7 GC32.p I x106 notes 6 ASCb 06 notes 6 ASDGA Plate PL3/8">G mccormac nelsFacebooke.google.com/file/d/1Ry7imwGZ0HpuPvjaRolGNulyuu9bld19/viewCENG324GC32 Principles of Design Sopen with utationPlate No. 7 Tension Member - Welded ConnectionProblem 1A Plate PL3/8"x6" is welded to a gusset plate as shown in Figure 1. The A36steel has a yield stress of Fy = 36 Ksi and an ultimate tensile stress Fu = 58 ksi.Assume Ae = Ag compute the allowable strength of the plate using AllowableStress Design.PL x 6Page7 2Prへ

It is required to determine the nominal strength at yield. Pnyield=Fy×Ag Here Fy is the yield…

A Plate PL3/8"x6" is welded to a gusset plate as shown in Figure 1. The A36 steel has a yield stress of Fy = 36 Ksi and an ultimate tensile stress Fu = 58 ksi. Assume Ae = Ag compute the allowable strength of the plate using Allowable Stress Design. %3D %3D PL % x 6

A Plate PL3/8"x6" is welded to a gusset plate as shown in Figure 1. The A36 steel has a yield stress of Fy = 36 Ksi and an ultimate tensile stress Fu = 58 ksi. Assume Ae = Ag compute the allowable strength of the plate using Allowable Stress Design. %3D %3D PL % x 6

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The riveted lap connection shown consists of two(2) – PL 12 mm × 280 mm. 1. If diameter of hole equals diameter of rivet, what is the net area of edge-1-3-4-edge in square millimeters? a. 2685.5 b. 2752.5 c. 2792.4 d. 2632.96 2. If diameter of hole equals diameter of rivet, what is the net area of edge-1-2-3-4-edge in square millimeters? a. 5325 b. 4685 c. 2890 d. 3080 3. What is the limiting value of the net area for this steel element with hole (square mm) a. 2880 b. 2646 c. 2856 d. 2080 4. If allowable rupture stress in holes is Fu/2 where Fu is the ultimate strength of the plate and which is equal to 400 MPa, find the maximum allowable force P that can be applied neglecting effect of eccentricity. a. 534.5 kN b. 560.5 kN c. 546.5 kN d. 550.5 kN
A76 x 76 x6 mm angular section shown is welded to an 8 mm thick gusset plate. The length L1 is 65 mm, L2 is 125 mm, and the cross sectional area of the angle is 929 sq.mm. Fy-248MPA and Fu -400MPA. Gusset Plate Alowable Sresse Alowable tensle stress igross ara)0.00 Alowable tereile stres net area)0SOF. Allowable shear stress (net ares)0.30F. Determine the value of P based on net area using a strength reduction coefficient of 85% O 138.24 KN O 140.14 kN O 157.93 kN O 304.00 N Next
Problem. A bolted connection shown consists of two plates 300 mm x 12 mm connected by 4 - 22 mm diameter bolts. 12 mm bolts T12 mm te12 mm P 300 75 75 75 Edge distances = 75 mm %3D dnole for tensile and rupture = dp +3 mm %3D dnole for bearing strength for Lec = d + 1.5 mm Fy = 248 MPa Fu = 400 MPa %3D En 330 MPa %3D Use LRFD design method. Determine the design strength due to tensile rupture strength of plates. (kN)
a] Compute LRFD 6.) Compute ASD CIVIL STEEL DESIGN ENGINEERING- BOLTED CONNECTION Sample Problem 5: The 175 x 100 x 16 mm angle shown connected to a gusset plate with three 25 mm bolts (A490) when threads are excluded from shear planes. The angle consists of A36 steel. Properties of 4 175 x 100 x 16 A36 Steel Properties of A490 bolts A = 4181 mm² t = 16 mm Fy = 248 MPa F₁ = 400 MPa Fy = 276 MPa Nominal hole dia. = 27 mm 75 T+ 100 Gusset Plate 100 F 100
j) what is the bolt shear capacity of the flange connection in kips? (2 decimal places)A992: Fy=50ksi, Fu=65ksiA36: Fy=36ksi, Fu=58ksieffective bolt hole diameter = bolt hole + 1/16"beam properties: tw=0.38 in., bf=7.07 in., tf=0.63 in.Fexx=70ksi
QUESTION 11 3. check the capacity of the shear connection. A992: Fy=50ksi, Fu=65ksi A36: Fy=36ksi, Fu=58ksi effective bolt hole diameter = bolt hole + 1/16" beam properties: tw=0.295 in. Fexx=70ksi what is the weld capacity in kips? (2 decimal places)
2-D flat plate.
A bolted connection shown is made up of 2L150 x 100 x 9.5 mm. The angle is made of A-36 steel and the bolts have diameter of 22 mm. Properties of 2L150 x 100 x 9.5 mm: A = 4660 mm2 t = 9.5 mm Fy = 248 MPa Fu = 400 MPa Properties of 20 mm A-325 bolts: Fu = 400 MPa 50 50 50 50 50 50,50 힝힝이어 Gusset Plate 9.5mm 100mm Gusset Plate 100mm 31.25 62.5 T 56.25 a. Nominal dimension of hole diameter, dn = 25 mm b. Determine the ultimate shear capacity (kN) of the connection. c. Determine the ultimate tearing capacity (kN) of the connection if the shear lag factor, U = 0.75.
1. what is the bolt shear capacity of the shear connection in kips? (2 decimal places)A992: Fy=50ksi, Fu=65ksiA36: Fy=36ksi, Fu=58ksieffective bolt hole diameter = bolt hole + 1/16"beam properties: tw=0.38 in., bf=7.07 in., tf=0.63 in.Fexx=70ksi
10) what is the bolt shear capacity of the flange connection in kips? (2 decimal places). A992: Fy=50ksi, Fu=65ksiA36: Fy=36ksi, Fu=58ksieffective bolt hole diameter = bolt hole + 1/16"beam properties: tw=0.38 in., bf=7.07 in., tf=0.63 in.Fexx=70ksi
Question No.3: Determine the maximum tensile force, Pu, that can be applied to the connection shown in figure below based on the bolt strength; assume ASTM A36 steel for the following bolt types in standard holes: Check every limit state. a. 1-in.-diameter A325N, b. 7/8-in.-diameter A490X. 3" 3" 1½" /" plate ½P, P ½P. /" plate
5) Calculate P the allowable tensile load for the butt joint shown. Each A325-N high-strength bolt has a diameter of 0.9 inches. The plates are made of ASTM A36 steel. If the applied load is 200 kips, is this connection adequate? If not, what needs to be changed so that this connection can handle an applied load of 200 kips? P- ФФ P ! 12"x " P. P.