=Figure 2 shows a rectangular shallow foundation. The foundation measures 1.5 m x3 m(B x L) in plan. The clay layer is normally consolidated with: Ce=0.27; He 3 m; e0.92; average effective stress on the clay layer due to applied foundation load Ao=24kN/m². Determine the primary consolidation settlement of the foundation.SandY = 16.5 kN/m³SandYat 17.8 kN/m³Normally consolidated clayYsat18.2 kN/m³= 0.92; C = 0.27170 kN/m²1m1.5 mGround water table------15 m3 m

= Figure 2 shows a rectangular shallow foundation. The foundation measures 1.5 m x3 m (B x L) in plan. The clay layer is normally consolidated with: Ce=0.27; He 3 m; e 0.92; average effective stress on the clay layer due to applied foundation load Ac=24 kN/m². Determine the primary consolidation settlement of the foundation. Sand Y = 16.5 kN/m³ Sand Yat 17.8 kN/m³ Normally consolidated clay Ysat 18.2 kN/m³ = 0.92; C = 0.27 170 kN/m² 1m 1.5 m Ground water table --- --- 15 m 3 m

= Figure 2 shows a rectangular shallow foundation. The foundation measures 1.5 m x3 m (B x L) in plan. The clay layer is normally consolidated with: Ce=0.27; He 3 m; e 0.92; average effective stress on the clay layer due to applied foundation load Ac=24 kN/m². Determine the primary consolidation settlement of the foundation. Sand Y = 16.5 kN/m³ Sand Yat 17.8 kN/m³ Normally consolidated clay Ysat 18.2 kN/m³ = 0.92; C = 0.27 170 kN/m² 1m 1.5 m Ground water table --- --- 15 m 3 m

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter17: Settlement Of Shallow Foundations

Section: Chapter Questions

Problem 17.6P

See similar textbooks

Similar questions

A rectangular footing (4.14 x 4.43 m) is placed 1.38 m below the ground surface. The soil arrangement is composed of sand (ground) for the first 6.29 m and followed by clay for the next 5.94 m. The force acting on the footing is 10581 kN. Determine the resulting stress increase at the midheight of the consolidating layer in kPa. Assume 2V:1H pressure diagram. Unit weight of sand = 16.8 kn/m3. Unit weight of clay = 18.4 kn/m3
Refer to Figure 7.1. A flexible foundation measuring 1.5 m x 3 m is supported by a saturated clay. Given: Df = 1.2 m, H = 3 m, Es (clay) = 600 kN/m2, and qo = 150 kN/m2. Determine the average elastic settlement of the foundation.
(b) Figure Q2 (b) shows the ring foundation to support a silo. Given R1 = 3 m while R2 =6 m. The total vertical load is 7500 kN. (i) Calculate and plot the vertical stress increase with depth up to 7 m (use 1 minterval) under the centre of the ring (point O).(ii) Determine the maximum vertical stress increase and its location.
Solve Problem 7.8 using Eq. (7.29). Ignore the post-construction settlement. 7.8 Solve Problem 7.4 with Eq. (7.20). Ignore the correction factor for creep. For the unit weight of soil, use γ = 115 lb/ft3. 7.4 Figure 7.3 shows a foundation of 10 ft × 6.25 ft resting on a sand deposit. The net load per unit area at the level of the foundation, qo, is 3000 lb/ft2. For the sand, μs = 0.3, Es = 3200 lb/in.2, Df = 2.5 ft, and H = 32 ft. Assume that the foundation is rigid and determine the elastic settlement the foundation would undergo. Use Eqs. (7.4) and (7.12).
A 300 mm 450 mm plate was used in carrying out a plate loading test in a sand, during which the plate settled 5 mm under the applied pressure of 250 kN/m2. a. What is the coefficient of subgrade reaction for a 300 mm wide square plate? b. What would be the coefficient of subgrade reaction of a 2 m 3 m foundation?
Consider a continuous foundation of width B = 1.4 m on a sand deposit with c = 0, = 38, and = 17.5 kN/m3. The foundation is subjected to an eccentrically inclined load (see Figure 6.33). Given: load eccentricity e = 0.15 m, Df = 1 m, and load inclination = 18. Estimate the failure load Qu(ei) per unit length of the foundation a. for a partially compensated type of loading [Eq. (6.89)] b. for a reinforced type of loading [Eq. (6.90)]
A rectangular footing (4.89 x 4.38 m.) is placed 1.21 m. below the ground surface. The soil arrangement is composed of sand (ground) for the first 6.52 meters and followed by clay for the next 6.98 meters. The force acting on the footing is 10,293 kN. Determine the resulting stress increase at the midheight of the consolidating layer in kPa. Assume a 2V:1H pressure diagram. Unit weight of sand = 16.1 kN/m3. Unit weight of clay = 18.7 kN/m3. Use stored value. Answer in five decimal places.
A rectangular footing (4.55 x 4.8 m.) is placed 1.42 m. below the ground surface. The soil arrangement is composed of sand (ground) for the first 5.55 meters and followed by clay for the next 5.98 meters. The force acting on the footing is 10,647 kN. Determine the settlement of the consolidating layer in mm. Assume a 2V:1H pressure diagram. Unit weight of sand = 16.7 kN/m3. Clay has the following properties: unit weight = 18.9 kN/m^3, void ratio=30, liquid limit = 43
a 6m square foundation exerts a uniform pressure of 300kPa on a soil.Determine a.vertical stress increments due to the foundation load to a depth of 10m below its center
A shallow foundation 25 x 18 m carries a uniform pressure of 175 k N / m 2 . Determine the vertical stress at a point 12 m below the mid-point of one of the longer sides ( a ) using influence factors. (b) by means of Newmark's chart.