A piston cylinder assembly contains steam. Initially, the specific internal energy (internal energy per unit mass) is equal to 2800 kJ/kg. The steam undergoes a process during which 90 kJ of heat is transferred to the steam. On the other hand, using a specific mechanism installed in the cylinder, 20 kJ of energy are transferred to the steam by work. If 10 kJ of heat is dissipated from the steam to the outside of the cylinder through the wall of the cylinder, Determine the work done by the steam on the piston. The specific internal energy at the final state is equal to 2500 kJ/kg. The mass of the steam is 7.7 kg. Select one: a. 1893 kJ b. 2410 kJ c. 1450 kJ O d. 1650 kJ

A piston cylinder assembly contains steam. Initially, the specific internal energy (internal energy per unit mass) is equal to 2800 kJ/kg. The steam undergoes a process during which 90 kJ of heat is transferred to the steam. On the other hand, using a specific mechanism installed in the cylinder, 20 kJ of energy are transferred to the steam by work. If 10 kJ of heat is dissipated from the steam to the outside of the cylinder through the wall of the cylinder, Determine the work done by the steam on the piston. The specific internal energy at the final state is equal to 2500 kJ/kg. The mass of the steam is 7.7 kg. Select one: a. 1893 kJ b. 2410 kJ c. 1450 kJ O d. 1650 kJ

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A room for four persons has two fans, each consuming 0.14 kW power and three 100 Wlamps. Ventilation air at the rate of 80 kg/h enters with an enthalpy of 85 kJ/kg and leaveswith an enthalpy of 60 kJ/kg. If each person puts out heat at the rate of 630 kJ/h, determinethe rate at which heat is to be removed by a room cooler, so that a steady state is maintainedin the room.
A fluid enters a machine at 172.1 m/s, 874.56kPa, and with a specific volume of 0.368 m3/kg. The radiation heat loss is 21.1 kJ/kg. The radiation heat loss is 21.1 kJ/kg. The internal energy decreases 480 kJ/kg. If the fluid leaves 253.03 m/s, 123.27 kPa, and 0.807 m3/kg. Determine the work done in kJ by the fluid if its mass is 1.4 kg.
A compressor draws in 0.25 m3/s of air whose density is 1.26 kg/m3 and discharges it density of 4.87 kg/m3. At the suction, P1 = 103.4 kPaa; at the discharge, P2 = 551.4 kPaa. The increase in the specific internal energy is 78.63 kJ/kg, and the heat from the air by cooling is 30.24 kJ/kg. Neglecting changes of potential and kinetic energy, determine the work on air in kW, BTU/min, and Hp.
Q19: A stationary mass of gas is compressed without friction from an initial state of 2 m3 and 2*105 N/m2 to a final state of 1 m3 and 2*105 N/m2 , the pressure remaining the same. There is a transfer of 360 kJ of heat from the gas during the a process. How much does the internal energy of the gas change
A fluid enters a machine at 169.56 m/s, 767.78 kPa, and with a specific volume of 0.103 m^3/kg. The radiation heat loss is 20.9 kJ/kg. The internal energy decreases 494 kJ/kg. If the fluid leaves at 259.36 m/s, 147.21 kPa, and 0.839 m^3/kg. Determine the work done in kJ by the fluid if its mass 3.24 kg.
A compressor draws in 0.25 m% of air whose density is 1.26 kg/m? and discharges it with a density of 4.87 kg/m°. At the suction, P, = 103.4 kPaa; at the discharge, P2 = 551.4 kPaa. The increase in the specific internal energy is 78.63 kJ/kg, and the heat from the air by cooling is 30.24 kJ/kg. Neglecting changes of potential and kinetic energy, determine the work on air in kW, BTU/min, and Hp.
The boiler of a steam generator has a total volume of 2 m3, and initially contained 1.5 m3 of water and 0.5 m3 of steam in balance at 1 kgf/cm2. The home is turned on and the water and steam from the boiler are heated. Somehow, the inlet and outlet valves of the boiler were left closed, and the safety valve will open when the pressure reaches 56 kgf/cm2. How much heat is transmitted to the water and steam in the boiler before the safety valve opens?
A piston-cylinder device initially contains 1.4 kg of refrigerant-134a at 100 kPa and 20oC. Heat is now transferred to the refrigerant from a source at 150oC, and the piston, which is resting on a set of stops, starts moving when the pressure inside reaches 120 kPa. Heat transfer continues until the temperature reaches 80oC. Assuming the surroundings to be at 25oC and 100 kPa, determine (a) the work done, (b) the heat transfer, (c) the exergy destroyed, and (d) the second-law efficiency of this process.
A compressor draws in 500cfm of air whose density is 0.079 lb/ft3 and discharges it with a density of 0.304 lb/ft3. At the suction , p1 = 15 psia; at discharge , p2= 80 psia. The increase in the specific internal energy is 33.8Btu/lb, and the heat form the air by cooling is 13 Btu. Neglecting changes in potential energy and kinetic energy, determine the work done on the air in BTu/min and Hp.
Air enters the compressor of a gas-turbine engine at 300 K and 100 kPa, where it is compressed to 700 kPa and 580 K. Heat is transferred to air in the amount of 950 kJ/kg before it enters the turbine. For a turbine efficiency of 86 percent, determine: (a) the fraction of turbine work output used to drive the compressor, (b) the thermal efficiency.Assume: constant specific heats at 300 K.Ans: 50.1%, 29.6%
Air enters the compressor of a gas-turbine engine at 300 K and 100 kPa, where it is compressed to 700 kPa and 580 K. Heat is transferred to air in the amount of 950 kJ/kg before it enters the turbine. For a turbine efficiency of 86 percent, determine: (a) the fraction of turbine work output used to drive the compressor, (b) the thermal efficiency. Assume: constant specific heats at 300K. ANS: 50.1%, 29.6%
QU3a). An ice block at -12 oC, and of mass 3kg is completely converted into steam at 120 oC. Determine the heat involved in the process. Is the heat absorbed or released?[ shc of ice =2100 J/Kg/K ; shc of water = 4200J/Kg/K; lv=2260KJ/Kg ; lf =336000J/Kg ; shc of steam =2000J/Kg/K ]