A rigid insulated tank is separated into two rooms by a stiff plate. Room A of 0.5 m3 contains air at 250 Kpa, 300 K and room B is 1 m3 has air at 200 Kpa, 1000 K. the plate is removed and the air comes to a uniform state without any heat transferred. find the final temp and pressure of the room.An ideal gas is 45 psig and 800F is heated in a closed container to 130 0F. What is the final pressure?An air bubble rises from the bottom of a well where the temperature is 25 0C, to the surface where the temperature is 27 0C. Find the percent increase in the volume of the bubble if the depth of the well is 5m. Atmospheric pressure is 101.528 kPaa.A 3000 cm3 tank initially contains compressed air at 600 kPag and 28 oC. Determine the mass of air to be withdrawn from the tank to reduce its pressure to 80 kPag while the temperature remains unchanged.

As per Bartleyby guidelines in case of multiple questions only 1st question need to be answered.

A rigid insulated tank is separated into two rooms by a stiff plate. Room A of 0.5 m3 contains air at 250 Kpa, 300 K and room B is 1 m3 has air at 200 Kpa, 1000 K. the plate is removed and the air comes to a uniform state without any heat transferred. find the final temp and pressure of the room.

A rigid insulated tank is separated into two rooms by a stiff plate. Room A of 0.5 m3 contains air at 250 Kpa, 300 K and room B is 1 m3 has air at 200 Kpa, 1000 K. the plate is removed and the air comes to a uniform state without any heat transferred. find the final temp and pressure of the room.

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter2: Matter And Energy

Section: Chapter Questions

Problem 30RQ: A gas is compressed inside a compressor's cylinder. When the piston is at its bottom dead center,...

See similar textbooks

Related questions

Q: A piston-cylinder assembly contains 2 kg of liquid water at 20 ° C and 100 kPa pressure. 1000 kPa…

A: Given data: The mass of liquid, m = 2 kg. The initial temperature, T1 = 20oC. The initial pressure,…

Q: Helium at 660 K expands in a turbine to 369 K during which 84 kJ/kg of heat was lost to the…

A: Guven data :- Helium gas T1 = 660 k T2 = 369 k Q = 84 KJ/Kg Pressure = 6.0 Find :- Actual…

Q: A thermodynamic cycle with 0.1 kg of air has 3 processes as in the figure. Assume air as ideal gas.…

A: As per the guidelines we will solve the first three subparts of your question. (a) From the ideal…

Q: A steam turbine receives water at 3 MPa, 400oC at a rate of 1 kg/s. The steam enters with velocity…

Q: A 4 m3 cryogenic storage tank contains nitrogen at 110 K, with quality 25%. Saturated vapor is now…

A: Given dataV=4m3T=110Kx1=25%=0.25x2=0.65 Nitrogen

Q: Helium gas expands from 150 kPa, 450 K and 0.5 m3 to 100 kPa in a polytropic process with n = 1.667.…

A: Data given- P1 = 150 kPa T1 = 450K V1 = 0.5 m3 P2 = 100 kPa n = 1.667

Q: A polytropic process of air from 150 psia, 300°F, and 1 ft occurs to P, = 20 psia in accordance with…

Q: A cycle works with one kg of air and is compressed through a polytropic process (pv12 = C) %3D from…

Q: A piston cylinder containes 0.1 kg air at 100 kpa, 126.85 C which goes through a polytropic…

A: Given data: The mass of the air is m=0.1 kg The initial pressure is P1=100 kPa The final pressure is…

Q: a polytropic process of air from 150 psia, 300 °F, and 1 ft occurs to p2 = 20 cordance with pV3 C.…

A: Hi and thanks for the question. Since you have asked questions with multiple sub-parts, we will…

Q: How much work was required (kJ)?

A: take properties from steam table here state 1 is super heated state and 2 is sub cooled state.so…

Q: Air is compressed under Constant Entropy Process from 10 Psia, 3 ft3, 90°F to 50 Psia. Find the…

Q: A cycle works with one kg of air and is compressed through a polytropic process (pv12 = C) from…

Q: A pressure cooker 6 litres in volume contains 5 kg of water, where the liquid is in equilibrium with…

A: Given data: Initial water temperature, T1=30°CFinal cooker pressure, P2=200kPa

Q: Air is expanded from 400 kPa, 600 K in a polytropic process to 150 kPa, 400 K in a piston cylinder…

A: Given Point 1 Pressure = 400 kPa Temperature = 600 K Point 2 Pressure = 150 kPa Temperature = 400 K…

Q: A cycle works with one kg of air and is compressed through a polytropic process (pyl2= C) from…

Q: 11. A polytropic process of air from 150 psia, 300°F, and 1 ft³ occurs to P2 = 20 psia in accordance…

