A simple beam AB supports two connected wheel loads P and 2P that are distance d apart. The wheels may be placed at any distance x from the left-hand support of the beam. 2P a) Determine the distance x that will produce the maximum shear force in the beam and the maximum shear force Vmax. b) Determine the distance x that will produce the maximum bending moment in the beam and draw the corresponding bending moment diagram. (Assume P = 10 kN , d = 2.4 m, and L = 12 m.)

A simple beam AB supports two connected wheel loads P and 2P that are distance d apart. The wheels may be placed at any distance x from the left-hand support of the beam. 2P a) Determine the distance x that will produce the maximum shear force in the beam and the maximum shear force Vmax. b) Determine the distance x that will produce the maximum bending moment in the beam and draw the corresponding bending moment diagram. (Assume P = 10 kN , d = 2.4 m, and L = 12 m.)

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter10: Statically Indeterminate Beams

Section: Chapter Questions

Problem 10.4.32P: Two identical, simply supported beams AB and CD are placed so that they cross each other at their...

See similar textbooks

Similar questions

A gantry crane of weight W=100 Kg moves across a bridge with the length I=5 m. The front axle of the crane (which is nearer end A) carries 3/4W whereas the rear axle (nearer end B) carries 1/4 W. The distance of the axles is b = 1/20. Determine the maximum value of the bending moment and enter your answer in N-m units.. Remember to also show all your work (FBDs, calculation steps, etc on the handworked file) HINT: Determine the shear and bending moment equations along the beam. Assume only concentrated loads at the front and rear axles.
A gantry crane of weight W=100 Kg moves across a bridge with the length /=5 m. The front axle of the crane (which is nearer end A) carries 3/4W whereas the rear axle (nearer end B) carries 1/4 W. The distance of the axles is b = 1/20. Determine the maximum value of the bending moment and enter your answer in N-m units.. Remember to also show all your work (FBDs, calculation steps, etc on the handworked file) HINT: Determine the shear and bending moment equations along the beam. Assume only concentrated loads at the front and rear axles. So it’s wrong answer 1136 N can anyone how to solve for it different ?
) A simply supported beam of length L=12 m, carrying UDL 10 KN/m in its entire length of thebeam. Draw the Shear Force (S.F) and Bending Moment (B. M) of the beam.Write down the maximum value of B.M
Draw the shear-force and bending-moment diagram for the beam shown. Assume the upward reaction provided by the ground to be uniformly distributed. Let a = 5.0 ft, b = 3.4 ft, P = 25 kips, and w = 1.1 kips/ft. Label all significant points on each diagram. Determine the maximum value of (a) the internal shear force and (b) the internal bending moment.Note that answers may be positive or negative. Here, "maximum" refers to the largest magnitude value, but you should enter your shear force and bending moment with the correct sign, using the sign convention presented in Section 7.2 of the textbook. If the magnitudes of the largest positive and largest negative values are the same, enter a positive number.
The maximum normal bending stress in a beam, Mc/I, occurs along the beam where the bending moment is
Draw the shear force and bending moment diagrams of the given simple headstock beam? can you solve it step by step!
An extruded polymer beam is subjected to a bending moment M. The length of the beam is L = 620 mm. The cross-sectional dimensions of the beam are b1 = 39 mm, d1 = 82 mm, b2 = 23 mm, d2 = 23 mm, and a = 8 mm. For this material, the allowable tensile bending stress is 20 MPa, and the allowable compressive bending stress is 12 MPa. Determine the largest moment M that can be applied as shown to the beam.
Consider a 6−m6−m long horizontal beam supported by a pin at one end and a roller at the other end. If a 30kN⋅m30kN⋅m bending moment is applied at the roller end of the beam, what is the internal bending moment at a distance of 2m2m from the pin?
For a loaded cantilever beam of uniform cross section, the bending moment along the length is M(x) = 5x2 + 10x, where x is the distance in mm measured from the free end of the beam. What is the magnitude of shear force in the cross section at x = 10 mm.
Mechanics of deformable bodies: shear and moment diagram in beams. From the given figures below, draw the shear and moment diagram of the beam. Its either using the shear and moment diagram or area method. Please show the solving solution also.
At a full draw, an archer applies a pull of 130 Nto the bowstring of the bow shown in the figure. Determinethe bending moment at the midpoint of the bow.
Consider the beam shown. Suppose that w1 = 600 N/m , w2 = 300 N/m . Follow the sign convention. A) Determine the internal normal force at point C. NC = ? B) Determine the internal shear force at point C. VC = ? C) Determine the internal moment at point C. MC = ?