A heart defibrillator being used on a patient has an RC time constant of 11.0 ms due to the resistance of the patient asnd the capacitance of the defibrillator. If the defibrillator has an 7.25uF capacitance, what is nthe resistance of the path through the patient? If the initial voltage is 12.0 kV, how long does it take to declineto 427 V?

A heart defibrillator being used on a patient has an RC time constant of 11.0 ms due to the resistance of the patient asnd the capacitance of the defibrillator. If the defibrillator has an 7.25uF capacitance, what is nthe resistance of the path through the patient? If the initial voltage is 12.0 kV, how long does it take to declineto 427 V?

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter29: Direct Current (dc) Circuits

Section: Chapter Questions

Problem 19PQ

See similar textbooks

Similar questions

Consider the circuit below. The battery has an emf of = 30.00 V and an internal resistance of r = 1,00 . (a) Find the equivalent resistance of the circuit and the current out of the battery. (b) Find the current through each resistor, (c) Find die potential drop across each resistor, (d) Find the power dissipated by each resistor, (e) Find the total power supplied by the batteries.
An ECG monitor must have an KC time constant lessthan 1.00102s to be able to measure variations involtage oversmall time intervals, (a) If the resistance of the circuit (duemostly to that of the patient's chest) is 1.00kTwhat is the maximum capacitance of the circuit?(b) Would It be difficult in practice to limit the capacitance to less than the value found in (a)?
A heart defibrillator being used on a pation has an RC time constant of 15 ms due to the resistance of the patient and the capacitance of the defibrillator. If the defibrillator has a 9.5 uF capacitance, what is the resistance of the path through the patient? If the initial voltage is 12.0 kV, how long does it take to decline to 843 V?
A heart defibrillator being used on a patient has an RC time constant of 10.5 ms due to the resistance of the patient's body and the capacitance of the defibrillator. If the initial voltage is 14 kV, how long does it take to decline to 6.00 × 102 V in ms?
An emf of 10 V is connected to a series RC circuit consisting ofa resistor of 2.0 x 106 Ω and an initially uncharged capacitorof 3.0 µF. Find the time required for the charge on the capacitorto reach 90% of its final value.
A heart defibrillator being used on a patient has an RC time constant of 11.0 ms due to the resistance of the patient and the capacitance of the defibrillator. If the defibrillator has an 8.258.25 μF capacitance, what is the resistance of the path through the patient? If the initial voltage is 12.0 kV, how long does it take to decline to 843 V?
An initially uncharged 4.35×10−6 F capacitor and a 7690 ohm resistor are connected in series to a 1.50 V battery that has negligible internal resistance. What is the initial current i0 in the circuit? i0=? Calculate the circuit's time constant ? . ?=?s How much time ? must elapse from the closing of the circuit for the current to decrease to 3.85% of its initial value? t=?
Power P0 = I0 ∆V0 is delivered to a resistor of resistance R0.If the resistance is doubled (Rnew = 2R0) while the voltageis adjusted such that the current is constant, what are theratios (a) Pnew /P0 and (b) ∆Vnew /∆V0? If, instead, the resistanceis held constant while Pnew = 2P0, what are the ratios(c) ∆Vnew /∆V0 , and (d) Inew /I0 ?
An ECG monitor must have an RC time constant less than 1.00 × 102 μs so it can measure variations in voltage over small time intervals. If the resistance of the circuit (due mostly to that of the patient’s chest) is 0.85 kΩ, what is the maximum capacitance of the circuit in F?
In the circuit below, the capacitor starts out uncharged. The resistance is R = 118 Ω, capacitance is C = 0.0647 F, and the battery emf is 16.7 V. What is the charge (Q) on the capacitor at a time of t = 3.72 seconds after the switch is closed?
A 0.20-ΩF capacitor is to be charged through a resistor so that it becomes 63 percent charged in0.10 s. What should the resistance of the capacitor be?
Integrated Concepts. A 12.0-V emf automobile battery has a terminal voltage of 16.0 V when being charged by a current of 10.0 A. At what rate (in oC/min ) will its temperature increase if its mass is20.0 kg and it has a specific heat of 0.300 kcal/kg. oC, assuming no heat escapes?