. A shaft has three eccentrics, each 75 mm diameter and 25 mm thick, machined in one piece withthe shaft. The central planes of the eccentric are 60 mm apart. The distance of the centres from theaxis of rotation are 12 mm, 18 mm and 12 mm and their angular positions are 120° apart. Thedensity of metal is 7000 kg/m2.Find the amount of out-of-balance force and couple at 600 r.p.m. If the shaft is balanced by addingtwo masses at a radius 75 mm and at distances of 100 mm from the central plane of the middleeccentric, find the amount of the masses and their angular positions.n.3- Explain, how can you eliminate interference in gears?

Note: Since you have asked multiple question, we will solve the first question for you. If you want…

- A shaft has three eccentrics, each 75 mm diameter and 25 mm thick, machined in one piece with the shaft. The central planes of the eccentric are 60 mm apart. The distance of the centres from the axis of rotation are 12 mm, 18 mm and 12 mm and their angular positions are 120° apart. The density of metal is 7000 kg/m³. Find the amount of out-of-balance force and couple at 600 r.p.m. If the shaft is balanced by adding two masses at a radius 75 mm and at distances of 100 mm from the central plane of the middle eccentric, find the amount of the masses and their angular positions.

- A shaft has three eccentrics, each 75 mm diameter and 25 mm thick, machined in one piece with the shaft. The central planes of the eccentric are 60 mm apart. The distance of the centres from the axis of rotation are 12 mm, 18 mm and 12 mm and their angular positions are 120° apart. The density of metal is 7000 kg/m³. Find the amount of out-of-balance force and couple at 600 r.p.m. If the shaft is balanced by adding two masses at a radius 75 mm and at distances of 100 mm from the central plane of the middle eccentric, find the amount of the masses and their angular positions.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

___________mm4 is the polar moment of inertia of a hollow shaft if its external diameter is 150mm and thickness is 25 mm.
Six 30 mm diameter bolts in the outer bold circle of 370 mm radius are steel and six 20 mm diameter bolt in the inner bolt circle of 260 mm diameterare aluminum. What is the torque capacity of the coupling? Assume thatthe allowable shearing stress for the steel bolts is 40 Mpa and aluminumbolts of 30 Mpa. The Shear modulus of elasticity of aluminum and steel are28 Gpa and 84 Gpa, respectively.
A circular shaft with 50mm and its lenght is 850mm long and is made of steel, the shaft is subjected to a torque of 800Nm. Compute the angle of twist of one end in relation to the other.
For the same cross-sectional area A , for a square cross-sectional area shaft and a circular cross-sectional area shaft, both of length l, in torsion which has the greater angular twist θ, and by what multiple is it greater ?
A circular shaft with diameter 50mm and its length is 850mm long and is made of steel,The shaft is subjected to a torque of 800Nm. Compute the angle of twist of one end inrelation to the other.
two cylinders are connected to form a parallel cylinder actuatingsystem. Assume the bore and rod diameters of the left cylinder are 120 mm and 60 mm, respectively, and that those of the right cylinder are 100 mm and 50 mm. If the mass of the external loads to be driven by the left and right cylinders are 750 and 500 kg, respectively, and the back pressure in both rod-end chambers is 200 kPa, calculate the operating pressure of each cylinder for driving the loads. (Assume that the left cylinder requires 550 kPa for no-load extension and the right one requires 500 kPa.) If the supplying flow is 150 L ・ min−1, what are the extending velocities of those cylinders? Consider the friction and back pressure for the design Will those two cylinders extend simultaneously under the stated condition
find omega ab and omega prime ab. Cylinder D rolls without slipping with an angular motion given as
A 39 in. tubular shaft is in torsion under a torque of 34 lb-in.. Its cross-section shown below as diameter d1 = 3.2 in., diameter d2 = 1.4 in. If it is a soft tube, and G = 315 psi, calculate the angle of twist of the shaft: _____ O (degrees). Pay attention to units, and calculate your answer to one decimal place.
A 10" in diameter helical gear carries a torque of 3,000 in-lb. It has 20 deg. Involute stub teeth and a helix angle of 30 deg. Determine: (a) the tangential component of the load on the teeth in the plane of rotation; (b) the separating component of the load on the teeth; (c) the angle of obliquity in th plane normal to the pitch element of the tooth, and (d) the resultant load on the tooth
d = 30 mm diameter, solid, ductile no.11 m from end A of vertical shaft AB made of materialtightly fitted to a radius disc, at end B to the groundfixed. From the C point of the disk - parallel to the y axisA force of F = 20 kN will be applied. Safety of the shaftcontrol according to Tresca criterion and Von-Mises criteriondo. (Due to the tight fit, the shaft is in the hole in the disc.cannot rotate freely.)
A hollow shaft with a length of 1103mm and outer diameter 73mm and inner diameter 50mm is required to tranmit a power of 60kW at a speed of 2950 rpm if the modulus of rigidity is 79.5GPa calculate the angle of twist in degrees
Determine the diameter of a solid shaft in mm to be used for a 373-kW, 250 rpm application if the allowable torsional deflection is 1 deg in a length of 18-diameters and the allowable stress is 70 MPa. Use modulus of rigidity of 90 GPa.