A simply supported beam of span 5 m and cross-section 200 mm x 600 mm is subjected to auniformly distributed load of 30 kN/m including self-weight. A plane inclined at 60° to the axis of thebeam is passing through a point P located on the central cross-section of the beam and 200 mmabove the neutral axis. Find the normal stress and shear stress on the inclined plane at point P.30 kN/m+ 200 mm200 mmNA600 mm60°2.5m-2.5 m

Step 1: L=5m B=200mm D=600 mm w = 30 kN/m θ=60 deg e=200mm

A simply supported beam of span 5 m and cross-section 200 mm x 600 mm is subjected to a uniformly distributed load of 30 kN/m including self-weight. A plane inclined at 60° to the axis of the peam is passing through a point P located on the central cross-section of the beam and 200 mm above the neutral axis. Find the normal stress and shear stress on the inclined plane at point P. N 30 kN/m 200 mm P 200 mm NA

A simply supported beam of span 5 m and cross-section 200 mm x 600 mm is subjected to a uniformly distributed load of 30 kN/m including self-weight. A plane inclined at 60° to the axis of the peam is passing through a point P located on the central cross-section of the beam and 200 mm above the neutral axis. Find the normal stress and shear stress on the inclined plane at point P. N 30 kN/m 200 mm P 200 mm NA

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Determine the maximum shear stress if its used as a 8m beam simply supported at the left end and 2m from the right and which carries a total uniform load of 40kN/m.
A 5-m propped beam carries a uniformly distributed load equal to 45 kN/m applied throughout the beam. If the reaction at the roller is 84.375 kN, what is the maximum flexural shear stress if the beam has a rectangular cross-section with b = 300 mm and h = 600 mm? (in MPa)
1. A 75 mm x 75 mm x 8 mm angle is used as a beam over a span of 7.0 m. It is subjected to loading of 10 kN/m acting in the vertical plane passing through the centroid of the Section Determine maximum stress induced in the section.
A beam of channel section 120 mm x60 mm has uniform thickness of 15 mm. Determine the shear stress in web and flanges where shearing force is 40 kN.
P = 15 kN Determine the normal and shearing stress at point a, b, and c.
A 0.2 m diameter shaft is supported by a smooth journal bearing at E and a smooth thrust bearing at F. Determine the maximum shear stress developed in segment BC of the shaft. 43.33 MPa 35.01 MPa 13.12 MPa 22.11 MPa
The simply supported beam of rectangular cross section carries a distributed load of intensity w0 = 3 kN/m and a concentrated force P. Determine the largest allowable value of P (KN) if the bending stress is not to exceed 10 MPa.
If the T-beam is subjected to a vertical shear V = 14 kips, determine the maximum shear stress (ksi) in the beam Where: tf = 2.4 in and d = 7 in
If the beam is subjected to a shear force of V=40kN, a. Compute the maximum shear stress b. Compute the shear stress 10mm below the uppermost part of the cross section of the beam.
The Beam has a span of 9 m, fixed at both ends and carries a uniformly distributed load of w = 25 kN/m throughout its length. The beam is W 16 x 77 with the following properties: bf = 260 mm tf = 19.3 mm d = 420 mm tw = 11.6 mm Ix = 462. 02 x 106 mm4 Iy = 57.44 x 106 mm4 a. Calculate the maximum bending stress in the beam, in MPA. b. Calculate the average shearing stress in the web, in MPa.
A simply supported beam is 3m long. It carries a uniformly distributed load of 6 kN/m throughout its span and a concentrated load of 15 kN at a point 2 m from the left support.1. what most nearly gives the maximum shear developed in the beam?2. what most nearly gives the maximum moment developed in the beam?3. Assuming that the beam has a rectangular shape whose width and depth are 150 mm and 250 mm, respectively, which of the following most nearly gives the maximum flexural stress developed in the beam?
A. Determine the maximum bearing stress in MPa if P = 115 kN. B. Determine the maximum shear stress in MPa if P = 115kN. C. Determine the maximum tensile stress in MPa if P = 11 kN.