A long water channel is covered with an aluminum cover 8 mm thick and 240 mm wide. The water flowing in the channel is at 24°C and has a heat transfer coefficent of hw = 275 W/m2 · K. The top of the cover is exposed to air at 24°C, and a heat transfer coefficient ha = 12 W/m2 · K. If the two sides of the aluminum cover are kept at 95°C, find a) Temperature at the middle of the aluminum cover b) Heat transferred to water per unit length of cover c) Heat transferred to air per unit length of Cover

A long water channel is covered with an aluminum cover 8 mm thick and 240 mm wide. The water flowing in the channel is at 24°C and has a heat transfer coefficent of hw = 275 W/m2 · K. The top of the cover is exposed to air at 24°C, and a heat transfer coefficient ha = 12 W/m2 · K. If the two sides of the aluminum cover are kept at 95°C, find a) Temperature at the middle of the aluminum cover b) Heat transferred to water per unit length of cover c) Heat transferred to air per unit length of Cover

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Hot water is flowing at an average velocity of1.5 m/s through a cast iron pipe (k = 52 W/m·K) whose innerand outer diameters are 3 cm and 3.5 cm, respectively. Thepipe passes through a 15-m-long section of a basement whosetemperature is 15°C. If the temperature of the water dropsfrom 70°C to 67°C as it passes through the basement and theheat transfer coefficient on the inner surface of the pipe is400 W/m2·K, determine the combined convection and radiationheat transfer coefficient at the outer surface of thepipe.
There are 3 windows in a room with a width of 100 cm and a height of 150 cm.There is a single glass (k=0. 9 W/mK) of 5 mm thickness in the windows initially. Instead of these glasses to save heatYou are considering replacing it with double glazing consisting of 5 mm glass and 12 mm air (k=0.022 W/mK). Indoor and outdoor environmenttemperatures are 20 0C and -10 0C, respectively, and the heat transfer coefficients are 7 W/m2 K and 25 W/m2 K. The total heat loss in the room is 3.5 kW.when switching to double glazing;a) Find the decrease in heat transfer. b) Considering that the heat given by the heaters remains 3.5 kW, what would the room temperature be?
Two pin fins are identical, except that the diameter of one of them is twice the diameter of the other. For which fin is the (a) fin effectiveness and (b) fin efficiency higher? Explain.
....A journal bearing is to be used for a centrifugal pump where the shaft diameter is 50 mm and the bearing length is 80 mm. The ambient and bearing surface temperatures are 20°C and 45°C, respectively. Which of the following is the heat dissipated by the bearing if the heat dissipation coefficient is 280 W/m2-°C? Group of answer choices 56 W 14 W 73 W 28 W
Consider a steam pipe of length 15 ft, inner radius 2 in., outer radius 2.4 in., and thermal conductivity 7.2 Btu/hr-ft-°F. Steam is flowing through the pipe at an average temperature of 250°F, and the average convection heat transfer coefficient on the inner surface is given to be 1.25 Btu/hr-ft2-°F. If the average temperature on the outer surfaces of the pipe is 160°F, determine the rate of heat loss from the steam through the pipe. ANSWER:______Btu/hr
/ Hot square plate (1 m ×1 m) is to be cooled by attaching aluminum circular pin fins (D=0.25 cm, L= 3 cm) distributed with distance 0.6 cm as illustrated in Figs.(1-a) & (1-b). If the fin base temperature is 100°C, cooling air temperature is 30°C and h= 35 W/m. °C. Determine the total rate of heat transfer from the finned plate and the effectiveness of the fins? Assume k= 237 W/m.°C and nr=tanh mL/ mL.
Consider a person standing in a breezy room at 20°C. Determine the total rate of heat transfer from this person if the exposed surface area and the average outer surface temperature of the person are 1.6 m2 and 29°C, respectively, and the convection heat transfer coefficient is 6 W/m2 ·°C (Fig. 2–75).
A Gasoline engine operating on an air standard condition has a clearance volume of 15cm3 and a displacement volume of 100cm3 . Determine the theoretical thermal efficiency of the engine.
Pulverized coal particles are used in oxy-fuel combustion power plants for electricity generation. Consider a situation where coal particles are suspended in hot air flowing through a heated tube, where the convection heat transfer coefficient is 100 W/m2·K. If the average surface area and volume of the coal particles are 3.1 mm2 and 0.5 mm3, respectively, determine how much time it would take to heat the coal particles to two-thirds of the initial temperature difference.
The walls of the refrigerated storage room are 10 m long and 3 m high and constructed with 90 mm concrete blocks (k = 0.935 W / [m ° C]) and 12 cm fiber insulation board (k = 0.048 W). / [m ° C]). The temperature of the cold room is -10 ° C and the convective hot coupling is 40 W / (m² K); The outside air temperature is 30 ° C with a convection heat transfer coefficient of 10 W / (m² K). Calculate the total heat wave. Total heat transfer coefficient = Answer W / (m² K).
To cool a storehouse in the summer without using a conventional air-conditioning system, the owner decided to hire an engineer to design an alternative system that would make use of the water in the nearby lake. The engineer decided to flow air through a thin smooth 10-cm-diameter copper tube that is submerged in the nearby lake. The water in the lake is typically maintained at a constant temperature of 15°C and a convection heat transfer coefficient of 1000 W/m2?K. If air (1 atm) enters the copper tube at a mean temperature of 30°C with an average velocity of 2.5 m/s, determine the necessary copper tube length so that the outlet mean temperature of the air is 20°C.
A 2-m x 1.8-m section of wall of an industrial furnace burning natural gas is not insulated, and the temperature at the outer surface of this section is measured to be 80°C. The temperature of the furnace room is 30°C, and the combined convection and radiation heat transfer coefficient at the surface of the outer furnace is 10 W/m² • °C. It is proposed to insulate this section of the furnace wall with expanded perlite insulation (k = 0.052 W/m • °C) in order to reduce the heat loss by 90%. Assuming the outer surface temperature of the metal section still remains at about 80°C, determine the thickness of the insulation that needs to be used. ANSWER:_______cm