Q: A compressor receives R-410A as saturated vapor R-410A at 400 kPa and brings it to 2000 kPa, 60°C.…

Q: A 5 m3 rigid tank has propane at 500 kPa, 700 K and connected by a valve to another tank of 0.7 m3…

Q: rigid insulated tank is separated into two rooms by a stiff plate. Room A of 0.5 m3 contains air at…

Q: Find the temperature of the following using the ideal gas law:(a) water, P=10KPa, v=30m^3/kg(b)…

A: According to question we have to use ideal gas law, but the parameters are given for water. we…

Q: and pressure ratio of the compressor and turbine is 8. If the ar are 1.0 bar and 300 K. find the…

A: Given:ηc=0.86ηT=0.90T3=1200 KT1=300 KP1=1 barrP=8γ=1.4

Q: 2. A closed constant volume system receives 10.5 kJ of paddle work. The system contains oxygen at…

A: Given data: W=10.5 kJP=344 kPaV=0.06 m3T2=400 K Need to determine the heat loss or gain by the…

Q: Please be very detailed

A: Given,

Q: helium in a steel tank is at 36 psia, 540 R with a volume of 4 ft^3 . it is used to fill a balloon.…

A: Given, State 1 conditions: P1=36 psiaT1=540 RV1=4 ft3 State 2 conditions: P2=18 psiaT2=540 R

Q: sketch the device sketch (piston/cylinder) at state 1 and 2. Plot the process on a T-s diagram and…

A: Given Data: The initial temperature of the air is T1= 27∘C. The final temperature of the air is T2…

Q: A piston/cylinder shown in Fig. P3.108 contain. 0.5 m³ of R-410A at 2 MPa, 150°C. The pistor mass…

Q: (15%) A small expander (a turbine with heat transfer) has 0.05 kg/s helium entering at 1000 kPa, 550…

Q: A factory generates compressed air from 100 kPa, 17°C by compression to 800 kPa, 500 K, after which…

Q: 1) Air is compressed under Constant Entropy Process from 10 Psia, 3 ft?, 90°F to 50 Psia. Find the…

A: Given: The mass of air, m = 1 lbm The poly-tropic index, n = 1.27 The initial pressure, P1 = 10 psi…

Q: 6.67. Helium in a piston/cylinder at 20°C, 100 kPa is brought to 400 K in a reversible polytropic…

A: Initial pressure inside the cylinder, P1=100 kPa,Temperature inside the cylinder, T1=20…

Q: 1. Steam at 10 MPa, 500°C has an ideal engine turbine that has one stage of reheat, exhaust is at…

Q: Two tanks are connected as shown in the figure, both contain water. Tank A is at 200 kPa, v = 0.5 m3…

A: Given data: PA=200 kPavA=0.5 m3/kgVA=1 m3PB=0.5 MPamB=3.5 kgTB=400°C Need to determine the final…

Q: 10%) Air in an internal-combustion engine has 227°C, 1000 kPa, with a volume of 0.1 m³. ombustion…

Q: A polytropic process with n = -1, initiates with P = V = 0 and ends with P = 600 kPa and V 0.01 m'.…

Q: A rigid insulated tank is separated into two rooms by a stiff plate. Room A of 0.5 m 3 contains air…

Q: A piston cylinder has 2.2kg of air at 300 K and 150 kPa. It is now heated up in a two step process.…

Q: 2. A two-stage air compressor has an intercooler between the two stages as shown below. The inlet…

A: P1=100 KPa inlet pressureP4=1.6 mps exit pressureT1=290 K∴For optimal pressure P2=P1 P412…

Q: One kg of steam undergoes a reversible isothermal process from 20 bar and 250°C, to a pressure of 30…

A: Pressure P1 = 20 bar Temperature T1 = 250 C Pressure P1 = 30 bar

Q: A room is divided by a barrier into two sections. One side of the room (state 1) has a volume of…

A: Given Data The initial pressure of the air is: P1=50 psi The initial volume is: V1=1000 ft3 The…

Q: Problem 4. Consider an adiabatic steam turbine operating at steady-state with a mass flow rate of 12…

A: GIVEN DATA- P1=10MPa T1=450'C C1=80m/s P2=10KPa C2=50m/s m=12kg/s

Q: A piston cylinder containes 0.1 kg air at 100 kpa, 126.85 'C which goes through a polytropic…

Q: Q2:In a steam power plant operating at steady state is supplied to the high pressure turbine at 5…

A: Given data: The pressure at point 1 is P1=5 MPa The temperature at point 1 is T1=400°C The pressure…

Q: A two-stage air compressor has an intercooler between the two stages, as shown in Figure. The inlet…

