A hot air filled balloon of 8m diameter is used to support a platform. The surrounding airis at 20° C and 1 bar while the hot air inside the balloon is at a temperature of 70° C.Determine the buoyant force and the weight that may be supported by the balloon

A hot air filled balloon of 8m diameter is used to support a platform. The surrounding airis at 20° C and 1 bar while the hot air inside the balloon is at a temperature of 70° C.Determine the buoyant force and the weight that may be supported by the balloon

Name: A hot air filled balloon of 8m diameter is used to support a platform.
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A hot air filled balloon of 8m diameter is used to support a platform. The surrounding airis at 20° C and 1 bar while the hot air inside the balloon is at a temperature of 70° C.Determine the buoyant force and the weight that may be supported by the

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.121P: One side of the container has a 03-m square door that is hinged at its top edge. If the container is...

See similar textbooks

Similar questions

One side of the container has a 03-m square door that is hinged at its top edge. If the container is filled with water, determine the smallest force F that must be applied to the bottom edge of the door to keep it closed.
A gas is contained in a vertical, frictionless piston– cylinder device. The piston has a mass of 5 kg and a cross-sectional area of 35 cm2. A compressed spring above the piston exerts a force of 75 N on the piston. If the atmospheric pressure is 95 kPa, determine the pressure inside the cylinde
A room in the lower level of a cruise ship has a 40-cm-diameter circular window. If the midpoint of the window is 2 m below the water surface, determine the hydro static force acting on the window, and the pressure center. Take the specific gravity of seawater to be 1.025
The 5 m high and 6 m wide rectangular cover is hinged from point A on its upper edge and is prevented from opening with a fixed wedge at point B. Determine the hydrostatic force and center of pressure exerted on the cover by the 8 m high water. (ρ(water)=1000 kg/m^3 , g= 9.81 m/s^2)
A rectangular plate 3 m X 5 m is immersed vertically in water such that the 3 m side is parallel to the water surface. Determine the hydrostatic force and the centre of pressure if the top edge of the plate is a) Touching the water surface .b )2 m below the water surface
The 100cm radius cylinder weighs 3.1 KN and rest on the bottom of a container which is 1.5 meter long. Oil and water are poured into the left and right portion of the container to the depth of 0.8m and 1.4m respectively. Find the magnitude of the horizontal and vertical components of the force which will keep the cylinder touching the container at B.
How can I get the solutions for this problem? (answers are given) If the upper base of the vertical rectangular plate with ( height =10ft and base= 5ft) is submerged 12ft below the water's surface, determine the hydrostatic force and the location of the center of pressure. (Answers: 53040 lbf and 17.4902 ft)
An oil tanker 3m wide 2 m deep and 10 m long contains oil of density 800 kg/m3, if the tanker is closed and completely filled with the oil and accelerated horizontally at 3m/s2. a.) determine the total liquid thrust (hydrostatic force) on the front end. (in kN) b.) determine the total liquid thrust (hydrostatic force) on the rear end. (in kN)
Solve Correctly A cylinder object is suspended in a liquid at a distance of 38cm below the surface. The diameter of the object is 140cm and the density of the object is 960 kg/m3. The density ratio is 1. Determine the height of the cylinder, if the buoyant force is 7N.
A cylindrical tank of 1.5 m diameter and height 0,75 m has a hemispherical dome. The tank contains oil of relative density 0.84. The dame is joined to cylinder position by four equally spaced bolts. If pressure gauge at point M, 0.3 m above base of tank read 50 kPa. Determine force each bolt.
The door of a jet liner has dimension of 2.3m x 1.2m. if the inside pressure of cabin is 100kpaa , what force is exerted on the door when the plane flies at an altitude where the outside pressure is 15 kpaa.
A 20-cm-diameter vertical cylindrical vessel is rotated about its vertical axis at a constant angular velocity of 70 rad/s. If the pressure at the midpoint of the inner top surface is atmospheric pressure like the outer surface, determine the total upward force acting upon the entire top surface inside the cylinder.