A Rectangular Beam 350 mm wide has an effective depth of 600mm. It is reinforced with 2-28 mm on the compression and 4-36mm on the tension side. Using a steel cover of 60mm, fc'=20.7 MPa and fy=345 MPa. Determine the distance of the neutral axis from the outermost compression fiber. A 150.23mm 120.32mm 122.32mm D 159.10mm

A Rectangular Beam 350 mm wide has an effective depth of 600mm. It is reinforced with 2-28 mm on the compression and 4-36mm on the tension side. Using a steel cover of 60mm, fc'=20.7 MPa and fy=345 MPa. Determine the distance of the neutral axis from the outermost compression fiber. A 150.23mm 120.32mm 122.32mm D 159.10mm

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A box beam is constructed from four pieces of wood, glued together as shown. If the moment acting on the cross-section is 12 kN-m, determine the flexural stress in MPa at point A Where: tw = 22 mm; and d = 293 mm
A cantilever beam, 6m long, fixed at point A and free at point B, is subjected to a downward uniform load 50 kN/m throughout the beam. a. Determine the slope of A wrt B. b. Determine the slope of B wrt A.
A rectangular doubly-reinforced beam 450 mm wide and reinforced by 5-32mm diameter bars for tension and 3-28 mm diameter bars for compression and has the following properties: (NSCP 2010) d = 650 mm d’ = 70 mm f’c = 20.7 MPa fy = 344.80 MPa a. Find the depth of compression block. b. Find the ultimate moment capacity of the beam.
3.) For the given couple-force system shown, determine the horizontal component of Q. P= 335 KN Q= 44 KN R=74 KN-m Z=263 KN
The beam is 8m long. Let P = 40 kN, Q = 4 kN/m, L =8m. Find: 1. Slope at L/3. 2. Deflection at L/3.
The beam is 7m long with EI = 200MNm^2 Let P = 10 kN Find: 1. Slope at 2m from A. 2. Deflection at 2m from A.
A rectangular beam has the following properties: b = 300 mm, d = 350 mm, tension bars As = 4-28mmØ,compression bars As’ = 2-28 mmØ, d’ = 60 mm. Fc’ = 30 MPa and fy = 345 MPa Determine the design strength of the beam.a. 233.155 kN.m. c. 636.511 kN.m.b. 332.511 kN.m. d. 755.321 kN.m. Calculate the ultimate axial load capacity of a round spiral column having a diameter of 400 mm reinforced with 6-20 mm Ø bars having fc’ = 24 MPa and fy = 276 MPa a. 1941.401 kN c. 1841.321 kNb. 9141.401 kN d. 8141.321 kN Please answer asap.
c. Slope at L/3. d. Deflection at L/3
g.) What is the moment of inertia (I) about the neutral axis of the section? (in mm^4) h.)What is the first moment of an area (Q) about the neutral axis of the section? (in mm^3) i.)What is the maximum shearing stress (fv) of the beam? (in MPa)
H.W The uniform thin pole has a weight of 50 N and a length of 26m. If it is placed against the rough wall and on the rough box in the position d= 10 m, us =0.3 at points A, B and C P= 150 N Box weight= 100N Determine the distanice x when the motion of the pole impend
A rectangular beam of length 702mm has a width of 132mm and a depth of301mm. Compression steel bars are placed at a distance 98 mm from the extreme concrete compressivefiber. The beam supports service dead loads of dead load (16 KN/m) and live load (24 KN/m). Reinforced with 4 25mm tension steel bars and 4 12mm tension steel bars f′c = 42 MPafy = 519 MPa 1. Solve for the height of the neutral axis measured from the extreme compression fiber.2. Solve for the design moment.3. Solve for the strength reduction factor.
For the beam and loading shown below (L = 2.4 m, E = 200 GPa, I = 1000 mm4 and w = 30 kN/m), find (a) TThe slope at point D.(b) The reaction force at end A