A nozzle with a radius of 0.250 cm is attached to a garden hose with a radius of 750 cm. The flow rate through hose and nozzle is 0.0009 m3/s. Calculate the speed of the water (a) in the hose and (b) in the nozzle.

A nozzle with a radius of 0.250 cm is attached to a garden hose with a radius of 750 cm. The flow rate through hose and nozzle is 0.0009 m3/s. Calculate the speed of the water (a) in the hose and (b) in the nozzle.

College Physics

1st Edition

ISBN:9781938168000

Author:Paul Peter Urone, Roger Hinrichs

Publisher:Paul Peter Urone, Roger Hinrichs

Chapter12: Fluid Dynamics And Its Biological And Medical Applications

Section: Chapter Questions

Problem 53PE: Calculate the Reynolds numbers for the flow of water through (a) a nozzle with a radius of 0.250 cm...

See similar textbooks

Related questions

Q: A large storage tank, open to the atmosphere at the top and filled with water, develops a small hole…

A: According to Bernoulli's equation of motion, P+12ρV2+ρgh=constant where P=pressure energy per unit…

Q: A large container, 122 cm deep is filled with water. If a small hole is punched in its side 81.0 cm…

Q: A large storage tank, open to the atmosphere at the top and filled with water, develops a small hole…

A: Following values are given in this question: The hole is having depth = 16 m Now, Using the…

Q: A large storage tank, open at the top and filled with water, develops a small hole in its side at a…

A: Fluids are the materials that have the special property of being able to flow. The fluids are…

Q: A jet of water squirts out horizontally from a hole near the bottom of the tank shown in the figure.…

Q: A shower head has 20 circular openings, each with radius 0.80 mm . The shower head is connected to a…

A: Radius of the circular openings (r)=0.8 m Radius of pipe (R)=0.98 m Speed of water in the pipe…

Q: A large storage tank, open to the atmosphere at the top and filled with water, develops a small hole…

A: Depth below the water level, h = 13.4 mFlow rate, Q = 2.9×10-3 m3/minAcceleration due to gravity, g…

Q: A large container, 124 cm deep is filled with water. If a small hole is punched in its side 81.0 cm…

Q: The face of a dam adjacent to the water is vertical and its shape is in the form of an isosceles…

A: Width of dam, b= 250 m height of dam = 100 m Actual height of water in dam= 100-20 m= 80 m Density…

Q: A nozzle with an area of 0.3 cm² is attached to a garden hose with an area of 1.5 cm². The flow rate…

A: The expression for flow rate is, Q=Av (I) A=area,v=velocity,Q=flow rate The…

Q: The Venturi tube as shown in the figure may be used as a fluid flowmeter. Suppose the device is used…

A: Density of gasoline, ρ=700 kg/m3∆P=P1-P2=51.2 kPaInlet radius,r1=2.4 cmOutlet radius,r2=1.2 cm

Q: A jet of water squirts out horizontally from a hole near the bottom of the tank shown in the figure.…

A: Let the height of the pedestal is denoted by H ,the height of the water level inside the tank is…

Q: A container of cross-sectional area 122 cm2 contains liquid of density 1.75 g/cm3 to a height of…

Q: Early barometers contained wine instead of mercury. On a day when the height h of the liquid in the…

A: The height of mercury h=750 mm=0.750 m Density of mercury ρm=13600 kg/m3 The pressure corresponds to…

Q: The volume flow rate in a small rubber water pipe is 7.99 x10−6 m3/s. If the radius of the pipe is…

Q: A horizontal pipe 12.00 cm in diameter has a smooth reduction to a pipe 6.00 cm in diameter. If the…

Q: The Venturi tube shown in the figure below may be used as a fluid flowmeter. Suppose the device is…

Q: A circular cylinder of height 1.20 m having faces of diameter 0.620 m is immersed in water of…

A: Values given in the question are as follow: hs=1.2 md=0.620 mρ=1000 kgm3Fnet=1120 NPa=1.01×105…

Q: Given that the weight density of water is 9810 N/m³ , the fluid pressure on a rectangular 2 m × 3 m…

A: The pressure inside a fluid at Depth h is, P=ρgh Here, ρ is density of fluid. The density of water…

Q: A shower head has 20 circular openings, each with radius 1.0 mm . The shower head is connected to a…

A: Given

Q: A force of 150N is applied to a hydraulic jack piston that is 0.04 m in diameter. If the piston…

Q: The Venturi tube shown in Figure P9.48 may be used as a fluid flowmeter. Suppose the device is used…

A: (a) Using the equation of continuity,

Q: A garden hose has an interior diameter of 0.85 cm inner diameter and a nozzle with a 0.35 cm…

Q: The volume flow rate in a small rubber water pipe is 7.53 x10−6 m3/s. If the radius of the pipe is…

A: Volume flow rate, Radius of the pipe,

Q: A circular cylinder of height 1.20 m having faces of diameter 0.620 m is immersed in water of…

Q: a) What is the speed of the water in the hose in cm/s? (1 L= 1000 cm3) cm/s b) What is the…

Q: You fill a 5.0 x 103 m3 bucket with water that flows from a pipe of radius 1.25 cm. If it takes 14.0…

Q: Suppose you spray your sister with water from a garden hose. The water is supplied to the hose at a…

A: Given data: Volume flow rate (Q) = 0.441×10-3 m3/s Diameter (d) = 5.63×10-3 m Required: Speed (v)

Q: A hose has a radius r=3 cm is filling a storage dam that can accommodate a volume V=919 liters. The…

A: V=Volume of water=919 LA=Area=πr2r=Radius of hose=3 cmt=Time taken=7 minutesv=Velocity of…

Q: A nozzle with a radius of 0.32 cm is attached to a garden hose with a radius of 0.92 cm that is…

Q: A large storage tank, open at the top and filled with water, develops a small hole in its side at a…

A: Recall v=2gh And volume rate flow=Av

Q: A large storage tank, open to the atmosphere at the top and filled with water, develops a small hole…

Q: A horizontal pipe widens from a radius of 0.110 m to 0.240 m. If the speed of the water is 1.30 m/s…

A: Write the equation of continuity of fluids.

