A heating element is made by maintaining a potential difference of 75.0 V across the length of a Nichrome wire that has a 2.60 x 10-6 m² cross section. Nichrome has a resistivity of 5.00 x 10-7 N•m. If the element dissipates 5000 W, what is its length? Give your answer in cm.
Q: A 1.50 m cylindrical rod of diameter 0.500 cm is connected to a power supply that maintains a…
A: (a) Resistivityof rod at 20° = 1.05× 10^-5ohm /m (b) Temperature coefficient of resistivity at 20°C…
Q: A rod of 2.0-m length and a square (2.0 mm x 2.0 mm) cross section is made of a material with a…
A: length of the rod(L)=2m cross-section area (A)= 4 mm2=0.000004 m2 Restitivity (ρ)=6x10-8 Ωm…
Q: A heating element is made by maintaining a potential difference of 75.0 V across the length of a…
A: Data provided: Potential difference (V) = 75.0 V Resistivity of nichrome (ρ) = 5.00×10-7 Ωm Area…
Q: A 2.0 mm diameter iron wire ( resistivity, p = 9.7 x 10 8 0-m) carries a current of 2.5 A. Determine…
A:
Q: A copper wire of radius a = 0.161 mm has an aluminum jacket of outer radius b = 0.224 mm. There is a…
A: Data Given , Inner Radius of the wire ( a ) = 0.161 mm = 0.161 × 10-3 m Outer Radius of wire ( b )…
Q: A cylindrical resistor of radius 3.9 mm and length 2.0 cm is made of material that has a resistivity…
A:
Q: A rod of 2.0-m length and a square (2.0 mm × 2.0 mm) cross section is made of a material with a…
A: Given data: Length (L) = 2.0 m Cross section area (A) = 2.0 mm × 2.0 mm Resistivity (ρ) = 6.0×10-8…
Q: A 1.30 m cylindrical rod of diameter 0.500 cm is connected to a power supply that maintains a…
A: diameter= 0.500 cm potential difference = 15.0 V Room temp. T0=20 C
Q: A copper wire of radius a = 0.204 mm has an aluminum jacket of outer radius b = 0.296 mm. There is a…
A: Data Given , Inner Radius of the wire ( a ) = 0.204 mm = 0.204 × 10-3 m Outer Radius of wire ( b )…
Q: A spool of iron wire 320 m long and with a diameter of 0.360 mm is at 20.0°C. For iron, the…
A: Given value--- length =320 m. diameter = 0.36 mm. resistivity = 10 × 10-8 ohm m. temperature…
Q: In an experiment, the current through a wire is 0.200 A and the voltage across the wire is 0.800 V.…
A:
Q: A copper wire has a circular cross section with a radius of 1.01 mm. HINT (a) If the wire carries a…
A:
Q: A block of gold of volume 232 mm is used to make a wire 78.9 m long. What is the resistance (in 0)…
A:
Q: copper wire is r = 2.19 cm in radius and 2.6 m in length, has a resistivity of 1.72x10^-8 Ω m, and…
A: Given: The radius of the wire is 2.19 cm. The length of the wire is 2.6 m. The resistivity of the…
Q: The filament of an incandescent light bulb is made of tungsten which has a thermal coefficient of…
A: We have I =VR=VR01+α∆T
Q: A wire is made from a material having a temperature coefficient of resistivity of 0.00125 (°C)". In…
A:
Q: Calculate the drift velocity (in x1o-6 m/s) of electrons in a silver cylindrical conductor with a…
A:
Q: A potential difference of 3.00 µV is set up across a 2.00 cm length of a wire (with resistivity of…
A:
Q: A spool of copper wire 290 m long and with a diameter of 0.360 mm is at 20.0°C. For copper, the…
A: The wire's resistivity is, ρ=1.7×10-8 Ω The wire's length is, L=290 m The radius of wire is, r=0.360…
Q: A spool of iron wire 260 m long and with a diameter of 0.320 mm is at 20.0°C. For iron, the…
A:
Q: A rod of 2.0-m length and a square (2.0 mm x 2.0 mm) cross section is made of a material with a…
A: Given data: The length of the rod, l=2.0 m. The side length of the square cross section of the rod,…
Q: An aluminum wire with a diameter of 0.125 mm has a uniform electric field of 0.255 V/m imposed along…
A: We are authorized to answer three subparts at a time, since you have not mentioned which part you…
Q: A current of 10.0 A is carried by a copper wire of diameter 1.10 mm. If the density of the…
A:
Q: A copper wire has a circular cross section with a radius of 1.96 mm. HINT (0) If the wire carries a…
A: Given data Charge of an electron is q=1.60×10-19 C Density of mobile charge is n=1.10×1029…
Q: Three equally long meter-long copper wires with diameters of 1 mm, 2 mm and 3 mm are connected in…
A: The area of the first wire is, A1=πr12=πd124=3.141 mm24=0.785 mm2 The area of the second wire is,…
Q: A wire (length = 2.0 m, diameter = %3D 1.0 mm) has a resistance of 0.45 Q. What is the resistivity…
A:
Q: A metallic conductor has a resistivity of 18 ´ 10-6 W×m. What is the resistance of a piece that is…
A: Given: ρ=18×106 Ωml = 30 mA = 3mm2 = 3×10-6 m2 Solution: Consider the expression for resistance: R…
Q: A heating element is made by maintaining a potential difference of 89.0 V across the length of a…
A: Given that; Potential difference, V=89 V Cross section, A=4.96×10-6m2 Resistivity, ρ=5×10-7Ωm a) We…
Q: A tungsten wire has a radius of 0.097 mm and is heated from 20.0 to 1383 oC. The temperature…
A: radius of tungsten wire , r = 0.097 mm = 0.097 x 10-3 m Initial temperature , T1 = 20 °C Final…
Q: A heating element is made by maintaining a potential difference of 75.0 V across the length of a…
A:
Q: An aluminum wire with a diameter of 0.095 mm has a uniform electric field of 0.215 V/m imposed along…
A:
Q: A spool of copper wire 200 m long and with a diameter of 0.320 mm is at 20.0°C. For copper, the…
A:
Q: A 2.0 mm diameter iron wire ( resistivity, ρ = 9.7 x 10–8 Ω-m) carries a current of 2.5 A. Determine…
A: Given value--- diameter = 2 mm. resistivity = 9.7 × 10-8 ohm m. current = 2.5 Amp. length = 20 m.…
Q: A spool of copper wire 200 m long and with a diameter of 0.320 mm is at 20.0°C. For copper, the…
A: Calculate the resistance of the wire.
