A reinforced concrete T-beam carries a uniformly distributed super-load on a simply- supported span of 8 m. The stresses in the steel and concrete are not to exceed 125 MN/m' and 7 MN/m², respectively. The modular ratio is 15, and the density of concrete is 2400 kg/m'. Determine the permissible super-load. (Nottingham) -100cm- 15cm 15cm Three 2.25cm bars 60 cm Six 2.25 cm bars 7,5cm 25cm

A reinforced concrete T-beam carries a uniformly distributed super-load on a simply- supported span of 8 m. The stresses in the steel and concrete are not to exceed 125 MN/m' and 7 MN/m², respectively. The modular ratio is 15, and the density of concrete is 2400 kg/m'. Determine the permissible super-load. (Nottingham) -100cm- 15cm 15cm Three 2.25cm bars 60 cm Six 2.25 cm bars 7,5cm 25cm

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Calculate the governing load combination for a secondary beam with effective width = 2.0 m Dead load Weight of slab = 3.0 kPa Ceiling services = 1.0 kPa Self-weight of beam = 1.0kN/m Imposed load - 0.2 kPa
The T-beam used in a heavy storage warehouse is made of concrete having a specific weight of 19.6 kN/m3. Determine the dead load per meter length of beam, and the live load on the top of the beam per meter length of beam. Use 20-mm dia. cold-form steel reinforcing rods.
A simply supported beam 6 m long is 350 mm wide has an effective depth of 500 mm. It supports a uniform dead load of 12 kN/m and concentrated live loads applied at the quarter points. If it is reinforced with 6 of 22 mm diameter bars, fc’ = 20.7 MPa, fy = 414 MPa, concrete weighs 23 kN/m3, the maximum value of the concentrated load is ____kN. Use concrete cover of 70 mm.
A lightweight reinforced concrete beam is 400 mm and 630 mm deep.The beam is simplysupported over a span of 7.7 m and carries a uniform dead load of 12 kN/m excluding its ownweight and a uniform live load of 12 kN/m. The beam is reinforced for tension only with six-28mm diameter bars with an effective depth to tension bars of 570 mm. fc’=20.7 Mpa, fy=344.8Mpa. Modulus of Elasticity of Concrete, Ec = 21,750 Mpa and Es = 200 GPa a. Calculate the maximum instantaneous deflection due to service loads. b. Calculate the deflection for the same loads after five years assuming that 50% of thelive load is sustained.
A cantilever beam has a span of 4 m and carries a uniformly distributed load throughout its span. bf = 0.210 m Sx = 0.002077 m3 d = 0.533 m rt = 0.053 m tf = 0.016 m Fy = 248 MPa a. Compute the allowable bending stress. b. Compute the maximum uniform load that can be carried by the beam.
A concrete framework is used to support a 125 mm reinforced concrete slab thatcarries a uniform live load of 12 kN/m2. The concrete density is 24kN/m3. The sizeof beam is 200 mm x 350 mm.There is a 125 mm thick brickwall on beam AD andCD. The walls are 3 m in height. Show the calculation of the design load of ColumnD in Figure 1.
A reinforced concrete beam having a width of 500 mm and an effective depth of 750 mm is reinforced with 5 – 25mm φ. The beam has simple span of 10 m. It carries an ultimate uniform load of 50 KN/m. Use f’c = 28 MPa, and fy = 413 MPa. What is the ultimate moment capacity of the beam in KN-m? Express your answer in two decimal places.
Problem 2: A reinforced concrete T-beam has a slab thickness of 100 mm which is supported by 6 m span length beam casts monolithically with the slab. Spacing of beams is 2.4 m on centers and has a web width of 300 mm and an effective depth of 500 mm. The beam carries a live load moment of 470 kN-m and dead load moment of 350 kN-m. Use fy = 414 MPa and f’c =21 MPa. Determine (a) Effective width of flange and (b) required area of steel bars needed in mm².
Pr - An applied load of 3.5 kN m2 is to be accommodated by a composite floor that consists of a 150 mm thick reinforced concrete slab supported by steel beams that span 5 m and are spaced at 3 m centres. Calculate the design loads on a typical internal beam using the assumption that the unit mass of the steel beams is 50 kg m1.
a reinforced concrete column of 300mm dia contains 4 bars of 22mm dia. find the total load, the column can carry, if the stress in steel and concrete is 50MPa and 3MPa respectively.
A rectangular beam 250 mm wide, 500 mm deep is reinforced at the bottom with 4-20-mm-diameter bars and at the tot with 2-16-mm bars Concrete cover to bar centroid at the top is 80 mm and at the bottom is 70 mm. Use concrete strength f’c = 27 MPa and steel yield strength fy = 415 MPa for 20-mm bars and fy = 275 MPa for 16-mm bars. Determine the design moment capacity in kN29 m of the beam in positive bending
A reinforced concrete spiral column carries dead axial load of 600 kN and a live axial load of 9000kN. f’c = 28 Mpa; fy = 415 Mpa. a. What is the factored axial load carried by the column? b. What is the minimum diameter of the column if it has a steel ratio of 0.015? c. Find the number of 20 mm diameter bar that will be used if it is the reinforcement of the column.