A rigid pavement is being designed with the same parameters as used in Problem 4.5. The modulus of subgrade reaction is 300 lb/in? and the slab thickness is determined to be 8.5 inches. The load transfer coefficient is 3.0, the drainage coefficient is 1.0, and the modulus of elasticity is 4 million 1b/in?. What is the design modulus of rupture? (Assume that any parameters not given in this problem are the same as those given in Problem 4.5.) 4.5 for reference: A flexible pavement was designed for the following daily traffic with a 12-year design life: 1300 single axles at 8000 Ib each, 900 tandem axles at 15,000 1b each, 20 single axles at 40,000 Ib each, and 200 tandem axles at 40,000 lb each. The highway was designed with 4 inches of HMA wearing surface,

A rigid pavement is being designed with the same parameters as used in Problem 4.5. The modulus of subgrade reaction is 300 lb/in? and the slab thickness is determined to be 8.5 inches. The load transfer coefficient is 3.0, the drainage coefficient is 1.0, and the modulus of elasticity is 4 million 1b/in?. What is the design modulus of rupture? (Assume that any parameters not given in this problem are the same as those given in Problem 4.5.) 4.5 for reference: A flexible pavement was designed for the following daily traffic with a 12-year design life: 1300 single axles at 8000 Ib each, 900 tandem axles at 15,000 1b each, 20 single axles at 40,000 Ib each, and 200 tandem axles at 40,000 lb each. The highway was designed with 4 inches of HMA wearing surface,

Traffic and Highway Engineering

5th Edition

ISBN:9781305156241

Author:Garber, Nicholas J.

Publisher:Garber, Nicholas J.

Chapter19: Design Of Flexible Highway Pavements

Section: Chapter Questions

Problem 11P

See similar textbooks

Similar questions

Repeat Problem 19-7 using two different depths of untreated aggregate bases of 6 in. and 12 in. Highway contractors in your area can furnish rates for providing and properly laying an asphalt concrete surface and untreated granular base. Assume a structural coefficient of 0.12 for the base course. If these rates are available, determine the cost for constructing the different pavement designs if the highway section is 5 miles long and the lane width is 12 ft. Which design will you select for construction?
A rigid pavement is designed with a 10-inch slab,an Ec of 6 million lb/in^2, a concrete modulus of rupture of 432 lb/in^2, a load transfer coefficient of 3.0, an initial PSI of 4.7, and a terminal serviceability index of 2.5.The overall standard deviation is 0.35, the modulus of subgrade reaction is 190 lb/in^3, and a reliability of 90%is used along with a drainage coefficient of 0.8. The pavement is designed assuming traffic is composed entirely of trucks (100 per day). Each truck has one 20-kip single axle and one 42-kip tandem axle (the effect of all other vehicles is ignored). A section of this road is to be replaced (due to different subgrade characteristics)with a flexible pavement having a structural number of 4 and is expected to last the same number of years as the rigid pavement. What is the assumed soil resilient modulus? (Assume all other factors are the same as for the rigid pavement.)
4.13) A rigid pavement is being designed with the same parameters as used in Problem 4.5. The modulus of subgrade reaction is 300 1b/in? and the slab thickness is determined to be 8.5 inches. The load transfer coefficient is 3.0, the drainage coefficient is 1.0, and the modulus of elasticity is 4 million Ib/in?. What is the design modulus of rupture? (Assume that any parameters not given in this problem are the same as those given in Problem 4.5.) 4.5 has been added for reference.
A rigid pavement on a new interstate (3 lanes each direction) has been conservatively designed with a 12- inch slab, an Ec of 5.5 x 106 lb/in2 , a concrete modulus of rupture of 700 lb/in2 , a load transfer coefficient of 3.0, an initial present serviceability index of 4.5, and a terminal serviceability index of 2.5. The overall standard deviation is 0.35, the subgrade CBR is 25, and the drainage coefficient is 0.9. The pavement was designed for 600 30-kip tandem axles per day and 1400 20-kip single axle loads per day. If the desired reliability was 90%, how long was this pavement designed to last?
B. A rigid pavement with a 10-inch slab thickness, 90 percent reliability, E. = 4 million lb/in², 600 lb/in² modulus of rupture, 150 lb/in³ modulus of subgrade reaction, a 2.8 load transfer coefficient, initial PSI of 4.8, final PSI of 2.5, overall standard deviation of 0.35, and a drainage coefficient of 0.8 is designed. The pavement's design life is 20 years. The three-lane road is built for vehicles with one 20,000-pound single axle, one 26,000-pound tandem axle, and one 34,000-pound triple axle. Calculate the projected daily truck traffic on the three lanes.
answer with complete solution. Asap 1. determine the safe thickness of rigid pavement if the wheel load is 85 kN and f'c = 32 MPa
How sensitive are the critical pavement responses to (a) increased tire pressure, (b) increased subgrade strength, (c) Poisson’s ratio changes, (d) lime stabilization of top 6 in. of subgrade, (e) asphalt or cement stabilization of base layer, etc
A flexible pavement has a structural number of 3.8 (all drainage coefficients are equal to 1.0). The initial PSI is 4.7 and the terminal serviceability is 2.5. The soil has a CBR of 9. The overall standard deviation is 0.40 and the reliability is 95%. The pavement is currently designed for 1800 equivalent 18-kip single-axle loads per day. If the number of 18-kip single-axle loads were to increase by 30%, by how many years would the pavement design life be reduced?
A flexible pavement has a structural number of 3.8(all drainage coefficients are equal to 1.0). The initialPSI is 4.7 and the terminal serviceability is 2.5. The soilhas a CBR of 9. The overall standard deviation is 0.40and the reliability is 95%. The pavement is currentlydesigned for 1800 equivalent 18-kip single-axle loadsper day. If the number of 18-kip single-axle loads wereto increase by 30%, by how many years would thepavement’s design life be reduced?
A flexible pavement has a SN of 4 (all drainage coefficients are equal to 1.0). The initial PSI is 4.7 and the terminal serviceability is 2.5. The soil has a CBR of 9. The overall standard deviation is 0.40 and the reliability is 95%. The pavement is currently designed for 1800 equivalent 18-kip single-axle loads per day. If the number of 18-kip single-axle loads were to increase by 30%, by how many years would the pavement's design life be reduced? For SN, please round-off to the nearest whole number if necessary
Compute the modulus of elasticity of pavement if the modulus of elasticity of subgrade is 15MPa with a stiffness factor of 0.50.
Pls answer w/ complete solution. Asap (Transportation Engineering) Determine the thickness base and subgrade of flexible pavement if the wheel load is 90 kN and has wheel contact area of 88075 sq. mm.. Strength capacity of base is 0.35 MPa and 0.15 MPa for Subgrade.