Q: A huge block of wood is floating on seawater, with 60 percent of its total volume completely…

Q: A force of 295 N is applied to a hydraulic jack piston that is 0.026 m in diameter. The second…

A: GivenF1 = 295 Nd1 = 0.026 md2 = 0.19 m

Q: The density of ice is 920 kg/m3 and that of seawater is 1030 kg/m3. What percentage of the volume of…

A: Given data: Density of ice (ρice ) = 920 kg/m3 Density of seawater (ρw) = 1030 kg/m3 Required: The…

Q: A fluid with a density of 920 kg/m³ and an absolute viscosity of 1.75x103 kg/m s is passing thru a…

Q: A uniform block of height 0.310 m, floats in glycerin of density 1260.0 kg/m3. The bottom of the…

Q: Water is moving at a speed of 2.05 m/s through a hose with an internal diameter of 1.85 cm. What is…

A: Speed in the hose, Internal diameter of the hose, Fluid speed in the nozzle,

Q: A firefighter mounts the nozzle of his fire hose a distance 32.1 m away from the edge of a burning…

Q: Water flows through a circular pipe with a radius of 4cm at a speed of 5 m/s.If the radius of the…

Q: A container of cross-sectional area 107 cm2 contains liquid of density 1.75 g/cm3 to a height of…

Q: What is the flow rate of water (in m3/s) hose that can fill 1.75 L bottle in 5 seconds? Group of…

A: Given, Volume of water = 1.75 L = 1.75×10-3 m3 Time = 5s Flow rate = Volume filledTime taken

Question

Please help!

A nozzle with a radius of 0.250 cm is attached to a garden hose with a radius of
750 cm. The flow rate through hose and nozzle is 0.0009 m3/s. Calculate the speed
of the water (a) in the hose and (b) in the nozzle.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

Calculate the Reynolds numbers for the flow of water through (a) a nozzle with a radius of 0.250 cm and (b) a garden hose with a radius of 0.900 cm, when the nozzle is attached to the hose. The flow rate through hose and nozzle is 0.500 us. Can the flow in either possibly be laminar?
Figure P15.47 shows a stream of water in steady flow from a kitchen faucet. At the faucet, the diameter of the stream is 0.960 cm. The stream fills a 125-cm3 container in 16.3 s. Find the diameter of the stream 13.0 cm below the opening of the faucet. Figure P15.47
Review. The tank in Figure P15.13 is filled with water of depth d = 2.00 m. At the bottom of one sidewall is a rectangular hatch of height h = 1.00 m and width w = 2.00 m that is hinged at the top of the hatch. (a) Determine the magnitude of the force the water exerts on the hatch. (b) Find the magnitude of the torque exerted by the water about the hinges.
(a) Verify that a 19.0% decrease in laminar flow through a tube is caused by a 5.00% decrease in radius, assuming that all other factors remain constant. (b) What increase in flow is obtained from a 5.00% increase in radius, again assuming all other factors remain constant?
A horizontal pipe 10.0 cm in diameter has a smooth reduction to a pipe 5.00 cm in diameter. If the pressure of the water in the larger pipe is 8.00 104 Pa and the pressure in the smaller pipe is 6.00 104 Pa, at what rate does water flow through the pipes?
An incompressible, nonviscous fluid is initially at rest in the vertical portion of the pipe shown in Figure P15.61a, where L = 2.00 m. When the valve is opened, the fluid flows into the horizontal section of the pipe. What is the fluids speed when all the fluid is in the horizontal section as shown in Figure P15.61b? Assume the cross-sectional area of the entire pipe is constant. Figure P15.61
Suppose water is raised by capillary action to a height of 5.00 cm in a glass tube. (a) To what height will it be raised in a paraffin tube of the same radius? (b) In a silver tube of the same radius?
Water enters a smooth, horizontal tube with a speed of 2.0 m/s and emerges out of the tube with a speed of 8.0 m/s. Each end of the tube has a different cross-sectional radius. Find the ratio of the entrance radius to the exit radius.
The gravitational force exerted on a solid object is 5.00 N. When the object is suspended from a spring scale and submerged in water, the scale reads 3.50 N (Fig. P15.24). Find the density of the object. Figure P15.24 Problems 24 and 25.
Oil having a density of 930 kg/m3 floats on water. A rectangular block of wood 4.00 cm high and with a density of 960 kg/m3 floats partly in the oil and partly in the water. The oil completely covers the block. How far below the interface between the two liquids is the bottom of the block?
Review. The tank in Figure P15.13 is filled with water of depth d. At the bottom of one sidewall is a rectangular hatch of height h and width w that is hinged at the top of the hatch. (a) Determine the magnitude of the force the water exerts on the hatch. (b) Find the magnitude of the torque exerted by die water about die hinges.
Water emerges straight down from a faucet with a 1.80-cm diameter at a speed of 0.500 m/s. (Because of the construction of the faucet, there is no variation in speed across the stream.) (a) What is flow rate in cm3/s? (b) What is the diameter of the stream 0.200 m below the faucet? Neglect any effects due to surface tension.