A sand sample of 35 sq. cm cross sectional area and 20 cm long was tested in a constant head permeameter. Under a head of 60 cm, the discharge was 120 ml in 6 min. The dry weight of sand used for the test was 1120 g, and Gs = 2.68 1. Determine the hydraulic conductivity in cm/sec. 2. Determine the discharge velocity in cm/sec 3. Determine the seepage velocity in cm/sec

A sand sample of 35 sq. cm cross sectional area and 20 cm long was tested in a constant head permeameter. Under a head of 60 cm, the discharge was 120 ml in 6 min. The dry weight of sand used for the test was 1120 g, and Gs = 2.68 1. Determine the hydraulic conductivity in cm/sec. 2. Determine the discharge velocity in cm/sec 3. Determine the seepage velocity in cm/sec

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter6: Hydraulic Conductivity

Section: Chapter Questions

Problem 6.7P

See similar textbooks

Similar questions

A double drain consolidation test was performed on a sample of marine clay. The thickness of the clay layer is 50mm and the hydraulic conductivity during the test was 1,753x10-8 m/min. During the test the following data were determined. σ '1= 300 ??/?2 e= 0.42 σ '2= 500 ??/?2 , e=0.30 Determine: The time to reach 75% consolidation The excess water pressure value after 50 min of starting the test at 10 mm depth
For a falling-head permeability test, the following values are given: Length of specimen = 200 mm Area of soil specimen = 1000 mm^2 Area of standpipe = 40 mm^2 Head difference at time t = 0 = 500 mm Head difference at timt t = 3 minutes = 300 mm Determine the hydraulic conductivity of the soil in ×10−4cmsec Please answer this asap. For upvote. Thank you very much
(i) Determine the hydraulic conductivity of the soil (m/sec)(ii) What was the head difference at t = 5 minutes?
For a falling head permeability test, these valueare given: Length of the soil specimen = 200 mm Area of the soil specimen = 1000 mm2 Area of the standpipe = 40 mm2 Head difference at time, t = 0 min is 500 mm Head difference at time, t = 3 min is 300 mm1. Determine the hydraulic conductivity of thesoil in cm/sec.2. What was the head difference at time, t =100 sec?
For a constant head laboratory permeability test on fine sand, the following values are given: Length of specimen, L = 16inches Diameter of specimen, D = 3inches Head difference, h = 23inches Water collected in 120 seconds = 0.057cu.in Void ratio, e = 0.38 a. Determine the hydraulic conductivity (in/min) of the soil. b. Determine the discharge velocity (in/min) through the soil. c. Determine the seepage velocity (in/min) Please answer this asap for upvote. Thank you in advance
For a constant head laboratory permeability test on a fine sand, the following are given:Length of specimen = 250 mmDia. of specimen = 62.5 mmHead difference = 450 mmWater collected in 2 min. = 484 cu.mmDetermine the discharge velocity in mm/sec.
A falling-head permeameter containing a silty, fine sand has a falling-head tube diameter of 4.2 cm, a sample diameter of 10.4 cm, and a length of 15.6 cm. The initial head is 15.5 cm. It falls to 1.4 cm over a period of 468 min. Find the hydraulic conductivity.
Show calculation on how to determine the average coefficient of permeability of the sand sample at 20°C. Also show calculations on how to determine the discharge the K1 and Average K1
For a falling head laboratory test, the following are the given values:• Length of soil specimen = 210.00 mm• Initial head = 523.00 mm• Final head = 297.00 mm• Duration of test = 3.50 mins• Area of standpipe = 42.0 sq.mm• Area of specimen = 1050.00 sq.mmA. Compute for the hydraulic conductivity of the soil in cm/sec.B. Determine the seepage velocity if n=0.35C. Determine the head difference at t = 120 sec
b) For a constant head permeability test on a sand, these values are given:Length of the specimen = 720 mmDiameter of the soil specimen = 210 mm2Head difference = 990 mmWater collected in 5.5 min = 635 cm3Void ratio of the soil = 0.54Hence, determine:i) Hydraulic conductivity of the soilii) Discharge velocityiii) Seepage velocity
An unconfined aquifer is 100 feet thick was evaluated using a field pumping test. The depth to groundwater is 10 feet. At a distance of 1000 feet, the drawdown was 40 feet, and at a distance of 5000 feet it was 20 feet. Find the permeability of the aquifer assuming that a steady-state of 960 gal/minute during the test in ft/sec.
A constant head permeability test was carried out on a sample of sand. The diameter and the length of the sample were 10 and 20 cm. respectively. The head of water was maintained at 35 cm. If 110 cm3 of water is collected in 80 seconds, compute the hydraulic conductivity of the sand.