beingvertical.theA Masonary Dam 8 m high, 1.5m wide at the top and 5m wide at the Base,retains water to a depth of 7.5 m, the water face of the damIf the weight of water is 9.81 KN/m², weight of Masonary is 22 KN/m³,maximum intensity of stress developed at the base will be@ 196 KN/m².182 KN/m2160 KN/m²148 KN/m²nearly.

Answered: Image /qna-images/answer/6e4579ab-aa95-4422-8679-d3c54111e8f3.jpg

A Masonary Dam &m high, 1.5m wide at the top and 5m wide at the Base retains water to a depth of 7.5 m, the water face of the dam being If the weight of water is 9.81 KN/m², weight of Masonary is 22 KN/m³, the vertical. maximum intensity of stress developed at the base will be nearly. @196 KN/m². 182 KN/m2 160 KN/m² 148 KN/m2

A Masonary Dam &m high, 1.5m wide at the top and 5m wide at the Base retains water to a depth of 7.5 m, the water face of the dam being If the weight of water is 9.81 KN/m², weight of Masonary is 22 KN/m³, the vertical. maximum intensity of stress developed at the base will be nearly. @196 KN/m². 182 KN/m2 160 KN/m² 148 KN/m2

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A masonry dam of trapezoidal cross section, with one face vertical, has a thickness of 1m at the top and 3m at the bottom. It is 7m high and has horizontal base. The vertical face is subjected to water pressure, the water standing 4.5m above the base. The weight of the masonry is 23.5kN/cu.m. Assuming no hydrostatic uplift, where will the resultant pressure intersect the base, and what will be the intensity of pressure at the heel and toe.
Find the pressure force acting on a dam 20 meters wide and 7 meters high and the place of action of this force (pressure center) with the pressure prism. (γ = 9.79 kN / m^3
A trapezoidal cross-section mansonry dam (sg=2.4) with one vertical and one horizontal base is 24 meters high. It has a crest width of 2 meters and a base width of 12 meters. If the resultant pressure contacts the base and the outer edge of the middle third, or 2m from the centre of the base, what should be the vertical depth of the water? There is no hydrostatic pressure. Answer: h= 21.4m
A concrete gravity dam has the following data: Maximum water level = 300.00 m Bed level = 220.00 m R.L top of dam = 304.00 m %3D The d/s slope of 0.67:1 starts at RL of 295.00 m U/s face is vertical. Center line of the drainage gallery = 8.0 m from u/s face. Consider only weight of dam, water pressure and uplift pressure. Calculate only the normal stresses at the toe and heel of the dam, assuming 100% uplift pressure at the h eel and 50% at the gallery and zero at the toe.
A concrete dam of trapezoidal cross section, with one face vertical has a thickness of 0.60 m at the top and 4.2 m at the bottom. It is 7 meters high and has a horizontal base. The vertical face is subjected to a water pressure, the water standing 6 m above the base. The weight of concrete is 24 kN/m³ per meter length of the dam, evaluate: a. Hydrostatic force acting on the wall. b. The resisting moment of the dam to overturning in kN-m. c. Factor of safety for sliding. d. Factor of safety against overturning.
A masonry dam of trapezoidal cross section, withone face vertical has a thickness of 60 cm at the top,3.70 m at the base, and has a height of 7.40 m.What is the depth of water on the vertical face ifthe resultant intersects the base at the downstreamedge of the middle third? Assume that the upliftpressure varies uniformly from full hydrostatic atthe heel to zero at the toe. Follow the steps: Step 1. Solve for all the forces. Step 2. Solve for Rx and Ry. Step 3. Solve for RM and OM. Step 4. Solve for x, where we will get the value of h or the depth of water. Note: The answer must be near or exactly 5.83m.
A masonry dam of trapezoidal cross section, with one face vertical has thickness of 60cm at the top, 3.70m at the base, and has a height of 7.40m. What is the depth of water on the vertical face if the resultant intersects the base at the downstream edge of the middle third? Assume that the uplift pressure varies uniformly from full hydrostatic at the heel to zero at the toe
A triangular dam has a vertical upstream face 35m high from the horizontal base. The depth of water is 30m on the vertical face. If concrete weighs 23.5kN/m^3, determine the minimum width of the base such that the resultant force falls within the middle thirds, neglecting hydrostatic uplift.
A masonry dam has a coefficient of permeability in the vertical and horizontal directions of kz=4m/day and kx=5m/day, respectively. The difference in the head is 18 m and the distance between the base of the dam and the downstream water surface is 18m. Assume z=35 m and width of Dam =40m Determine a) the seepage flow b) the uplift pressure (kpa)at point A C) the uplift force (Kn) acting in the dam. assume that the uplift pressure under the dam varies uniformly
A trapezoidal channel is discharging 20.40 m^3/sec at a depth of 1.2 m and a base width of 6 m. The side slope is 2 horizontal to 1 vertical. n = 0.014. Compute the slope of the energy grade line. a. 0.00094 b. 0.00015 c. 0.00021 d. 0.00124 compute the specific energy. a. 1.10 m b. 1.84 m c. 1.62 m d. 1.41 m compute the average shearing stress on the boundary surface. a. 3.50 Pa b. 8.18 Pa c. 7.11 Pa d. 5.04 Pa
Determine the pressure intensity at the heel of a trapezoidal dam having a dimension of 4 m on top, 18 m at the bottom and 24 high with water 20 m deep on its vertical side. Unit weight of the concrete is 23.9 kN/m^3. No hydrostatic uplift.
The soil pressure distribution along the base of the gravity dam is triangular, with maximum stress at the toe and zero at the heel. If the eccentricity of the resultant force is 1 m, thern the length of the base is: a.7 m b.8 m c.6 m d.9 m