Q: Wire C and wire D are made from different materials and have length LC = LD = 3.1 m. The resistivity…
A: The electric potential difference between point 1 and 2 is the potential drop in wire C.Write the…
Q: A copper wire of radius a = 0.172 mm has an aluminum jacket of outer radius b = 0.231 mm. There is a…
A:
Q: A cylindrical wire is made from a material having a resistivity of 1.6 x 10* om ; it has a length of…
A:
Q: A straight eylindrical wire lying along the x axis has a length of L = 2.4 m and a radius of r =…
A:
Q: A conductor has a cross-sectional area of 2.3x 10P m and the number of free electrons per unit…
A:
Q: A heating element is made by maintaining a potential difference of 75.0 V across the length of a…
A: Given data: Potential difference (V) = 75.0 V Cross section area (A) = 2.60×10-6 m2 Resistivity (ρ)…
Q: A heating element is made by maintaining a potential difference of 71.0 V across the length of a…
A: Given Potential difference V = 71 V Cross sectional area = 3.56×10-6 m2 resistivity ρ =…
Q: A heating element is made by maintaining a potential difference of 75.0 V across the length of a…
A:
Step by step
Solved in 2 steps with 2 images
- What current flows through a 2.54-cm-diameter rod of Pure silicon that is 20.0 cm long, when 1.00103 V is applied to it? (Such a rod may be used to make nuclear- particle detectors, for example.)A 22-gauge copper wire has a radius of 0.645 mm, is 5.00 m long, and has a resistivity r = 1.72 ´ 10-8 ohm-m. The maximum current for which this wire is rated is 0.920A. What is the maximum electric potential difference that may be applied to this wire without overloading it ?A heating element is made by maintaining a potential difference of 75.0 V across the length of a Nichrome wire that has a 2.60 * 10-6 m2 cross section. Nichrome has a resistivity of 5.00 * 10-7 ohmm. (a) If the element dissipates 5000 W, what is its length? (b) If 100 V is used to obtain the same dissipation rate, what should the length be?
- What is the resistance of a 2.54-cm-diameter rod of pure silicon that is 20.0 cm long. What current flows through the rod when 1.00 × 103V is applied to it?A copper (resistivity = 1.72 EXP-8 Ω.m) conductor with a square cross section, 1.0 mm on a side is 100 m long and is initially 20oC. 1. If the temperature coefficient (a) of copper is 0.00393 per degree Celsius, what is the change in resistance of the copper conductor if the temperature is increased to 100 degrees Celsius? 2. What is the resistance of this conductor?When 100.0 V is applied across a 5-gauge (diameter 4.621 mm) wire that is 10 m long, the magnitude of the current density is 2.0 × 108 A/m2 . What is the resistivity of the wire?
- A wire 3.77 m long and 6.81 mm in diameter has a resistance of 20.6 mΩ. A potential difference of 26.6 V is applied between the ends. What is the magnitude of the current density? Current in the wire is 1291.26 A Answer isnt 11284400, 3547400000,A heating element is made by maintaining a potential difference of 75.0 V across the length of a Nichrome wire that has a 2.60 x 10-6 m2 cross section. Nichrome has a resistivity of 5.00 x 10-7 Ω·m. (I) If the element dissipates 5000 W, what is its length?(II) If a potential difference of 100 V is used to obtain the same dissipation rate, whatshould the length be?A copper wire is r = 2.19 cm in radius and 2.6 m in length, has a resistivity of 1.72x10^-8 Ω m, and carries a current of 3.23 A. The wire has a charge carrier density of 8.49x10^28 electrons/m3. What is the electric potential difference, V in volts, across the wire? Note: Express your answer to three significant figures. Use scientific notation
- A heating element is made by maintaining a potential difference of 125.0 V across the length of a Nichrome wire that has 2.00x10^-6 m^2 cross section. Nichrome has a resistivity of 5.00x10^-7 Ω x m. (a) If the element dissipates 5000. W, what is its length?(b) If 100. V used to obtain the same dissipation rate, what should the length be?a) A1500W heater is connected to a 120V line. How many heat energy does it produce in 2.0hours? b) The resistivity of gold is 2.44x10-8ohm.m at room temperature. A gold wire that is 1.8mm in diameter and 11cm long carries a current of 170mA. How much power is dissipated in the wire?Suppose you conducted an experiment on an ohmic material. When subjected to a potential difference 1V, the current across the material is 4A; and when the potential difference is increased to 2V, the current across the material increases to 8A.1) What is the resistance of the material? a) 4 Ω b) 0.50 Ω c) 2 Ω d) 0.25 Ω2) If you plot the applied potential difference (y-axis) versus the measured current (x-axis)across the material, what should be the expected value of the y-intercept? a) 0 V b) 0.25 V c) 4 V d) 2 V answer all the questions and put explanation for an upvote