A highly viscous liquid is flowing through a vertical tube 0.3 m long and (08 /30) mm in I.D. The density of the liquid is 1260 kg/m³ and the mass flow rate is (08 /2) x 106 kg/s. The pressure drop is neglected. a) What is the viscosity in N s/m?? b) - , Check on the validity of your results.

A highly viscous liquid is flowing through a vertical tube 0.3 m long and (08 /30) mm in I.D. The density of the liquid is 1260 kg/m³ and the mass flow rate is (08 /2) x 106 kg/s. The pressure drop is neglected. a) What is the viscosity in N s/m?? b) - , Check on the validity of your results.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter5: Analysis Of Convection Heat Transfer

Section: Chapter Questions

Problem 5.4P: 5.4 Evaluate the Stanton number for flow over a tube from the following data: , , , , .

See similar textbooks

Related questions

Q: 5. The total head of a fan is 185 m and has a static efficiency pressure of 210 mm of water gage.…

A: Dear student, According to the guidelines I am allowed to answer only one problem…

Q: For a certain value opening in a shut off valve experiment(exercise 1), the water with a velocity of…

A: given data : u = velocity = 0.65 m/sec dh= diameter of pipe = 24mm= 24*10-3 m. kinematic viscosity…

Q: As a process engineer, you are designing a new drinking water treatment plan using conventional…

Q: 1) Convert the flow rate of natural gas is = 22.913x106 Sm3/s to m3/s ? Note: the gas export line…

A: Given that the molecular weight of the gas= 19.3,Relative density = 0.67 , Density = 670 Kg/m3 ;The…

Q: Water (20°C) flows in a 15 cm cast-iron pipe at a rate of 0.075 m/s. For these conditions, determine…

Q: Water at 20°C flows steadily through tion in Fig. P3.34, entering section 1 at 75 L/min. The average…

A: Given, Flow rate at section 1, Q1=75 L/min=7560000m3/s=0.00125 m3/s Average velocity at section…

Q: Medium oil with kinematic viscosity 6.10 x 10^-6 m^2/s, flows through a strsight pipe at a rate of…

Q: What pump power is required if an engineer wants to pump water from one reservoir to another…

A: To find: The power required by pump. Given: The length of pipe is L=100 m. The diameter of pipe is…

Q: Recall that the transverse velocity for Poiseuille flow is Др u(r) + cj In r + c2 , 0 < r < R, 4µL…

A: The cross-section of the tube gives the expression for flow Qo=πR48μ·∆pL ..........(1) Now for r=R3…

Q: A petroleum crude oil having a kinematics viscosity 0.0001 m²/s is flowing through the piping…

A: Dear student, we are suppose to solve only 3 subparts. Please post other parts as a separate…

Q: Calculate the power required per meter of width of stream to force lubricating oil through the gap…

Q: ensity, p = 1.20 kg/m³ and the air dynamic viscosity, µ = 1.80 x 10$ kg/m•s. = freestream velocity,…

Q: pipe with a velocity of 20mm/s. What is the pressure difference between the point of entry to the…

Q: "he laminar flow of a fluid with a constant viscosity, u, inside a channel is governed by the…

A: For solution refer below images.

Q: Example: Engine oil(p = 720 kg/m³) with a coefficient of viscosity of 0.2 Pa/s flows through a 5m…

Q: Take water density p = 998 kg/m° and dynamic viscosity u = 0.001 kg/(m.s). The total flow rate is…

Q: Air at 200°F flows through a pipe with 0.5 inch diameter at a rate of 0.08 Ibm/s. What is the flow…

A: The temperature of the air is T=200°F. The diameter of pipe is D=0.5 in. The flow rate of the air is…

Q: . For steady laminar flow, the reduction in (d(p + yh)/dx ) represents the work done on fluid per…

Q: Water has a coefficient of viscosity of 0.001 Pa/s. What pressure difference is necessary to keep…

A: The viscosity coefficient is a measurement of the fluid's resistance to flow. Gas viscosity is often…

Q: Water at 20°C flows through a 9 cm diameter pig as in Fig. The total length of pipe between flange…

A: Diameter = 9 cm Length = 75 cm Mass flow rate = 32.67 kg/s P1 = 73 kpa P2 = 41 kpa

Q: Recall that the transverse velocity for Poiseuille flow is Др -p² + C1 4µL In r + c2 , u(r) = 0 <r <…

A: Write the expression for the given velocity profile and apply the boundary conditions at the Cather.