A: Let us consider, Inlet to first stage of compressor = state 1 Exit of first stage of compressor (and…

Q: Air is compressed under Constant Entropy Process from 10 Psia, 3 ft3, 90°F to 50 Psia. Find the…

Q: During an isentropic process of 3 lb/sec of air, the temperature increases from 50 deg F to 290 deg…

A: Given: The mass flow rate of the air is 3 lb/sec. The temperature increase from 50 deg F to 290 deg…

Q: The pressure inlet for air compressor is 14 psi ,60 F and the output of 140 psi at 1080 R .This…

A: We will use energy balance

Q: A piston/cylinder arrangement initially contains air at 150 kPa, 400°C. The setup is allowed to cool…

A: Given data at state 1 P1 = 150 kPa T1 = 400oC = 400 + 273 = 673 K at state 2 T2 = To = 20oC = 20 +…

Question

A rigid insulated tank is separated into two rooms by a stiff plate. Room A of 0.5 m3 contains air at 250 Kpa, 300 K and room B is 1 m3 has air at 200 Kpa, 1000 K. the plate is removed and the air comes to a uniform state without any heat transferred. find the final temp and pressure of the room.
An ideal gas is 45 psig and 800F is heated in a closed container to 130 0F. What is the final pressure?
An air bubble rises from the bottom of a well where the temperature is 25 0C, to the surface where the temperature is 27 0C. Find the percent increase in the volume of the bubble if the depth of the well is 5m. Atmospheric pressure is 101.528 kPaa.
A 3000 cm3 tank initially contains compressed air at 600 kPag and 28 oC. Determine the mass of air to be withdrawn from the tank to reduce its pressure to 80 kPag while the temperature remains unchanged.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Similar questions

A rigid insulated tank is separated into two rooms by a stiff plate. Room A of 0.5 m3 contains air at 250 Kpa, 300 K and room B is 1 m3 has air at 150 Kpa, 1000K. the plate is removed and the air comes to a uniform state without any heat transferred. find the final temp and pressure of the room.
A rigid insulated tank is separated into two rooms by a stiff plate. Room A of 0.5 m 3 contains air at 250Kpa, 300 K and room B is 1 m 3 has air at 200 Kpa, 1000 K. the plate is removed and the air comes to auniform state without any heat transferred. find the final temp and pressure of the room.
A closed constant-volume system receives 10Kj of paddle work. The system contains a nitrogen at 340kpa, 5C and occupies 0.1m^3. Find the heat in KJ (Gain or Loss) if the final temperature is 127C. Please use: Q=AU+W (Observe direction) ideal gas equation to find mass table.
3kg of Co2 expanded in a stationary piston cylinder through a polytropic process from 30 degree Celsius and 250 kpa to 100kPa pressure. If the polytropic exponent, n = 1.45, find the total work, total heat transferred, total kinetic energy change and internal energy change
100 kg/min of steam at 43 bars, 360 °C expands through a turbine isentropically until the pressure becomes 0.35 bars. Find the work in hp.
one kg of steam expands isentropically from 25mpa and 300 degrees to 0.95mpa.find the final quality and Wn and Ws
Water with a quality of 53,5% and pressure of 200 kPa is inside a rigid tank. The tank is heated by an electric heater rated as 120W for 8 minutes until the temperature reaches 250C. find quality at final state if any ?
1) Air is compressed under Constant Entropy Process from 10 Psia, 3 ft3, 90°F to 50 Psia. Find the following: a) Final volume in ft3. b) Final temperature in °F. c) Work non-flow in BTU. 2) From problem #1 Use all PVT values, What if the 1lbm of air is compressed under quasi-static process (n=1.27). Find the following: a) Work non-flow in BTU. b) Heat in BTU.
1) Air is compressed under Constant Entropy Process from 10 Psia, 3 ft3, 90°F to 50 Psia. Find the following: a) Final volume in ft3. b) Final temperature in °F. c) Work non-flow in BTU. From the problem above use all PVT values, What if the 1lbm of air is compressed under quasi-static process (n=1.27). Find the following: d) Work non-flow in BTU. e) Heat in BTU.
Steam at 120 bar has a specific volume of 0.01721 m3/kg, find the temperature, enthalpy and the internal energy.
The air conditioner in a house or a car has a cooler that brings atmospheric air from 30 degree Celsius to 10 degree Celsius, both state at 101 kPa. For a flow rate of 0.75 kg/s find the rate of heat transfer
A working fluid at 500 kPa, 400°C is in a piston-cylinder equipment with an initial volume of 0.9 m3. The fluid undergoes an expansion process which may be described as PV = constant. The final pressure is 200 kPa. Calculate the work for this process in kJ.