A mixing chamber operates at steady state with liquid water entering (inlet-1) at 8 bar, 40 °C, and a mass flow rate of 60 kg/s. A separate stream of water enters (inlet-2) as a liquid-vapor mixture at 8 bar with a quality of 95%. Saturated liquid at 8 bar exits the chamber at (exit-1). Ignore heat transfer with the surroundings, neglect kinetic and potential energy effects: a) Draw a schematic diagram of the device indicating the inlet and exit states. b) Write the mass balance for the above device. c) Formulate and Solve to find the mass flow rate (at inlet-2), in kg/s. Activ

A mixing chamber operates at steady state with liquid water entering (inlet-1) at 8 bar, 40 °C, and a mass flow rate of 60 kg/s. A separate stream of water enters (inlet-2) as a liquid-vapor mixture at 8 bar with a quality of 95%. Saturated liquid at 8 bar exits the chamber at (exit-1). Ignore heat transfer with the surroundings, neglect kinetic and potential energy effects: a) Draw a schematic diagram of the device indicating the inlet and exit states. b) Write the mass balance for the above device. c) Formulate and Solve to find the mass flow rate (at inlet-2), in kg/s. Activ

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Air enters a compressor operating at steady state at 15 lbf/in.2, 80°F and exits at 375°F. Stray heat transfer and kinetic and potential energy effects are negligible.Assuming the ideal gas model for the air, determine the maximum theoretical pressure at the exit, in lbf/in.2
A feed water heater operating in steady state has 2 inlets and 1 outlet. Liquid water enters. from the 1st inlet with 7 bar pressure, 42°C temperature and 70 kg/s mass flow.From the inlet 2, a liquid-steam mixture enters to the system with 98% quality and 7 bar pressure. Saturated liquid comes out from the outlet at 7 bar pressure.Heat transfer with the environment, kinetic and potential energy effects are neglected. Find the mass flow entering the 2nd inlet. Find the mass flow entering from the 2nd inlet. (kg/s)
Argon gas flows through a well-insulated nozzle at steady state. The temperature and velocity at the inlet are 570oR and 150 ft/s, respectively. At the exit, the temperature is 460oR and the pressure is 40 lbf/in2. The area of the exit is 0.0085 ft2. Use the ideal gas model with k = 1.67, and neglect potential energy effects. Determine the velocity at the exit, in ft/s, and the mass flow rate, in lb/s.
Air enters a horizontal, constant-diameter heating duct operating at steady state at 280 K, 1 bar, with a volumetric flow rate of 0.25 m3/s, and exits at 325 K, 0.95 bar. The flow area is 0.05 m2.Assuming the ideal gas model with k = 1.4 for the air, determine:(a) the mass flow rate, in kg/s,(b) the velocity at the inlet and exit, each in m/s, and(c) the rate of heat transfer to the air, in kW.
Steam enters a one-inlet, two-exit control volume at location (1) at 360°C, 100 bar, with a mass flow rate of 2 kg/s. The inlet pipe is round with a diameter of 5.2 cm. Fifteen percent of the flow leaves through location (2) and the remainder leaves at (3). For steady-state operation, determine the inlet velocity, in m/s, and the mass flow rate at each exit, in kg/s.
Liquid water flows isothermally at 20°C through a one-inlet, one-exit duct operating at steady state. The duct’s inlet and exit diameters are 0.02 m and 0.07 m, respectively. At the inlet, the velocity is 10 m/s and pressure is 1 bar.At the exit, determine the mass flow rate, in kg/s, and velocity, in m/s. m2 = ? v2 = ?
Refrigerant 134a enters an insulated diffuser as a saturated vapor at 80 deg F with a velocity of 800 ft/s. The inlet area is 1.4 in^2. At the exit, the pressure is 400 lbf/in2 and the velocity is negligible. The diffuser operates at steady state and potential energy effects can be neglected. Determine the mass flow rate, in lb/s, and the exit temperature, in deg F.
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -12oC with a volumetric flow rate of 0.18 m3/s. Refrigerant exits at 8 bar, 70oC. Changes in kinetic and potential energy from inlet to exit can be ignored.Determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kW.
4. Air enters a compressor operating at steady state at a pressure of 1 bar, a temperature of 290 K, and a velocity of 6 m/s through an inlet with an area of 0.1 m2. At the exit, the pressure is 7 bar, the temperature is 450 K, and the velocity is 2 m/s. Heat transfer from the compressor to its surroundings occurs at a rate of 180 kJ/min. Employing the ideal gas model, calculate the power input to the compressor, in kW.
Refrigerant 22 flows through a horizontal tube having an inside diameter of 4 cm. Therefrigerant flows at steady state and at the entrance to the tube it has with a quality of 0.3,temperature of 28°C, and velocity of 8 m/s. The refrigerant exits the tube as a saturatedliquid at 14 bar.Question:Determine:(a) the mass flow rate of the refrigerant, in kg/s.(b) the velocity of the refrigerant at the exit, in m/s.(c) the rate of heat transfer, in kW, and its associated direction with respect to therefrigerant
Air with a mass flow rate of 3 kg/s enters a horizontal nozzle operating at steady state at 400 K, 300 kPa, and velocity of 2.5 m/s. At the exit, the temperature is 250 K and the velocity is 400 m/s. Using the ideal gas model for air with constant cp = 1.011 kJ/kg · K, determine a. the area at the inlet, in m2. b. the heat transfer between the nozzle at its surroundings, in kW. Specify whether the heat transfer is to or from the air.
A steam turbine operates with an inlet condition of 30 bar, 400 °C, 160 m/s and an outletstate of a saturated vapour at 0.7 bar with a velocity of 100 m/s. The mass flow rate is1200 kg/min and the power output is 10800 kW. Present the process on the T-v diagram.Determine the magnitude and direction of the heat-transfer rate in kJ/min if the potentialenergy change in negligible.