9780190698614
Author:
Sadiku, Matthew N. O.
Publisher:
Oxford University Press
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:
9780134319650
Author:
Russell C. Hibbeler
Publisher:
PEARSON
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:
9781259822674
Author:
Yunus A. Cengel Dr., Michael A. Boles
Publisher:
McGraw-Hill Education
Elements Of Electromagnetics
Mechanical Engineering
ISBN:
9780190698614
Author:
Sadiku, Matthew N. O.
Publisher:
Oxford University Press
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:
9780134319650
Author:
Russell C. Hibbeler
Publisher:
PEARSON
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:
9781259822674
Author:
Yunus A. Cengel Dr., Michael A. Boles
Publisher:
McGraw-Hill Education
Control Systems Engineering
Mechanical Engineering
ISBN:
9781118170519
Author:
Norman S. Nise
Publisher:
WILEY
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:
9781337093347
Author:
Barry J. Goodno, James M. Gere
Publisher:
Cengage Learning
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:
9781118807330
Author:
James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:
WILEY