Q: The glycerin at 40 C flows through a horizontal cylindrical pipe. The length of the pipe is 70 m and…

Q: Fluid is moving at rate of 3m/s in a chamber of a 12inch positive displacement flow meter, if the…

Q: Consider the steady-state flow of an incompressible Newtonian fluid (viscosity µ, density p) through…

A: It is asked to find the Radius in terms of the horizontal dimensions and also the volumetric flow

Q: Calculate the pressure of an oil of sp.gr. 0.8, and a mercury of sp.gr. 13.6 in N/cm3. Take density…

Q: strsight pipe at a rate of 6.0 liters/s. For laminar flow comditions, what is the least

Q: In an experiment, particles with a diameter of 30 µM are flowing in a 10 cm long tube with a radius…

A: Given that, Diameter of particle, D=30 μm,Length of tube, L=10 cm,Radius of tube, r=0.5 cm,Total…

Q: Air with density of 1.225 kg/m^3 and viscosity of 1.789 x 10^-5 kg/m-s flows in a wind tunnel, the…

Q: 6. With reference to the pipe flow, which of the following sentences are correct? A. In laminar…

A: As per our guidelines, we are restricted to answer only 2 or 3 questions that are similar to like…

Q: Chlorine gas enters a 30-mm ID pipe at 15 m/s, and exits a wider pipe, at 85-mm ID. What is the…

Q: Asap

Q: Example :- Calculate the power in W/m3 required for mixing an oil of relative density 0.93 and…

Q: To have a complete understanding of this, determine parameters such as an area of 60mm bore pipe,…

Q: flow rate of water in a garden hose is measured using the bucket-andstopwatch method. Filling a 5-L…

Q: Suppose in Fig. that h 3 cm, the fluid in the water at20°C, and the flow is turbulent so that the…

A: The density and dynamic viscosity at 20 oC is given as, Density,ρ=998 kg/m3Dynamic…

Q: An ideal gas in which the pressure P is related to the volume V by the equation PV=60 m2/s2 flows in…

Q: Oil (SAE 30) at 15.6°C flows steadily between fixed, horizontal, parallel plates. The pressure drop…

A: given; ⇒pressure drop per unit length -dpdx=40kpa/m…

Q: Using the velocity distribution for a laminar, incompressible flow of a Newtonian fluid in a long…

Q: s, flows through a strsight pipe at a rate of 6.0 liters/s. For laminar flow

Q: In a 0.05m (inside diameter) tube, the mean velocity of 40C fluid with an SG of 1.32 is 2.5m/s. The…

A: Given data: d=0.05 mSG=1.32v=2.5 m/sμ=7.57×10 poise=7.57 Pa.s Need to determine the value of…

Q: Medium oil with kinematic viscosity 6.10 x 10^-6 m^2/s, flows through a strsight pipe at a rate of…

Q: By an inkjet printer the diameter (d) of the points created, the dynamic of the ink viscosity (µ),…

A: Given data To derive an expression for characterize the behavior of the ink jet.

Q: 1 Kerosene (20°C) flows at a rate of 0.04 m3 s in a 25 cm diameter pipe. Would you expect the flow…

A: GivenDiameter of the pipe =25 cmQ=0.04 m3

Q: D. Part (a) : A polymer of densityp=0.85 g/cm³ and viscosity µ = 230 cP flows at a rate Q = 1,560…

A: Since you have posted a question with multiple sub-parts, we will solve the first three subparts for…

Q: What type of flowc

A: Laminar flow (re<2000)

Q: Polymer solution flows in a pipe 80 mm bore diameter with a velocity 0.4 m/s. The density is 890…

A: Given:d=80 mmV=0.4 m/sρ=890 Kg/m3μ=0.075 Ns/m2

Q: Water mass flow rate of 2kg/s is delivered through the 30 mm commercial steel pipe? -0.15 Calculate…

A: Given: mass flow rate of water→m˙=2 Kgs Diameter of the commercial steel pipe→D=30 mm=0.030 m So…

Concept explainers

Fluid Dynamics

The study of the flow of gases and liquids, usually in and around solid surfaces, is known as fluid dynamics in physics and engineering. Fluid dynamics, for example, can be used to evaluate the movement of air through an airplane wing or the surface of a vehicle. It can also be used in ship design to increase the speed at which ships pass through water.

