A mixture of methanol (CH,OH, Mw=32.04) and ethanol (CH;OH, Mw =46.07) is flowing through a circular pipe at a flow rate of 3.0 m/s. The mixture contains 30.0 wt% methanol and 70.0 wt% ethanol. The spe- cific gravity of the mixture is 0.80. If the inside diameter of the pipe is 0.10 m, what is the flow rate of the mixture in kg/s, kmol/s?

A mixture of methanol (CH,OH, Mw=32.04) and ethanol (CH;OH, Mw =46.07) is flowing through a circular pipe at a flow rate of 3.0 m/s. The mixture contains 30.0 wt% methanol and 70.0 wt% ethanol. The spe- cific gravity of the mixture is 0.80. If the inside diameter of the pipe is 0.10 m, what is the flow rate of the mixture in kg/s, kmol/s?

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

2.1 Air having a density of 1.01 kg/m3 and absolute viscosity of 1.79 x 10-4 poise (1.79 x 10-5 Pa-s) flows through a 30.48-cm diameter pipe at the rate of 1814.0 kg/hr. Determine the type of flow existing in the pipe. 2.2 A pipe hose should deliver at least 1 200 lpm. If the nozzle has a diameter of 30 mm, what is the velocity of the issuing jet?
The pipe is 25mm with friction factor of 0.022. The second tank is vented. H1=1.4m H2=4.5m H3=1.0m X1=14.9m X2=2.7m Calculate the pressure(kPa) above the gasoline in the first tank that will result in a flowrate of 400 liters/min.
A closed tank contains liquified butane gas whose specific gravity is 0.60. The tank pressure is 1.7 Mpa gage which is also the equilibrium vapor pressure of butane at the pumping temperature. Suction lines losses is 1.5m of gas and the static elevation gain is 4m. What is the NET POSITIVE SUCTION HEAD AVAILABLE?(NPSHa)
A sprinkler head has a discharge rate of 22.5 gal./min and a coefficient K = 5.65. What pressure is required at the sprinkler head?
A pipe hose should deliver at least 1200 lpm. If the nozzle has a diameter of 30 mm, what is the velocity of the issuing jet?
Estimate the transition length in a 3.5-inch SCH 40 pipe, if the Reynolds number of the flow is 2400
The difference in energy grade line between inlet and outlet is 20 cm when Ethyl Alcohol (specific gravity = 0.79 and viscosity = 1.19 x 10-3 Pa.s) is flowing under laminar conditions through a 5 m long horizontal pipe of 5 cm diameter. The flow rate (in m3/s) is most nearly? laminar conditions: Re<2,000 Re=(density*V*d)/(viscosity)=(density*(Q/A)*d)/viscosity
It is required to pump water at the rate of 8.750 gpm from a reservoir whose surface is at an elevation of 180 ft to a tank whose bottom is at an elevation of 372 ft, The pump is placed at an elevation of 192 ft, the diameter of the suction pipe is 30 inch, the length of the pipe from the pump to the tank is 290 ft, and the estimated size of this pipe is 24 inch. The sum of the minor head losses in the suction and discharge pipe may be taken as 1.5 ft, if the maximum depth of water in the tank is to be 25 ft, what is the required horsepower of a pump for which the overall efficiency is 67 percent? Assume head loss due to friction in 290 ft + 2 ft Neglect all other head losses.
A fluid is flowing in a pipe 8 inches in diameter with a mean velocity of 10 feet/second. The pressure at the center of the pipe is 5 psi and the elevation of the pipe above the assumed datum is 15 ft, compute the total head in feet if the fluid is a) water, b) oil (sp gr = 0.80), c) molasses (sp gr = 1.5) and d) gas (w = 0.040 psf)
1.) SAE 10 oil at 20° (ρ=869 kg/m³, μ=8.14 × 10-2 N•s/m²) flows in a 200 mm diameter pipe. Find the maximum velocity for which the flow will be laminar.
Determine the transition length in a 3.5-inch SCH 40 pipe, if the flow has a Reynolds # of the flow of 2400
Oil flows at 62 L/s in a pipe of 175mm diameter and 50m length. SG of oil is 0.9 and viscosity is 0.04 Pa-sec. If head loss is 5.22m, determine: