A horizontal cylinder of internal diameter 100 mm is filled with water and rotated about its axis with an angular velocity of 3000 rpm. Calculate the pressure at the ends of the horizontal and vertical diameter.

Name: A horizontal cylinder of internal diameter 100 mm is filled with water
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A horizontal cylinder of internal diameter 100 mm is filled with water and rotated about its axis with an angular velocity of 3000 rpm. Calculate the pressure at the ends of the horizontal and vertical diameter. (Answer: *ends of horizontal diameter

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

A 6-in. diameter hole is drilled in the conical frustum. Calculate the volume and the surface area of the resulting body.
The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate and the smooth surface at B due to water pressure acting on the gate. Use =62.4lb/ft3 for water.
A semicircular gate with a diameter of 6 ft is installed at 50º as shown below. The top of the gate is 5 ft below the water surface. Determine the resulting hydrostatic force and the location of the center of pressure on the gate.
A cylindrical tank 2m diameter and 4 m long, with its axis horizontal, is half filled with water and half filled with oil of density 880 kg/m3. Determine the location of the hydrostatic force from the top of the cylinder. Express your answer in two decimal place and in terms of m.
A closed, 0.4-m-diameter cylindrical tank is completely filled with oil (SG= 0.90) and rotates about its vertical longitudinal axis with an angular velocity of 40 rad/s. Determine the difference in pressure just under the vessel cover between a point on the circumference and a point on the axis indicate free body diagram
Suppose that a flat surface is immersed vertically in a fluid of weight density ρ. If ρ is doubled, is the force on the plate also doubled? Explain your reasoning.
Calculate the fluid force on one side of a 5 ft by 5 ftsquare plate if the plate is at the bottom of a pool filled with waterto a depth of 8 ft anda. lying flat on its 5 ft by 5 ft face.b. resting vertically on a 5-ft edge.c. resting on a 5-ft edge and tilted at 45° to the bottom of the pool
Calculate the depth of the center of pressure for vertical rectangular plate having a height h = 10ft and base b = 5ft, and submerged in a liquid with its base at the liquid surface. If the upper base of the vertical rectangular plate given in the example problem is submerged by 12ft below the water surface, determine the location of the hydrostatic force and center of pressure. Answer should be (53,040 lbf and 17.4902ft)
A brass sphere (sp. gr. 8.60) is placed in body of mercury. If the diameter of the sphere is 30 cm (a) what minimum force would be required to hold it submerged in mercury? (b) What is the depth of flotation of the sphere when it is floating freely? NOTE: CLEAR HANDWRITTEN SOLUTION
A bottle consist of a cylinder 35 cm in diameter and 30 cm high and a neck 5 cm in diameter and 30 cm long. The bottle is inserted into a body of water, with the open end of the neck first until the neck is completely filled with water. Assuming the pressure of the atmosphere is standard, and neglecting vapor pressure, what is the depth to which the open end is submerged below the free surface? Show correct figure.
An elliptical plate, major axis 6 feet and minor axis 4 feet, is submerged vertically until its minor axis lies in the surface of the water (weight density =p Ib/fr3). Determine the appropriate integral to be used to determine the force on one side of the submerged
End D of a 2.5 long uniformly plain wooden rod( s.g=0.7) is held 0.3m below the surface of still water. (a.) How much of the rod remains above the water surface? (b.) if the rod diameter is 25mm what force of D is required to hold it in place ?