Question

100%

A highly viscous liquid is flowing through a vertical tube 0.3 m long and (08/30) mm in I.D. The
density of the liquid is 1260 kg/m³ and the mass flow rate is (08 /2) x 10° kg/s. The pressure drop is
neglected.
a)
What is the viscosity in N s/m??
b) - , Check on the validity of your results.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The flow rate of water in a garden hose is measured using the bucket-andstopwatch method. Filling a 5-L bucket takes 75 seconds. If the inner diameter of the hose is 10 mm and the density and viscosity of water are approximately 998 kg m-3 and 0.9 cP, respectively, (a) is the flow inside the hose laminar or turbulent? (b) If the flow rate is adjusted such that the flow is with Re = 2100, how long would it take to fill the same bucket?
Water with a dynamic viscosity of 0.892 cP flows in a smooth pipe of diameter, D = 50 mm and length, L = 10 m. The cross-sectional mean velocity is 1.50 m/s. What type of flow is observed? Calculate the discharge, the entrance length and the friction coefficient. Please solve according to question... I need all answers... Thank you
Air flows through a duct at 2,700 cubic feet per minute (CFM). After several feet and a few vents, the air-flow decreases to 1,890 CFM. What is the percent drop that has occurred? (Simplify your answer completely.)
QUESTION 22.1. A water hammer is a phenomenon caused by the sudden increase or decreasein fluid velocity which results in pressure fluctuations in a pipe.A common cause of the water hammer is rapid closure of a valve in apipeline. In order to minimise the pressure rise, the closure time of thevalve needs to be increased. If a pipe (K = 18.9 x 105 kPa) is laid for adistance of 1500 m, which of the following would be considered a gradualvalve closure time?(a) 1.3 seconds(b) 5 seconds(c) 2.18 seconds(d) All of the above 2.2. hich of the following is considered a minor friction loss in pipe system?(a) Slight changes in elevation(b) Shock losses due to a pipe contraction(c) Head loss due to pipe friction(d) Head loss when the fluid passes through a valve.
Oil flows through a 16 tube single cooler with a velocity of 2 m/s. The internal diameter of the tube is 30 mm and oil density is 0.85 gm/ml. Find the volume flow in liters per sec. Answer asap plss. Thanks. I will rate helpful
The Reynolds number is defined for a pipe as (velocity· diameter· density) / viscosity. What isthe Reynolds number for water flowing at 10 ft/ s in a pipe with a diameter of 6 in? What are itsdimensions?
Aiming a 1.69 in diameter garden hose straight up, forms a “bubbler fountain” that you could easily drink from (but you shouldn’t because of bacteria, etc.). The water flows out the hose and down the sides. If the water has a density of 63.1 lbm/ft^3 and a viscosity of 0.0119 g/cm*s, what is the thickness of the water film (df) (in cm) if the flow rate of water is 6.42 in^3/s? For simplicity, assume the film is thin enough that you can use rectangular coordinates.
Sulfuric acid with a density of 1980 kg / m3 and a viscosity of 26.7 cP flows in a pipe with a diameter of 35 mm. If the acid flow rate is 1 m3 / min, what is the pressure loss due to friction in a 30 m long smooth pipe? a. Reynold number = Answer. b. Loss of Pressure = AnswerkPa.
Cell culture media is flowing through a cylindrical tube at a volumetric flow rate of 12 ml/s. The tube has a diameter of 0.8 cm and length of 12cm. Assume the viscosity of the media is 1.2 cP (0.0012 Pa s). a. What is the shear rate at the wall of the tube ? b. What is the shear rate at the centerline of the tube ? c. What is the shear stress at the wall of the tube ?
You are being tasked as a wind tunnel engineer to investigate the performance of newly designed high-speed wind tunnel in UPNM. An exhaust gas flows through a nozzle where the inlet area is 5,000 cm2.At this inlet, the gas has a velocity of 1,200 m/s, temperature of 1,500oC,and pressure of 6,000 kPa. Initial measurement revealed that the pressure at the exit of the wind tunnel is 100 kPa. Based on this information, analyze and investigate ; i. Mach number at inlet of the nozzle ii. The velocity of gas at exit iii. The area of the nozzle at exit Take specific heat ratio for the exhaust gas, ? to be 1.7 and the gas constant, R to be 205 J/kg.
Briefly describe the characteristic of turbulent flow.
What is the proper model flow rate?